Plastics &amp; Rubber

Couplings are produced from polypropylene (PP) and polyacetal (POM) to TS ISO 17885. The size range is Ø20 mm – Ø110 mm at PN 16. They tolerate pipe diameter variation of ±1 mm; the O-ring is EPDM. Blue and black series include couplings, tees, elbows, male adapters and saddles from 20 mm to 110 mm.

Ankara · OSTIM Organized Industrial Zone

Senkron Plastik

Drip Irrigation Accessories and Drippers

Drip accessories include reducing nipples in 16x20, 25x16 and 25x20 mm, adjustable drippers (red/green/wide discharge), pipe hangers, holding stakes and outlet mini valves. Parts are used with 16/20 mm drip lines and 5–7 mm spaghetti micro-tube in greenhouse and garden irrigation.

Ankara · OSTIM Organized Industrial Zone

Sunstream

Hypernova flat integral dripline

Hypernova is a flat integral, non-PC, clog-resistant dripline. Spec PDF: nominal diameters 16 / 22 / 25 mm; wall 6–24 mil (0.15–0.60 mm). Nominal flow at 1 bar is 1.2 / 1.6 / 2.0 / 3.2 lph; filtration 125 micron / 120 mesh; spacing 15–120 cm. Thin wall is for a single season and medium wall for multi-season use, under ISO 9261.

Çanakkale · Canakkale Organized Industrial Zone

Sunstream

Parallax drip tape

Parallax is drip tape with a continuous-flow-path labyrinth for on-surface and subsurface use. Spec PDF: diameters 16 / 22 / 25 mm; wall 6–16 mil (0.15–0.40 mm). Nominal flow is 0.6 / 0.9 / 1.2 / 1.5 lph at 0.7 bar and 0.7 / 1.0 / 1.4 / 1.8 lph at 1 bar. Filtration 125 micron / 120 mesh; emitter spacing 10–60 cm; ISO 9261. The PDF states emitter CV below 3%.

Çanakkale · Canakkale Organized Industrial Zone

Sunstream

Dynomin cylindrical integral dripline

Dynomin is a cylindrical integral, non-pressure-compensating dripline. The Sunstream spec PDF lists four outlets; nominal diameters 16 and 20 mm; wall 32–48 mil (0.80–1.20 mm). Nominal flow at 1 bar is 2.0 / 4.0 lph; filtration 125 micron / 120 mesh; spacing 20–120 cm; ISO 9261. At 16 mm the inner diameter is 13.8 mm and working pressure is 2.5–4.0 bar by wall thickness.

Çanakkale · Canakkale Organized Industrial Zone

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

Radial Seals

Radial seals are dynamic seals used to prevent fluid escape where there is relative motion between two parts, such as rotating shafts. They accommodate oils, greases and hydraulic fluids. Materials listed include nitrile, fluorocarbon and silicone. Chemical and temperature resistance are among the features on the radial-seals page.

Bursa

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

V-Rings

V-rings are rotary seals used to seal rotating shafts against dirt, dust, water and leaking grease. Advantages listed include versatile applications, low-friction operation and high circumferential speeds. Models: VR–A10, the common standard with a straight sealing back; VR–S10 with a conically extended retaining part for a more secure seat on the shaft; VR–L10, a small-section type. A range of types, materials and dimensions is offered.

Bursa

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

Garlock Seals

Garlock is described as a brand of industrial sealing solutions in various sizes and designs. A highlighted material is Garlock Gylon, a high-performance PTFE with chemical and temperature resistance. Features listed: resistance to high pressure and vacuum, and temperature resistance from -90°C to +260°C. The page positions Gylon seals for sealing performance in challenging environments.

Bursa

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

Freudenberg Simrit Oil Seals

Freudenberg Simrit is presented as a supplier of sealing solutions; a highlighted product is the Simrit oil seal. Seals are made from materials such as nitrile, fluoroelastomer and silicone for chemical and temperature resistance. Oil-seal types and sizes are listed in inch or metric on the product page. The page describes exceptional sealing performance in harsh environments.

Bursa

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

Dichtomatik Oil Seals

Techseals states it supplies every brand of oil seal in inch or metric, high or low pressure, and will locate stock or propose a 100% alternative if not on hand. Type codes listed include CFW, NAK, NOK, Stefa BA–SL–ASL and families such as WA, WAS, WB, AS, TC and TB. Materials: NBR, EPDM, Viton FKM/FPM, silicone and PTFE/Teflon. Applications include pumps, hydraulics, air and electric motors, windmills, white goods, drives, agricultural and construction machinery.

Bursa

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

Hydraulic and Pneumatic Sealing Elements

Hydraulic seals are used in systems that generate power with liquid or oil; they are designed for high pressures and temperatures and are commonly made of rubber, polyurethane or plastic. Pneumatic seals are used with compressed air or gas at lower pressures and temperatures, commonly rubber, silicone or PTFE. Sealing elements include gaskets, o-rings and seals in various shapes and materials. Gaskets provide a static seal; o-rings seal between moving parts in hydraulic and pneumatic systems as well as motors and pumps.

Bursa

Services in This Category

Approved supplier service catalogs in this category.

Service type: 7 services

Senkron Plastik

Irrigation Fittings Export

Senkron expanded exports that began with Iraq in 2002 to more than 70 countries. Couplings, drip accessories and spaghetti pipe are shipped under SENKRON, SUPRA, GREENAQUA, ARHAN and TURAB to agricultural and garden irrigation distributors. Activity is run together with fair participation and product registration by market.

Ankara · OSTIM Organized Industrial Zone

Senkron Plastik

PE Pipe Coupling and Fitting Manufacturing

At the Ostim MegaCenter plant, PP compression couplings, adapters and fittings for PE pipes are injection-moulded. Scope is TS ISO 17885, Ø20–110 mm and PN 16. Blue and black series covering more than 1,200 types are produced for agricultural, garden, landscape and pool systems.

Ankara · OSTIM Organized Industrial Zone

Senkron Plastik

Drip Irrigation Accessory Manufacturing

Drip-pipe fittings and drippers have been in the range since 2008. Reducing nipples, adjustable drippers, mini valves and holding parts are moulded to work with 16/20 mm lines and 5–7 mm spaghetti. They are produced for online dripper installation in greenhouse and pot irrigation.

Ankara · OSTIM Organized Industrial Zone

Sunstream

Sprinkler irrigation pipe manufacturing

Company history says sprinkler pipes and fittings production started in 2012. The sprinkler range and pipes.pdf list latch PE 100 pipe Ø50–125 mm, PN 6 bar, lengths 5 / 5.85 / 6 m. It is made at the Çanakkale factory alongside the dripline lines.

Çanakkale · Canakkale Organized Industrial Zone

Sunstream

Drip-tape manufacturing

About history states Sunstream became the first Turkish company to make drip tape (Parallax) in 2014. The product page and spec PDF describe continuous-labyrinth tape in 16 / 22 / 25 mm diameters and 6–16 mil wall. It is extruded at the İSKO Çanakkale OSB plant as part of the dripline range.

Çanakkale · Canakkale Organized Industrial Zone

Sunstream

Integral-dripper dripline manufacturing

Per Sunstream About, cylindrical (Dynomin) and flat (Hypernova) integral driplines are made at the Çanakkale plant. Dynomin/Macronova lines started in 1999; the Çanakkale factory opened in 2008. In 2016 the plant reached 20,000 m² and 17 lines. Production is under ISO 9001 and ISO 9261 for emitters/pipe.

Çanakkale · Canakkale Organized Industrial Zone

Techseals Kauçuk Sanayi ve Ticaret Ltd. Şti.

O-Ring Express Service