Pumps, Valves & Accessories

Kuzey Boru A.Ş.

HDPE PE100 Pipe Systems

Kuzeyboru PE pipes are produced from polyethylene to TS EN 12201-1 and TS EN 12201-2. Diameters run from 20 mm to 1600 mm and pressure classes from SDR41–PN4 to SDR6–PN32. Coils are available up to Ø125 mm; larger sizes are supplied in straight lengths. Typical uses are drinking water, natural gas (PE80/PE100), irrigation, sewage, drainage, industrial lines and marine outfalls.

Aksaray · Kirimli Organized Industrial Zone

Kuzey Boru A.Ş.

GRP Pipe and Fittings

GRP pipes are made at the 64,368 m² Malatya plant by continuous filament winding. Diameters range from 300 mm to 4000 mm; lengths of 12 m and 15 m are produced according to transport limits. The wall is a five-layer structure of glass fibre, thermoset resin and silica sand. Applications include drinking water, sewage, irrigation, marine outfalls, power plants and jacking. Tees, elbows, reducers, flanges and couplings are made in the same plant.

Aksaray · Kirimli Organized Industrial Zone

Kuzey Boru A.Ş.

Corrugated Pipe Systems

Corrugated pipes are produced to TS EN 13476-3 in DN100–1000 with or without sockets, and as steel-reinforced spiral pipe to TSEK-2 in 800–2400 mm. Polyethylene melt flow at 190°C/5 kg is ≤1.6 g/10 min and density ≥930 kg/m³. Ring stiffness per ISO 9969 meets SN4 and SN16. Couplings, elbows, reducers, Y and C fittings, end caps and tees are used on sewer, stormwater and drainage lines.

Aksaray · Kirimli Organized Industrial Zone

Emse Pompa

EVYP Oil-Lubricated Vacuum Pumps

EVYP oil-lubricated vacuum pumps use an eccentric rotor in a stator. Gas is taken from the top, compressed in vane chambers and separated from oil in a tank; oil returns through a filter. They are coupling-driven, air-cooled, on rubber mounts, with a check valve. Uses: vacuum packing, handling, medical vacuum, tunnelling, wood forming, electronics, food and plastic thermoforming.

İstanbul

Emse Pompa

Two-Stage Liquid Ring Vacuum Pumps

Emse two-stage liquid-ring vacuum pumps are designed for high efficiency at low pressure. The water-ring principle takes various gases and vapours. Flow is listed 200–3500 m³/h, 735 mmHg, recommended temperature +25 °C, connections DN50–DN150. Uses include chemicals, food packing, pharmaceuticals and laboratory vacuum.

İstanbul

Emse Pompa

Monoblock Liquid Ring Vacuum Pumps

Emse monoblock liquid-ring vacuum pumps are compact. The standard series is listed at 25–100 m³/h, 735 mmHg, max +25 °C, 1"–1½" connections. B series is 70–350 m³/h, DN40–DN80. The water-ring principle is used for gas and vapour; the site also names them liquid ring vacuum pumps.

İstanbul

Erem Pazarlama Isı ve Mad. San. Tic. Ltd. Şti.

INFIT 130 Tee

INFIT 130 TE is the threaded cast-iron tee in the same family as 90° elbows and nipples, stocked black and galvanized in 1/2"–4". The About page defines the core business as sales and marketing of cast-iron, steel, galvanized and black pipe fittings plus PTFE and hemp accessories. Certified, reliable products and continuous supply from strong stock are emphasised. Shipments leave Beylikdüzü OSB Mah. 9th Street No:17 for all of Turkey.

İstanbul · Beylikduzu Organized Industrial Zone

Erem Pazarlama Isı ve Mad. San. Tic. Ltd. Şti.

INFIT 280 Nipple

INFIT 280 is the threaded cast-iron nipple used to extend or join lines, distinct from the 90 elbow and 130 tee. JIANZHI galvanized/black and ERM steel nipples complete the same size family; the erp brand covers hemp, PTFE tape and auxiliary connection materials. Erem Pazarlama uses domestic and international supply links under a right-quality, right-price, on-time-delivery principle. TSE-certified items are offered via the price-list and documents pages.

İstanbul · Beylikduzu Organized Industrial Zone

Erem Pazarlama Isı ve Mad. San. Tic. Ltd. Şti.

INFIT 90 Elbow 1/2"–4"

The İNFİT brand covers threaded cast-iron pipe fittings; 90° elbows are stocked in 1/2"–4" black and galvanized. Since 2007 Erem Pazarlama has sold and marketed cast-iron, steel, galvanized and black pipe fittings from Beylikdüzü OSB. JIANZHI galvanized/black and ERM steel fittings sit in the same portfolio. Planned, fast shipment to every region of Turkey and continuous supply from a broad inventory are published.

İstanbul · Beylikduzu Organized Industrial Zone

Argus Makine Ekipmanları San. ve Tic. Ltd. Şti.

Magnetic-Drive Pump

Magnetic-drive pumps are in the Allweiler and Greenpumps Caster magnetic-drive groups. Seal-less magnetic coupling is used for leak-tight chemical transfer. They are supplied with chemical pumps and the Greenpumps family. Argus sells and supports spare parts from the Ikitelli warehouse.

İstanbul · Ikitelli Organized Industrial Zone

Argus Makine Ekipmanları San. ve Tic. Ltd. Şti.

Sundyne API 610 Pump

Sundyne Marelli API 610 pumps and Sunflo HMP process pumps are in the Argus catalogue. API 610 OH2 and related types are used in chemical and energy processes. They are offered with Sundyne API 617 process gas compressors. Heavy-duty skid and baseplate units appear in site photographs.

İstanbul · Ikitelli Organized Industrial Zone

Argus Makine Ekipmanları San. ve Tic. Ltd. Şti.

Allweiler Hot-Oil Pump

Allweiler hot-oil and hot-water pumps (NBT, NTWH, CTWH, ALLHEAT) are in the Argus range. They are used on thermal-oil and high-temperature fluid lines. They are offered with Allweiler three-screw, progressive-cavity and centrifugal series. Supply and technical support are from Ikitelli Eskoop A2 Block.

İstanbul · Ikitelli Organized Industrial Zone

Kuzey Boru A.Ş.

After-Sales Technical Support

After-sales support covers site welding, jointing and installation guidance, first-run checks and system follow-up. Direct access to technical specialists, spare fittings, warranty reporting and post-installation inspection are included. Field crews on GRP, HDPE, corrugated, PPR and PVC lines receive support during installation.

Aksaray · Kirimli Organized Industrial Zone

Emse Pompa

Project-Based Pump Systems

About lists special-engineering pump systems and project-based pump solutions. Applications include refineries, energy, chemicals, food, ships and fire systems. Stainless steel, cast bodies, bronze impellers, special coatings and API 682 seal plans are applied to specification. Exports to more than 40 countries have run since 2005.

İstanbul

Emse Pompa

Vacuum Pump Technical Support

Vacuum pumps are manufactured and supported by 80 staff at the 12,000 m² Hadımköy plant. Two-stage, monoblock and EVYP oil lines are selected via PSP. Factory: Yassıören Mah. Akpınar Sanayi Bölgesi Mediha Sok. No:12, tel +90 212 501 00 71. Domestic sales lines and Çorlu, Karaköy and Bayrampaşa shops are on the contact page.

İstanbul

Emse Pompa

Pump Selection and Engineering

Emse states it supplies pump production, technical selection, engineering and project solutions for Turkey, Europe, the Middle East, Iraq, Azerbaijan, Russia and international projects. Vacuum, gear, centrifugal and fire pumps are selected in the same engineering scope. The PSP pump-selection programme is published on product pages. Mechanical/cartridge seals, Ex or diesel motors and API 682 plans can be applied.

İstanbul

Erem Pazarlama Isı ve Mad. San. Tic. Ltd. Şti.

Stocked Fittings Supply

Strong stock: continuous supply from a high-capacity inventory. Core business is sales and marketing of cast-iron, steel, galvanized and black pipe fittings plus PTFE, hemp and similar accessories. Certified, reliable products and TSE documentation are published. Orders are fulfilled from Beylikdüzü OSB Mah. 9th Street No:17.

İstanbul · Beylikduzu Organized Industrial Zone

Erem Pazarlama Isı ve Mad. San. Tic. Ltd. Şti.

Dealer Network

Erem Pazarlama states that it serves every region of Turkey and operates with a strong supply network in fittings. İNFİT cast iron, JIANZHI galvanized/black, ERM steel and erp PTFE/hemp lines are offered to dealers and wholesalers. Price-list download and product-group pages are published. The head office is in Beylikdüzü Organized Industrial Zone.

İstanbul · Beylikduzu Organized Industrial Zone

Erem Pazarlama Isı ve Mad. San. Tic. Ltd. Şti.

Nationwide Delivery

The About page publishes a planned, fast shipping approach and service to every region of Turkey. Continuous supply from broad inventory is run from the Beylikdüzü OSB warehouse with a same-day dispatch target. İNFİT, JIANZHI, ERM and erp fittings and accessories ship from 9th Street No:17. Contact is +90 212 852 34 00 and [email protected].

İstanbul · Beylikduzu Organized Industrial Zone

Argus Makine Ekipmanları San. ve Tic. Ltd. Şti.

Field Installation Support

Field installation and commissioning support for pump and turbine units is among Argus services. Photographs show a technician on a turbine rotor and a blue pump installation outdoors. On-site support is given for Allweiler and Sundyne units. Coordination is from the Ikitelli office.

İstanbul · Ikitelli Organized Industrial Zone

Argus Makine Ekipmanları San. ve Tic. Ltd. Şti.

Process Equipment Supply

Sundyne API 617 process gas compressors, M+M steam turbines and Sunflo HMP units are supplied with the pump groups. Equipment is selected for chemical, energy and oil-gas process lines. Heavy-duty skid and baseplate units are seen in installation photos. Import and distribution are run from Ikitelli.

İstanbul · Ikitelli Organized Industrial Zone

Argus Makine Ekipmanları San. ve Tic. Ltd. Şti.

Pump Technical Support

Argus provides selection, spare parts and field support for the Allweiler, Sundyne, Marelli, IMO and Greenpumps pumps it represents. Application consulting is given on hot-oil, API 610 and magnetic-drive groups. Ikitelli Eskoop A2 Block No:108 is the contact point. Different solution paths and new ideas are stated on the site.

İstanbul · Ikitelli Organized Industrial Zone

Yalçın Boru Jeotermal

Pre-Insulated Valve Manufacturing

Isolation valves, air vents, drain valves and combinations are manufactured pre-insulated on request. This shortens field installation on geothermal and district-heating networks. The Pre-Insulated Valve Manufacturing service is supplied in this scope from the plant. The 23,000 m² Polatlı OSB plant follows EN 253, EN 448, EN 15632 and EN 12201-2; production started in İvedik in 1997 and has been in Polatlı since 2000.

Ankara · Polatli Organized Industrial Zone

Dikkan Gemi Endüstriyel Vana

Ball Valve Manufacturing

Mani̇sa · Manisa Organized Industrial Zone