Plastics &amp; Rubber

Couplings are produced from polypropylene (PP) and polyacetal (POM) to TS ISO 17885. The size range is Ø20 mm – Ø110 mm at PN 16. They tolerate pipe diameter variation of ±1 mm; the O-ring is EPDM. Blue and black series include couplings, tees, elbows, male adapters and saddles from 20 mm to 110 mm.

Ankara · OSTIM Organized Industrial Zone

Senkron Plastik

Drip Irrigation Accessories and Drippers

Drip accessories include reducing nipples in 16x20, 25x16 and 25x20 mm, adjustable drippers (red/green/wide discharge), pipe hangers, holding stakes and outlet mini valves. Parts are used with 16/20 mm drip lines and 5–7 mm spaghetti micro-tube in greenhouse and garden irrigation.

Ankara · OSTIM Organized Industrial Zone

Pipelife Türkiye

Clamped and Latch Sprinkler Pipes

ARILI/PIPELIFE clamped sprinkler systems are produced in Ø75, 90, 110, 125, 140 and 160 mm. The latch system covers Ø50 mm to Ø200 mm. Pipes are made from high-density polyethylene in 5 and 6 m lengths, PN 4, 6, 8 and 10, in PE 100. They are assembled and removed in field sprinkler irrigation with leak-tight joints even at low pressure.

Ni̇ğde · Nigde Organized Industrial Zone

Pipelife Türkiye

PE Agricultural Irrigation Pipes

Polyethylene irrigation pipes are used as main, sub-main and lateral lines. They are produced from black compound with well-dispersed UV stabilizer for sunlight resistance in farm, garden and field use. Because they can be made in the required diameter, long runs are laid with fewer fittings. Flexibility and strength are used both to carry water to the plot and to distribute it in the field.

Ni̇ğde · Nigde Organized Industrial Zone

Pipelife Türkiye

Flat Drip Irrigation Pipes

Pipelife flat drip irrigation pipes are produced in 17, 22 and 25 mm diameters. Emitter spacings are 10, 15, 20, 25, 30, 33, 40, 50, 60, 75 and 100 cm. Flows are 0.8, 1.0, 1.6, 2.2, 2.6 and 3.2 l/h. Wall thickness from 0.5 mil to 36 mil covers single-season and multi-year use. The range includes thin, medium and heavy-wall lines with midi, flat micro and flat PC emitters.

Ni̇ğde · Nigde Organized Industrial Zone

Ardent Plastik

HDPE PE100 pipes

The HDPE page specifies PE100 to EN 12201-2, TS 418-2 and ISO 4427; σ = 680 MPa, MRS = 10.0 MPa. Black, UV-stabilised; butt fusion or electrofusion. DIN 6–32 bar; wall/weight table 16–400 mm. Uses include potable water, irrigation mains and sewer.

Mersi̇n

Ardent Plastik

Sprinkler irrigation pipes

The sprinkler product page restates the former site: pipes from 50 mm to 200 mm, lengths 5.0 / 5.6 / 6.0 m, various working pressures. The solutions page describes rain-like distribution via sprinkler heads. No PN table is published on the current page.

Mersi̇n

Ardent Plastik

Drip irrigation pipes (Drip-X family)

The drip page lists round pipe 16 mm at 2/4/8 LPH and 20 mm at 2/4 LPH, working pressure 1.0 bar. Plain wall 16 mm 0.90–1.20 mm and 20 mm 1.00–1.20 mm. PC Q16 2/4 l. Thin-wall HDPE tape 17 and 22 mm, 8–36 mil, emitters 20–100 cm, 0.80 bar, 1–5 seasons. About calls Drip-X / Drip-X PC thick-wall oval pipe with flat emitters.

Mersi̇n

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

Radial Seals

Radial seals are dynamic seals used to prevent fluid escape where there is relative motion between two parts, such as rotating shafts. They accommodate oils, greases and hydraulic fluids. Materials listed include nitrile, fluorocarbon and silicone. Chemical and temperature resistance are among the features on the radial-seals page.

Bursa

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

V-Rings

V-rings are rotary seals used to seal rotating shafts against dirt, dust, water and leaking grease. Advantages listed include versatile applications, low-friction operation and high circumferential speeds. Models: VR–A10, the common standard with a straight sealing back; VR–S10 with a conically extended retaining part for a more secure seat on the shaft; VR–L10, a small-section type. A range of types, materials and dimensions is offered.

Bursa

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

Garlock Seals

Garlock is described as a brand of industrial sealing solutions in various sizes and designs. A highlighted material is Garlock Gylon, a high-performance PTFE with chemical and temperature resistance. Features listed: resistance to high pressure and vacuum, and temperature resistance from -90°C to +260°C. The page positions Gylon seals for sealing performance in challenging environments.

Bursa

Services in This Category

Approved supplier service catalogs in this category.

Service type: 14 services

Senkron Plastik

Irrigation Fittings Export

Senkron expanded exports that began with Iraq in 2002 to more than 70 countries. Couplings, drip accessories and spaghetti pipe are shipped under SENKRON, SUPRA, GREENAQUA, ARHAN and TURAB to agricultural and garden irrigation distributors. Activity is run together with fair participation and product registration by market.

Ankara · OSTIM Organized Industrial Zone

Senkron Plastik

PE Pipe Coupling and Fitting Manufacturing

At the Ostim MegaCenter plant, PP compression couplings, adapters and fittings for PE pipes are injection-moulded. Scope is TS ISO 17885, Ø20–110 mm and PN 16. Blue and black series covering more than 1,200 types are produced for agricultural, garden, landscape and pool systems.

Ankara · OSTIM Organized Industrial Zone

Senkron Plastik

Drip Irrigation Accessory Manufacturing

Drip-pipe fittings and drippers have been in the range since 2008. Reducing nipples, adjustable drippers, mini valves and holding parts are moulded to work with 16/20 mm lines and 5–7 mm spaghetti. They are produced for online dripper installation in greenhouse and pot irrigation.

Ankara · OSTIM Organized Industrial Zone

Pipelife Türkiye

ArılıLab Quality Control and Pipe Testing

ArılıLab is quality control integrated from raw-material verification to final inspection. Systematic testing supports traceability and alignment with potable water, wastewater, gas and agriculture standards. Drip, sprinkler and PE irrigation pipes on the Niğde line are produced under this laboratory discipline.

Ni̇ğde · Nigde Organized Industrial Zone

Pipelife Türkiye

Sprinkler Irrigation System Manufacturing

Clamped and latch sprinkler pipes are produced in PE 100, 5–6 m lengths, Ø50–200 mm and PN 4–10. The Turkish Patent Institute-approved clamped line is Ø75–160 mm. The system is supplied with latch or clamp joints for rapid field assembly and removal on field crops.

Ni̇ğde · Nigde Organized Industrial Zone

Pipelife Türkiye

Drip Irrigation Pipe Manufacturing

The Niğde OIZ plant extrudes flat drip lines with midi and micro emitters in thin/medium wall and heavy-wall lines with flat PC emitters. Subsurface PC flat drip is produced in 16 and 20 mm, 24 and 36 mil wall, 1.6, 2.1 and 3.4 l/h with anti-siphon emitters. Diameter, spacing and wall are selected for row-crop and orchard projects.

Ni̇ğde · Nigde Organized Industrial Zone

Ardent Plastik

Turnkey irrigation projects

The turnkey page combines site survey, hydraulic calculation, product selection, line/filtration/valve layout, installation support, commissioning and maintenance advice. The import-export page also offers agronomic support, fertigation and greenhouse/hydroponic filtration advice.

Mersi̇n

Ardent Plastik

Sprinkler and HDPE mainline manufacturing

Product pages define sprinkler pipe 50–200 mm / 5.0–6.0 m and PE100 16–400 mm to EN 12201-2. Lines in Mersin serve irrigation mains and sprinkler laterals. The quality page lists TS EN ISO 9261 and TS EN 12201-2+A1.

Mersi̇n

Ardent Plastik

Drip and Drip-X pipe manufacturing

About states agricultural irrigation pipe production since 1995 and presents Drip-X / Drip-X PC as manufacturer-made oval flat-emitter pipe. Round, plain, PC and thin-wall drip lines are extruded in Mersin and Niğde. The catalogue ties the same lines to the Bor OSB and Mersin plants.

Mersi̇n

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

O-Ring Express Service