Industrial category
Molded Plastics
Turkish manufacturers and suppliers in Molded Plastics.
Popular products
Çetindağ Endüstriyel
Kamasan STK49 Plastic Crate
Molded Plastics ProductKamasan STK49 plastic crate is molded from 100% first-grade HDPE with UV additive. Outer size 400×600×240 mm, inner 370×570×230 mm, weight about 1820 g. Perforated base and sides with open handles; stock colors dark blue RAL5002 and orange RAL2003; accessories include TKN6400 lid and SP5535A separator.
İstanbul · Ikitelli Organized Industrial Zone
Sterplas Polyester Plastik Sanayi ve Ticaret Ltd. Şti.
GRP Pool Sand Filter
Molded Plastics ProductSand filters with a glass-reinforced polyester (GRP/FRP) body for residential, villa, hotel, complex, aquapark and commercial swimming pools. The body resists high pressure, UV rays, pool chemicals and corrosion; the rusting seen in metal filters does not occur. Offers 4 bar test pressure, high filtration efficiency and low operating cost; custom logo, colour and OEM production for other brands.
İstanbul
Sterplas Polyester Plastik Sanayi ve Ticaret Ltd. Şti.
Composite Machine Enclosure
Molded Plastics ProductGRP composite enclosures that protect machinery and equipment against impact, dust, moisture, rain, UV rays and corrosive outdoor conditions. Lighter than steel, aluminium and plastic alternatives, rust-free and maintenance-free, with electrical insulation and chemical resistance. Each project is custom designed in different thicknesses and strength values according to application, environment and technical requirements.
İstanbul
Kompozit Kimya A.Ş.
Composite Manhole Covers
Molded Plastics ProductNFG-branded manhole covers produced with SMC/BMC technique from glass-fibre reinforced unsaturated polyester (GRP) composite compound. Available as Ø600 mm round, hinged and square-framed types, as well as 350x350, 453x453, 600x600, 680x680, 800x800 and 600x800 mm sizes. Produced in D400, C250, B125 and A15 load classes under TS 1478 EN 124; they have a locking mechanism and carry no theft risk because they have no scrap value.
Kocaeli
Popular services
Narplas Plastik Metal Sanayi ve Tic. A.Ş.
Assembly and Mold Maintenance Services
Molded Plastics ServiceAlongside injection production, automated and manual assembly plus mold maintenance and revision services are offered. The LinkedIn profile lists Assembly (Automated / Manual Processes) and Mold Services including Modification / Maintenance. With about 300 production staff and four Tuzla sites, assembly and mold maintenance are planned to customer needs, aiming for first-time-right processes and continuous improvement under the quality policy.
İstanbul · Istanbul Anadolu Yakasi Organized Industrial Zone
Sterplas Polyester Plastik Sanayi ve Ticaret Ltd. Şti.
RTM Part Production
Molded Plastics ServiceLightweight, durable composite part production with RTM (Resin Transfer Molding) technology for the automotive, defence, industrial equipment and energy sectors. Delivers Class A surfaces on both sides, stable thickness and repeatable quality suited to serial production. Glass fibre, carbon fibre and hybrid reinforcement; epoxy, vinyl ester and polyester resin systems, resin flow simulation, vacuum-assisted RTM and metal insert integration are applied.
İstanbul
Sterplas Polyester Plastik Sanayi ve Ticaret Ltd. Şti.
Contract and OEM Composite Manufacturing
Molded Plastics ServiceContract composite manufacturing and OEM composite part production for various sectors using GRP, FRP and fiberglass technologies. Composite part production, mold production, prototype, pilot and serial production are managed under one roof according to the product owner's technical requirements. Flexible low- and high-volume production, project-specific engineering support and an export-ready production infrastructure are offered.
İstanbul
Kompozit Kimya A.Ş.
Customer-Specific Composite Production
Molded Plastics ServiceAlongside its standard infrastructure products, Kompozit Kimya serves domestic and international markets with customer-specific production. Production takes place with SMC and BMC techniques at the İzmit plant with a 40,000 m² open and 9,000 m² closed area and a capacity of 20,000 tons/year. Products can be made in the desired colour and to the required tensile, bending and impact strength values.
Kocaeli
Esa Kompozit A.Ş.
Custom Composite Part Manufacturing
Molded Plastics ServiceManufacturing of composite parts and sheets to customer requirements by press molding, RTM, SMC, vacuum injection and filament winding, or combinations of these. Glass, carbon and aramid fibers are used with epoxy, vinylester and polyester resins. Laminated sheets, SMC, carbon, insulating and ballistic parts are produced for electrical, defense, marine and automotive sectors.
Kocaeli · Dilovasi Organized Industrial Zone
Kent Kompozit
Composite Moulding (Pressing)
Molded Plastics ServiceThe prepared SMC/BMC composite compound is moulded in hydraulic presses under high pressure and temperature, where the product reaches its final strength. Hydraulic press lines allow high-volume series production across a wide range, and project-specific moulds and production are offered for non-standard sizes and features. Pressed parts are deflashed and fitted with gaskets, locks and hinges.
İstanbul
Top industrial zones
Products in This Category
Approved supplier product catalogs in this category.
Çetindağ Endüstriyel
Kamasan STK49 Plastic Crate
Molded Plastics ProductKamasan STK49 plastic crate is molded from 100% first-grade HDPE with UV additive. Outer size 400×600×240 mm, inner 370×570×230 mm, weight about 1820 g. Perforated base and sides with open handles; stock colors dark blue RAL5002 and orange RAL2003; accessories include TKN6400 lid and SP5535A separator.
İstanbul · Ikitelli Organized Industrial Zone
Sterplas Polyester Plastik Sanayi ve Ticaret Ltd. Şti.
GRP Pool Sand Filter
Molded Plastics ProductSand filters with a glass-reinforced polyester (GRP/FRP) body for residential, villa, hotel, complex, aquapark and commercial swimming pools. The body resists high pressure, UV rays, pool chemicals and corrosion; the rusting seen in metal filters does not occur. Offers 4 bar test pressure, high filtration efficiency and low operating cost; custom logo, colour and OEM production for other brands.
İstanbul
Sterplas Polyester Plastik Sanayi ve Ticaret Ltd. Şti.
Composite Machine Enclosure
Molded Plastics ProductGRP composite enclosures that protect machinery and equipment against impact, dust, moisture, rain, UV rays and corrosive outdoor conditions. Lighter than steel, aluminium and plastic alternatives, rust-free and maintenance-free, with electrical insulation and chemical resistance. Each project is custom designed in different thicknesses and strength values according to application, environment and technical requirements.
İstanbul
Kompozit Kimya A.Ş.
Composite Manhole Covers
Molded Plastics ProductNFG-branded manhole covers produced with SMC/BMC technique from glass-fibre reinforced unsaturated polyester (GRP) composite compound. Available as Ø600 mm round, hinged and square-framed types, as well as 350x350, 453x453, 600x600, 680x680, 800x800 and 600x800 mm sizes. Produced in D400, C250, B125 and A15 load classes under TS 1478 EN 124; they have a locking mechanism and carry no theft risk because they have no scrap value.
Kocaeli
Kompozit Kimya A.Ş.
Composite Rainwater Gratings
Molded Plastics ProductRainwater gratings produced from SMC/BMC composite, offered in sizes such as 270x500x40, 300x500x50, 400x450x60, 400x600x60, 500x500x60, 550x550x60, 600x600x60 and 200x1000x40 mm, with framed and hinged options. Produced to TS 1478 EN 124 in D400 (40 tonnes) and C250 (25 tonnes) classes for carriageways and kerb sides. Tree grate, pavement-type and channel grating series are also available.
Kocaeli
Kompozit Kimya A.Ş.
Composite Connection Boxes
Molded Plastics ProductComposite connection boxes (joint chambers) for telecommunication and energy infrastructure. Type 12 485x485x415 mm and deep-body 485x485x650 mm models are produced in D400, C250, B125 and A15 load classes; round Type 13 Ø500x450 mm, Type 14 Ø300x410 mm and Type 15 Ø200x310 mm models in B125/A15 classes. They are among the infrastructure products approved by Superonline, Türksat, Vodafone and Türk Telekom.
Kocaeli
Gefa Teknik Makina San. ve Tic. Ltd. Şti.
GRP (FRP) Composite Grating
Molded Plastics ProductComposite gratings produced in one piece by winding continuous glass fibre rovings into the mould in layers and systematically pouring special polyester resins between them. The continuous glass fibres make the grating strong in both directions; it is unaffected by chemicals, salt water and waste water. Used for non-slip floors, walkways, fences and enclosures in industrial, agricultural, chemical and water treatment facilities.
İzmir
Doğuş Composite
Bus Rear Mask
Molded Plastics ProductManufactured with RTM technology to advanced engineering standards, this bus rear mask is designed to deliver maximum durability and flawless surface quality for commercial vehicles. With modern, aerodynamic lines, the body part provides a practical and aesthetic solution with ready recesses for rear window and brand logo mounting.
Mersin · Mersin/Tarsus Organized Industrial Zone
Doğuş Composite
Bus Front Bumper Group
Molded Plastics ProductDesigned to meet the aesthetic and aerodynamic needs of modern commercial vehicles, this multi-piece front bumper group is produced with advanced composite manufacturing processes. Together with the modular front centre bumper made by RTM in closed moulds, it offers efficiency and a perfect fit both on OEM production lines and in aftermarket service.
Mersin · Mersin/Tarsus Organized Industrial Zone
Doğuş Composite
Bus Wheel House Module
Molded Plastics ProductCombining space optimisation and structural safety in bus interiors, this special module is produced with the high-strength hand lay-up technique. Positioned precisely over the vehicle's fuel tank and wheel arch, it provides a safe enclosure for critical components and acts as a rigid carrier platform for the passenger seats mounted on top.
Mersin · Mersin/Tarsus Organized Industrial Zone
Polütek Polyester Poliüretan Ltd. Şti.
Construction Machine Cab and Exterior Parts
Molded Plastics ProductAll interior and exterior GRP and polyurethane parts of construction machine cabs are produced. Besides exterior and cab parts, fenders, roofs, engine hoods, floor mats, seats, instrument panels and dashboards are manufactured; all parts are finished with topcoat paint, finish gelcoat or as requested by the customer.
İstanbul
Polütek Polyester Poliüretan Ltd. Şti.
Agricultural Machine GRP Parts
Molded Plastics ProductInterior and exterior GRP parts for agricultural machine cabs are produced. Besides exterior and cab parts, floor mats, seats, instrument panels and dashboards are manufactured. Parts are finished with topcoat paint, finish gelcoat or to customer request; RTM and SMC techniques are used in production.
İstanbul
Services in This Category
Approved supplier service catalogs in this category.
Narplas Plastik Metal Sanayi ve Tic. A.Ş.
Assembly and Mold Maintenance Services
Molded Plastics ServiceAlongside injection production, automated and manual assembly plus mold maintenance and revision services are offered. The LinkedIn profile lists Assembly (Automated / Manual Processes) and Mold Services including Modification / Maintenance. With about 300 production staff and four Tuzla sites, assembly and mold maintenance are planned to customer needs, aiming for first-time-right processes and continuous improvement under the quality policy.
İstanbul · Istanbul Anadolu Yakasi Organized Industrial Zone
Sterplas Polyester Plastik Sanayi ve Ticaret Ltd. Şti.
RTM Part Production
Molded Plastics ServiceLightweight, durable composite part production with RTM (Resin Transfer Molding) technology for the automotive, defence, industrial equipment and energy sectors. Delivers Class A surfaces on both sides, stable thickness and repeatable quality suited to serial production. Glass fibre, carbon fibre and hybrid reinforcement; epoxy, vinyl ester and polyester resin systems, resin flow simulation, vacuum-assisted RTM and metal insert integration are applied.
İstanbul
Sterplas Polyester Plastik Sanayi ve Ticaret Ltd. Şti.
Contract and OEM Composite Manufacturing
Molded Plastics ServiceContract composite manufacturing and OEM composite part production for various sectors using GRP, FRP and fiberglass technologies. Composite part production, mold production, prototype, pilot and serial production are managed under one roof according to the product owner's technical requirements. Flexible low- and high-volume production, project-specific engineering support and an export-ready production infrastructure are offered.
İstanbul
Kompozit Kimya A.Ş.
Customer-Specific Composite Production
Molded Plastics ServiceAlongside its standard infrastructure products, Kompozit Kimya serves domestic and international markets with customer-specific production. Production takes place with SMC and BMC techniques at the İzmit plant with a 40,000 m² open and 9,000 m² closed area and a capacity of 20,000 tons/year. Products can be made in the desired colour and to the required tensile, bending and impact strength values.
Kocaeli
Esa Kompozit A.Ş.
Custom Composite Part Manufacturing
Molded Plastics ServiceManufacturing of composite parts and sheets to customer requirements by press molding, RTM, SMC, vacuum injection and filament winding, or combinations of these. Glass, carbon and aramid fibers are used with epoxy, vinylester and polyester resins. Laminated sheets, SMC, carbon, insulating and ballistic parts are produced for electrical, defense, marine and automotive sectors.
Kocaeli · Dilovasi Organized Industrial Zone
Kent Kompozit
Composite Moulding (Pressing)
Molded Plastics ServiceThe prepared SMC/BMC composite compound is moulded in hydraulic presses under high pressure and temperature, where the product reaches its final strength. Hydraulic press lines allow high-volume series production across a wide range, and project-specific moulds and production are offered for non-standard sizes and features. Pressed parts are deflashed and fitted with gaskets, locks and hinges.
İstanbul
Kent Kompozit
Composite Compound Preparation
Molded Plastics ServiceGlass fibre, polyester resin, fillers and additives are turned into SMC/BMC compound according to a defined recipe. Compound preparation is carried out in-house under controlled, standard-compliant conditions, ensuring consistent material quality and strength meeting TS EN 124-5 load classes for manhole covers, access covers, composite joint chambers and drainage products.
İstanbul
Kent Kompozit
Engineering, Design and Pattern Shop
Molded Plastics ServiceProduct geometry, load class and mould design are prepared with computer-aided engineering (CAD/CAE) and strength calculations are performed. Precision patterns and moulds are produced in the in-house pattern shop for approved designs, giving speed, flexibility and quality control. Technical staff support customers from project survey to product selection and installation advice.
İstanbul
Tezkom Kompozit Teknolojileri Sanayi ve Ticaret A.Ş.
SMC / BMC Composite Part Moulding
Molded Plastics ServiceUsing SMC (sheet moulding compound, 25-65% glass fibre) and BMC (bulk moulding compound, 10-30% fibre) materials containing thermoset resin, glass fibre and fillers, light and durable project-specific parts are produced by compression and injection moulding. SMC is used in automotive, energy, white goods and infrastructure applications requiring high surface quality; BMC is used for complex-geometry, electrically insulating and fire-resistant electrical-electronic and lighting parts.
Eskişehir · Eskisehir Organized Industrial Zone
Gefa Teknik Makina San. ve Tic. Ltd. Şti.
GRP Composite OEM Part Manufacturing
Molded Plastics ServiceStrong, lightweight and durable parts are produced as alternatives to original equipment using polyester, glass fibre, BMC and SMC compounds. BMC and SMC compounds or specially produced GRP composite plates and billets are machined on vertical machining centres and lathes. Composite flanges, automotive spare parts, plates, tables and blocks for the machinery industry, special composite bolts and nuts, and polyester pipes, ducts and tanks can be made.
İzmir
Doğuş Composite
LRTM / RTM Composite Production
Molded Plastics ServiceA method in which composite parts are produced in a closed-mould system. Glass fibre and other reinforcements are placed in the mould and resin is transferred into it with vacuum assistance. LRTM offers low resin consumption, minimal emissions and parts with two smooth faces, and is preferred for projects requiring aesthetics and tight tolerances.
Mersin · Mersin/Tarsus Organized Industrial Zone
Doğuş Composite
SMC Moulding
Molded Plastics ServiceAn advanced moulding method in which a pre-prepared compound of glass fibre, resin, fillers and additives is heated and moulded under a press. It yields high-strength, durable parts with aesthetic surface quality, offering fast and low-cost production for large, tight-tolerance parts in the automotive, white goods and electrical-electronics sectors.
Mersin · Mersin/Tarsus Organized Industrial Zone
Suppliers in This Category
91 suppliers
For buyers
Get quotes from Molded Plastics suppliers
Browse company profiles below or describe your need to collect multiple quotes in Molded Plastics quickly.
-
Company profiles and certifications
-
Multiple quotes from one RFQ
-
Filter by capability and location
Browse Related Categories
Discover suppliers in adjacent industrial sectors.
Injection Molding
Specialist companies in Injection Molding.
EPDM Seals
Specialist companies in EPDM Seals.
Custom Injection Molding
Turkish manufacturers and suppliers in Custom Injection Molding.
Plastic Extrusion
Specialist companies in Plastic Extrusion.
Molded Rubber Goods
Turkish manufacturers and suppliers in Molded Rubber Goods.
Rubber Molding
Turkish manufacturers and suppliers in Rubber Molding.
Plastic Components
Turkish manufacturers and suppliers in Plastic Components.
O-Rings
Turkish manufacturers and suppliers in O-Rings.
Featured Supplier Profiles
Capability, certification, and export profiles with enough suppliers in this category.
ISO 9001 certified Molded Plastics suppliers
69 listed suppliers
ProcessSerial Production — Molded Plastics manufacturers
68 listed suppliers
ProcessHigh-Volume Production — Molded Plastics manufacturers
58 listed suppliers
Technical standardEN — Molded Plastics manufacturers
55 listed suppliers
MaterialPP (Polypropylene) — Molded Plastics manufacturers
54 listed suppliers
CapabilityLarge Part Molding — Molded Plastics manufacturers
40 listed suppliers
ProcessMold Development — Molded Plastics manufacturers
38 listed suppliers
IndustryAutomotive — Molded Plastics suppliers
35 listed suppliers
IndustryConstruction — Molded Plastics suppliers
32 listed suppliers
MaterialABS — Molded Plastics manufacturers
31 listed suppliers
MaterialPE (Polyethylene) — Molded Plastics manufacturers
29 listed suppliers
ExportMolded Plastics suppliers exporting to Germany
26 listed suppliers
Featured Product Catalogs
Standard product types with enough suppliers in this category.
Featured Service Catalogs
Standard service types in this category that meet the supplier threshold.
Find the right supplier or list your company
Send RFQs as a buyer or publish your company profile in this category.