Industrial category
Refractories
Turkish manufacturers and suppliers in Refractories.
Popular products
Aydınlar Refrakter Sanayi ve Ticaret A.Ş.
Castable Refractories (Refractory Concretes)
Refractories ProductHeat-resistant refractory concretes produced with special binders and raw materials, suitable for high-temperature service. Medium, low and ultra-low cement, cement-free and insulating grades are available. Used in iron and steel, foundries, refineries, petrochemicals, power plants and cement as the main material for burner surrounds, ladles, baffles, doors, arches, covers and stacks.
Kocaeli · Gebze Organized Industrial Zone
Aydınlar Refrakter Sanayi ve Ticaret A.Ş.
Ramming (Plastic) Refractories
Refractories ProductReady-to-use materials applied by ramming or compaction, which set after drying through heat or chemical binders. Ceramic-bonded and phosphate-bonded grades are available. Applied with a pneumatic rammer. Used as the main lining material in furnaces, burner zones and ladles, and for patching and repair of brick and castable linings.
Kocaeli · Gebze Organized Industrial Zone
Aydınlar Refrakter Sanayi ve Ticaret A.Ş.
Gunning (Shotcrete) Refractories
Refractories ProductUnshaped refractory mixes used to repair the linings of thermal furnace equipment by gunning. They consist of a 0-5 mm particle grading with chemical binder and additives, in cement-bonded and cement-free grades. Used to gun new linings and repair furnace tubes, extending furnace service life. Applied with a pneumatic gunning machine.
Kocaeli · Gebze Organized Industrial Zone
Ateş Seramik Refrakter A.Ş.
Pipe Brick Series
Refractories ProductCeramic pipe brick series for foundry runner systems. Produced in standard sizes with inner diameter (Ø) from 30 mm to 150 mm and outer diameter (ØA) from 55 mm to 200 mm: 30/55, 40/65, 50/75, 60/85, 70/100, 80/115, 90/120, 100/140, 120/160 and 150/200 mm. Length (L) options are 50, 100, 150, 200 and 300 mm. All dimensions in mm.
Düzce · Duzce Gumusova Organized Industrial Zone
Popular services
Aydınlar Refrakter Sanayi ve Ticaret A.Ş.
Refractory Engineering and Supervision Services
Refractories ServiceTechnical support is provided from refractory material selection to project design, application, maintenance and relining. The scope covers refractory lining design, heat transfer calculations, installation supervision, drying curves and drying process services. The aim is more efficient, safe and long-lasting operation of high-temperature equipment.
Kocaeli · Gebze Organized Industrial Zone
Ateş Seramik Refrakter A.Ş.
Custom-Dimension Refractory Production
Refractories ServiceBeyond the standard tables, ceramic runner and refractory products such as rotary runners, funnels, elbows, rings, distributors, stopper and ladle shaft bricks can be produced in the dimensions requested by the customer. Products are made at the factory in Gümüşova OIZ for foundries and steel mills.
Düzce · Duzce Gumusova Organized Industrial Zone
Ateş Seramik Refrakter A.Ş.
Monolithic Refractory Supply
Refractories ServiceIn addition to ceramic runners and refractory bricks, Ateş Seramik meets the monolithic refractory demands of foundries, iron and steel plants, power plants, refineries, sugar and cement factories and steel mills. The product group covers feeder sleeves and monolithic mortars.
Düzce · Duzce Gumusova Organized Industrial Zone
Ateş Seramik Refrakter A.Ş.
Kaolin Sintering
Refractories ServiceKaolin imported raw from Ukraine is sintered at the factory in Gümüşova OIZ and supplied to refractory manufacturers. The factory also produces exothermic feeders and breaker cores with an annual capacity of 2,500,000 pieces.
Düzce · Duzce Gumusova Organized Industrial Zone
Top industrial zones
Products in This Category
Approved supplier product catalogs in this category.
Aydınlar Refrakter Sanayi ve Ticaret A.Ş.
Castable Refractories (Refractory Concretes)
Refractories ProductHeat-resistant refractory concretes produced with special binders and raw materials, suitable for high-temperature service. Medium, low and ultra-low cement, cement-free and insulating grades are available. Used in iron and steel, foundries, refineries, petrochemicals, power plants and cement as the main material for burner surrounds, ladles, baffles, doors, arches, covers and stacks.
Kocaeli · Gebze Organized Industrial Zone
Aydınlar Refrakter Sanayi ve Ticaret A.Ş.
Ramming (Plastic) Refractories
Refractories ProductReady-to-use materials applied by ramming or compaction, which set after drying through heat or chemical binders. Ceramic-bonded and phosphate-bonded grades are available. Applied with a pneumatic rammer. Used as the main lining material in furnaces, burner zones and ladles, and for patching and repair of brick and castable linings.
Kocaeli · Gebze Organized Industrial Zone
Aydınlar Refrakter Sanayi ve Ticaret A.Ş.
Gunning (Shotcrete) Refractories
Refractories ProductUnshaped refractory mixes used to repair the linings of thermal furnace equipment by gunning. They consist of a 0-5 mm particle grading with chemical binder and additives, in cement-bonded and cement-free grades. Used to gun new linings and repair furnace tubes, extending furnace service life. Applied with a pneumatic gunning machine.
Kocaeli · Gebze Organized Industrial Zone
Ateş Seramik Refrakter A.Ş.
Pipe Brick Series
Refractories ProductCeramic pipe brick series for foundry runner systems. Produced in standard sizes with inner diameter (Ø) from 30 mm to 150 mm and outer diameter (ØA) from 55 mm to 200 mm: 30/55, 40/65, 50/75, 60/85, 70/100, 80/115, 90/120, 100/140, 120/160 and 150/200 mm. Length (L) options are 50, 100, 150, 200 and 300 mm. All dimensions in mm.
Düzce · Duzce Gumusova Organized Industrial Zone
Ateş Seramik Refrakter A.Ş.
Funnel Brick Series
Refractories ProductCeramic funnel (pouring cup) brick series used at the entry of foundry runner systems. Produced in many standard sizes with bottom diameter Ø1 of 40, 50 and 60 mm, top diameter Ø2 of 100–135 mm, ØA 126–160 mm, ØB 64–84 mm and overall height H1 from 190 to 425 mm. All dimensions in mm; production in requested dimensions is available.
Düzce · Duzce Gumusova Organized Industrial Zone
Ateş Seramik Refrakter A.Ş.
Rotary Runner
Refractories ProductCeramic rotary runner produced in types F60, F80, F100 and F120. Main inner diameter Ød is 60, 80, 100 and 120 mm; outer diameter Ød1 110–165 mm; overall height H is 580 mm (F60), 710 mm (F80), 879 mm (F100) and 919 mm (F120). All dimensions in mm; production in requested dimensions is available.
Düzce · Duzce Gumusova Organized Industrial Zone
Refsan Refrakter İnşaat ve İnşaat Malzemeleri Ltd. Şti.
Induction Furnace Linings and Casting Refractories
Refractories ProductThe casting refractories group consists of ladle linings, repair materials, coil grout materials and induction furnace linings (RF-5 PA, RF-5 PS). In neutral lining sintering, clean scrap is placed in the furnace after ramming; the scrap must not touch the former's side walls and the sintering former must be steel or stainless.
İstanbul
Refsan Refrakter İnşaat ve İnşaat Malzemeleri Ltd. Şti.
Monolithic Refractory Castables
Refractories ProductThe monolithic refractories group consists of conventional castables, low cement castables, ultra low cement castables, spinel castables, gunning castables, insulating castables and self flowing castables. The series is produced under the codes RB-40, RB-50, RB-60, RB-75, RB-85 and RB-95.
İstanbul
Refsan Refrakter İnşaat ve İnşaat Malzemeleri Ltd. Şti.
RB-85L Furnace Mouth Castable
Refractories ProductRB-85L is used as a mouth repair material in induction furnaces with acidic and neutral linings. Part is mixed with 3% water for a thick consistency and part with 8% water for a fluid consistency; it is applied once liquid metal reaches 1/3 of the total level and, since it hardens within 5-10 minutes, shaping is finished quickly.
İstanbul
Aslan Endüstri Vinç Makina Ltd. Şti.
Refractory Mortar
Refractories ProductMortar produced from fine-grained refractory aggregate, refractory powder, binder and other additives, used for laying and bonding refractory bricks and for lining repair in glass furnaces, coke ovens, reheating furnaces, heat exchangers, boilers and other industrial furnaces. Fireclay, high-alumina, silica, mullite, magnesia, insulating and zircon refractory mortars are produced and supplied.
Kocaeli
Services in This Category
Approved supplier service catalogs in this category.
Aydınlar Refrakter Sanayi ve Ticaret A.Ş.
Refractory Engineering and Supervision Services
Refractories ServiceTechnical support is provided from refractory material selection to project design, application, maintenance and relining. The scope covers refractory lining design, heat transfer calculations, installation supervision, drying curves and drying process services. The aim is more efficient, safe and long-lasting operation of high-temperature equipment.
Kocaeli · Gebze Organized Industrial Zone
Ateş Seramik Refrakter A.Ş.
Custom-Dimension Refractory Production
Refractories ServiceBeyond the standard tables, ceramic runner and refractory products such as rotary runners, funnels, elbows, rings, distributors, stopper and ladle shaft bricks can be produced in the dimensions requested by the customer. Products are made at the factory in Gümüşova OIZ for foundries and steel mills.
Düzce · Duzce Gumusova Organized Industrial Zone
Ateş Seramik Refrakter A.Ş.
Monolithic Refractory Supply
Refractories ServiceIn addition to ceramic runners and refractory bricks, Ateş Seramik meets the monolithic refractory demands of foundries, iron and steel plants, power plants, refineries, sugar and cement factories and steel mills. The product group covers feeder sleeves and monolithic mortars.
Düzce · Duzce Gumusova Organized Industrial Zone
Ateş Seramik Refrakter A.Ş.
Kaolin Sintering
Refractories ServiceKaolin imported raw from Ukraine is sintered at the factory in Gümüşova OIZ and supplied to refractory manufacturers. The factory also produces exothermic feeders and breaker cores with an annual capacity of 2,500,000 pieces.
Düzce · Duzce Gumusova Organized Industrial Zone
Suppliers in This Category
17 suppliers
For buyers
Get quotes from Refractories suppliers
Browse company profiles below or describe your need to collect multiple quotes in Refractories quickly.
-
Company profiles and certifications
-
Multiple quotes from one RFQ
-
Filter by capability and location
Browse Related Categories
Discover suppliers in adjacent industrial sectors.
General
Cross-industry blog posts and TurkIndustry announcements.
Metal Processing
Turkish manufacturers and suppliers in Metal Processing.
Adhesives & Sealants
Turkish manufacturers and suppliers in Adhesives & Sealants.
Plastics & Rubber
Turkish manufacturers and suppliers in Plastics & Rubber.
Automation & Electronics
Turkish manufacturers and suppliers in Automation & Electronics.
Casting
Turkish manufacturers and suppliers in Casting.
Chemicals
Turkish manufacturers and suppliers in Chemicals.
Sheet Metal
Turkish manufacturers and suppliers in Sheet Metal.
Featured Supplier Profiles
Capability, certification, and export profiles with enough suppliers in this category.
Construction — Refractories suppliers
10 listed suppliers
CertificationISO 9001 certified Refractories suppliers
9 listed suppliers
MaterialCeramic (General) — Refractories manufacturers
9 listed suppliers
IndustryEnergy — Refractories suppliers
9 listed suppliers
IndustryChemicals — Refractories suppliers
8 listed suppliers
MaterialAlumina Ceramic — Refractories manufacturers
6 listed suppliers
IndustryOil & Gas — Refractories suppliers
6 listed suppliers
ProcessSerial Production — Refractories manufacturers
5 listed suppliers
ProcessHigh-Volume Production — Refractories manufacturers
5 listed suppliers
CertificationISO 14001 certified Refractories suppliers
3 listed suppliers
ExportRefractories suppliers exporting to Germany
3 listed suppliers
ExportRefractories suppliers exporting to France
3 listed suppliers
Featured Product Catalogs
Standard product types with enough suppliers in this category.
Find the right supplier or list your company
Send RFQs as a buyer or publish your company profile in this category.