The HDPE page specifies PE100 to EN 12201-2, TS 418-2 and ISO 4427; σ = 680 MPa, MRS = 10.0 MPa. Black, UV-stabilised; butt fusion or electrofusion. DIN 6–32 bar; wall/weight table 16–400 mm. Uses include potable water, irrigation mains and sewer.

Mersi̇n

Ardent Plastik

Sprinkler irrigation pipes

Irrigation Pipe & Hose Product

The sprinkler product page restates the former site: pipes from 50 mm to 200 mm, lengths 5.0 / 5.6 / 6.0 m, various working pressures. The solutions page describes rain-like distribution via sprinkler heads. No PN table is published on the current page.

Mersi̇n

Ardent Plastik

Drip irrigation pipes (Drip-X family)

Irrigation Pipe & Hose Product

The drip page lists round pipe 16 mm at 2/4/8 LPH and 20 mm at 2/4 LPH, working pressure 1.0 bar. Plain wall 16 mm 0.90–1.20 mm and 20 mm 1.00–1.20 mm. PC Q16 2/4 l. Thin-wall HDPE tape 17 and 22 mm, 8–36 mil, emitters 20–100 cm, 0.80 bar, 1–5 seasons. About calls Drip-X / Drip-X PC thick-wall oval pipe with flat emitters.

Mersi̇n

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

Radial Seals

General Seals

Radial seals are dynamic seals used to prevent fluid escape where there is relative motion between two parts, such as rotating shafts. They accommodate oils, greases and hydraulic fluids. Materials listed include nitrile, fluorocarbon and silicone. Chemical and temperature resistance are among the features on the radial-seals page.

Bursa

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

V-Rings

General Seals

V-rings are rotary seals used to seal rotating shafts against dirt, dust, water and leaking grease. Advantages listed include versatile applications, low-friction operation and high circumferential speeds. Models: VR–A10, the common standard with a straight sealing back; VR–S10 with a conically extended retaining part for a more secure seat on the shaft; VR–L10, a small-section type. A range of types, materials and dimensions is offered.

Bursa

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

Garlock Seals

General Seals

Garlock is described as a brand of industrial sealing solutions in various sizes and designs. A highlighted material is Garlock Gylon, a high-performance PTFE with chemical and temperature resistance. Features listed: resistance to high pressure and vacuum, and temperature resistance from -90°C to +260°C. The page positions Gylon seals for sealing performance in challenging environments.

Bursa

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

Freudenberg Simrit Oil Seals

General Seals

Freudenberg Simrit is presented as a supplier of sealing solutions; a highlighted product is the Simrit oil seal. Seals are made from materials such as nitrile, fluoroelastomer and silicone for chemical and temperature resistance. Oil-seal types and sizes are listed in inch or metric on the product page. The page describes exceptional sealing performance in harsh environments.

Bursa

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

Dichtomatik Oil Seals

General Seals

Techseals states it supplies every brand of oil seal in inch or metric, high or low pressure, and will locate stock or propose a 100% alternative if not on hand. Type codes listed include CFW, NAK, NOK, Stefa BA–SL–ASL and families such as WA, WAS, WB, AS, TC and TB. Materials: NBR, EPDM, Viton FKM/FPM, silicone and PTFE/Teflon. Applications include pumps, hydraulics, air and electric motors, windmills, white goods, drives, agricultural and construction machinery.

Bursa

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

Hydraulic and Pneumatic Sealing Elements

General Seals

Hydraulic seals are used in systems that generate power with liquid or oil; they are designed for high pressures and temperatures and are commonly made of rubber, polyurethane or plastic. Pneumatic seals are used with compressed air or gas at lower pressures and temperatures, commonly rubber, silicone or PTFE. Sealing elements include gaskets, o-rings and seals in various shapes and materials. Gaskets provide a static seal; o-rings seal between moving parts in hydraulic and pneumatic systems as well as motors and pumps.

Bursa

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

Mechanical Seals

General Seals

A mechanical seal prevents leakage of water, oil or chemicals between rotating or stationary parts in pumps, compressors, mixers and similar equipment. It generally has a stationary part on the housing, a rotating part on the shaft, and a flexible sealing element between them. Cartridge mechanical seals house the components in a self-contained unit to simplify installation. Pusher seals use a spring to keep faces in contact; non-pusher seals use the pressure of the sealed fluid. Techseals states it supplies all kinds of mechanical seals.

Bursa

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

Rotary Seals

General Seals

A rotary shaft seal (also called a lip seal) prevents leakage of oil or grease from rotating parts; it is typically rubber, metal or other materials fitted tightly around a shaft. Applications listed include automotive engines, gearboxes, pumps, compressors and other machinery, designed for high speeds and temperatures. Techseals states it can deliver 55,000 different sizes/types from stock. Oil-seal types are shown on the rotary-seals page.

Bursa

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

Cord Ring

If the correct o-ring size is not in stock, an o-ring can be made from round cord: cut to length and glue the ends with instant adhesive (Loctite 406 is named as suitable). Alternatively, o-rings from cord can be vulcanized at both ends in production. Round cord is supplied on a roll or cut to the required length. The cord-ring page describes making rings from cord, distinct from selling cord stock alone.

Bursa

Services in This Category

Approved supplier service catalogs in this category.

Service type: 27 services

Ardent Plastik

Turnkey irrigation projects

Irrigation Pipe & Hose Service

The turnkey page combines site survey, hydraulic calculation, product selection, line/filtration/valve layout, installation support, commissioning and maintenance advice. The import-export page also offers agronomic support, fertigation and greenhouse/hydroponic filtration advice.

Mersi̇n

Ardent Plastik

Sprinkler and HDPE mainline manufacturing

Irrigation Pipe & Hose Service

Product pages define sprinkler pipe 50–200 mm / 5.0–6.0 m and PE100 16–400 mm to EN 12201-2. Lines in Mersin serve irrigation mains and sprinkler laterals. The quality page lists TS EN ISO 9261 and TS EN 12201-2+A1.

Mersi̇n

Ardent Plastik

Drip and Drip-X pipe manufacturing

Irrigation Pipe & Hose Service

About states agricultural irrigation pipe production since 1995 and presents Drip-X / Drip-X PC as manufacturer-made oval flat-emitter pipe. Round, plain, PC and thin-wall drip lines are extruded in Mersin and Niğde. The catalogue ties the same lines to the Bor OSB and Mersin plants.

Mersi̇n

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

O-Ring Express Service

General Seals

O-Ring Express Service covers all sizes, with a four-week cycle stated for large quantities. The page lists 100,000+ stocks and fast delivery from inventory. Internal diameters start from 1 mm and cross-sections from 0.6 mm; all o-ring sizes up to 600 mm ID metric/inch, with emergency replacements and custom prototypes. Standard compounds: NBR, EPDM, FKM (Viton), VMQ; coming soon FFKM, HNBR, CR, FVMQ, FEPM, ACM. Shore A 40–90; colours black, green, brown and red depending on compound.

Bursa

Polesie TR

Injection Molding

Molded Plastics Service

Injection molding.

Si̇nop · Sinop Organized Industrial Zone

Polesie TR

OEM Production

Molded Plastics Service

OEM.

Si̇nop · Sinop Organized Industrial Zone

Polesie TR

Plastic Toy Manufacturing

Molded Plastics Service

Toy manufacturing.

Si̇nop · Sinop Organized Industrial Zone

Kaya-pen Plastik

OEM Production

Molded Plastics Service

OEM production.

Si̇nop · Sinop Organized Industrial Zone

Kaya-pen Plastik

PVC Accessory Manufacturing

Molded Plastics Service

PVC accessory manufacturing.

Si̇nop · Sinop Organized Industrial Zone

Kaya-pen Plastik

Custom Molding

Molded Plastics Service

Custom molding.

Si̇nop · Sinop Organized Industrial Zone

Sicim Plastik

Granule Supply

Plastics & Rubber Service

Granule Supply.

Kütahya · Kutahya Organized Industrial Zone

Kros Otomotiv

Custom Rubber Parts

Custom Silicone Extrusion

Custom Rubber Parts.

Kütahya · Kutahya Organized Industrial Zone

Suppliers in This Category

City

Industrial zone

Verified Exporter Exports internationally

18 suppliers

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

We are a leading manufacturer of high – quality O-rings and sealing solutions for all industries.

Bursa

Ardent Plastik

Ardent Plastik has made PE since 1979 and agricultural irrigation pipe since 1995; Drip-X and sprinkler lines are based in Mersin.

Mersi̇n

Aşut Fiberglass Ticaret ve Sanayi A.Ş.

Aşut Fiberglass is an established composite manufacturer of GRP/FRP pipes, tanks and fiberglass boats at Mersin OSB.

Mersi̇n · Mersin Organized Industrial Zone

Doleks Doğal Kauçuk

Doleks manufactures natural rubber yarn and rubber products in Kırklareli OSB.

Kirklareli̇ · Kirklareli Organized Industrial Zone

Erko Plastik Ambalaj Gıda Sanayi Ticaret Ltd. Şti.

Erko Plastik manufactures food-grade PP injection packaging at Erzurum Merkez I Ek OSB, supplying pails, containers and custom-size packs for regional and export markets.

Erzurum · Erzurum Merkez I. Organized Industrial Zone

Erna-maş Makina Ticaret ve Sanayi A.Ş. (şabanözü Fabrikası)

Erna-Maş manufactures small domestic appliances and plastic injection parts at Şabanözü OSB, with 250+ presses and ~2,000 staff across Istanbul and Çankırı plants.

Çankiri · Sabanozu(Cankiri) Organized Industrial Zone

İnter-Plast

İnter-Plast manufactures window/door joinery plastic accessories and injection parts at Edirne OSB Süloğlu.

Edi̇rne · Edirne Organized Industrial Zone

Kaya-pen Plastik

Kaya-Pen manufactures PVC door/window handles and building accessories in Sinop OSB.

Si̇nop · Sinop Organized Industrial Zone

Kros Otomotiv

Kros Otomotiv manufactures rubber hoses, fluid transfer lines and automotive supply parts in Kütahya OSB.

Kütahya · Kutahya Organized Industrial Zone

Pensan

Pensan manufactures ballpoint, gel, highlighter and fibre-tip pens at Çardak OSB and exports to 70+ countries.

Deni̇zli̇ · Denizli Cardak Organized Industrial Zone

Petlas Lastik San. ve Tic. A.Ş.

Petlas is an AKO Group tire manufacturer in Kırşehir producing passenger, commercial, truck, agri and specialty tires.

Kirşehi̇r

Polesie TR

Polesie TR is a Turkish-Belarusian plastic toy plant in Sinop OSB.

Si̇nop · Sinop Organized Industrial Zone

For buyers

Get quotes from Plastics & Rubber suppliers

Browse verified companies below or describe your need to collect multiple quotes in Plastics & Rubber quickly.

Verified profiles and certifications
Multiple quotes from one RFQ
Filter by capability and location

Browse Related Categories

Discover suppliers in adjacent industrial sectors.

View all →

Featured Supplier Profiles

Capability, certification, and export profiles with enough suppliers in this category.

Process

Featured Service Catalogs

Standard service types in this category that meet the supplier threshold.

Service catalog

Find the right supplier or list your company

Send RFQs as a buyer or publish your company profile in this category.

Plastics & Rubber

Subcategories

Injection Molding

EPDM Seals

Custom Injection Molding

Plastic Extrusion

Molded Plastics

Molded Rubber Goods

Rubber Molding

Plastic Components

O-Rings

Gaskets

Seals

Top industrial zones

Products in This Category

HDPE PE100 pipes

Sprinkler irrigation pipes

Drip irrigation pipes (Drip-X family)

Radial Seals

V-Rings

Garlock Seals

Freudenberg Simrit Oil Seals

Dichtomatik Oil Seals

Hydraulic and Pneumatic Sealing Elements

Mechanical Seals

Rotary Seals

Cord Ring

Services in This Category

Turnkey irrigation projects

Sprinkler and HDPE mainline manufacturing

Drip and Drip-X pipe manufacturing

O-Ring Express Service

Injection Molding

OEM Production

Plastic Toy Manufacturing

OEM Production

PVC Accessory Manufacturing

Custom Molding

Granule Supply

Custom Rubber Parts

Suppliers in This Category

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

Ardent Plastik

Aşut Fiberglass Ticaret ve Sanayi A.Ş.

Doleks Doğal Kauçuk

Erko Plastik Ambalaj Gıda Sanayi Ticaret Ltd. Şti.

Erna-maş Makina Ticaret ve Sanayi A.Ş. (şabanözü Fabrikası)

İnter-Plast

Kaya-pen Plastik

Kros Otomotiv

Pensan

Petlas Lastik San. ve Tic. A.Ş.

Polesie TR

Get quotes from Plastics & Rubber suppliers

Browse Related Categories

General

Metal Processing

Adhesives & Sealants

Automation & Electronics

Casting

Chemicals

Sheet Metal

Custom Manufacturing & Fabricating

Featured Supplier Profiles

Serial Production — Plastics & Rubber manufacturers

EN — Plastics & Rubber manufacturers

ISO 9001 certified Plastics & Rubber suppliers

High-Volume Production — Plastics & Rubber manufacturers

PP (Polypropylene) — Plastics & Rubber manufacturers

Plastics & Rubber suppliers exporting to Germany

PE (Polyethylene) — Plastics & Rubber manufacturers

Packaging — Plastics & Rubber suppliers

Automotive — Plastics & Rubber suppliers

Plastic Injection Molding — Injection Molding manufacturers

HDPE — Plastics & Rubber manufacturers

Plastics & Rubber suppliers exporting to France

Featured Product Catalogs

Injection Molded Part — Injection Molding products

Molded Plastics Product — Molded Plastics products

Plastics & Rubber Product — Plastics & Rubber products