Roof Solar Carrier System — Solar Panels Supplier Products

Stark Mounting

Flat-Roof PV Mounting Systems

Roof Solar Carrier System

Rooftop PV installations demand structural precision and controlled load management. Stark flat-roof systems are engineered to minimize penetration, protect roof membranes, and optimize ballast distribution under high wind and snow conditions. Each system is custom-designed according to roof type, load capacity and local climate, with a corrosion warranty of up to 25 years, using aluminium and coated-steel components for waterproofing-focused commercial roofs.

İzmi̇r

Fixus

Sandwich Panel Roof System (FIX-SP)

Roof Solar Carrier System

FIX-SP is a mounting structure made for sandwich-panel roofs. Rails are 6063 T6 aluminium; fasteners are Ss 304 stainless or hot-dip galvanized steel. Install location: sandwich panel; tilt 10°-60°; roof height max. 20m; wind < 60m/s; snow

Ankara · Ankara Dokumculer Ihtisas Organized Industrial Zone

Fixus

Solar-Ready Capped Sandwich Panel System

Roof Solar Carrier System

On solar-capped sandwich-panel roofs the module is fixed on the cap form. Cap height, width, sheet thickness and insulation density differ by panel brand, so a matching clamp is required. The Fixus cap-compatible system uses a seating face matched to the cap, a wide contact area, high pull-out connection, EPDM sealing and corrosion-resistant materials. Tilt 10°-60°, roof height max. 20m, wind < 60m/s, snow

Ankara · Ankara Dokumculer Ihtisas Organized Industrial Zone

Solarela

Roof Systems

Roof Solar Carrier System

Roof systems for trapezoidal and sandwich roofs are fastened with standard roof screws. Rails and clamps are aluminium EN AW 6063-T6; fasteners stainless A2-70; brackets stainless 304 and aluminium EN AW 6063-T6; sealing is EPDM. Module orientation is landscape or portrait. On-roof aluminium supply is 1,500 tons per month, processing EN-AW-6060, EN-AW-6063 and EN-AW-6082 with T5 and T6 heat treatment, for roof integration, waterproofing, aerodynamic design and quick installation.

Bursa

Mecha Works

Trapezoidal Roof Mounting Systems

Roof Solar Carrier System

High-strength aluminium and steel structures for rooftop solar plants combine light weight and rigidity. Double Rail is a dual-carrier system for solar applications that need high load capacity; two parallel rails spread the load. The profile is EN AW 6063 aluminium, 150–7000 mm long, for vertical or horizontal layout. A rubber gasket is assembled to an AISI 304 stainless-steel bracket, the bracket is fixed to the trapezoidal roof with a sealed screw, and the clamp set is mounted to the rail with an M8 bolt.

Bursa

Mecha Works

Sandwich Roof Mounting Systems

Roof Solar Carrier System

The Rail Mini model is a compact, light mounting solution for sandwich-panel roofs with fast installation. The rail is EN AW 6063 aluminium, 150–7000 mm, for vertical or horizontal use. EPDM tape seals between the rail and the roof covering; the rail is fixed with a sealed screw. A pre-assembled clamp set is fastened to the rail with an M8 bolt and tightened at the PV panel maker’s recommended point and torque.

Bursa

ELC Alüminyum Sanayi ve Ticaret A.Ş.

ELC Solar Roof and Ground Mounting Systems

Roof Solar Carrier System

For open-field solar plants, ELC Solar offers mounting structures with aluminium support columns and project-specific components designed for fast installation, high strength and different terrain and climate conditions. Rooftop systems for flat and pitched roofs are configured with profile and fastener options for low weight and efficient installation. Where standard systems are not enough, sections and components are designed from the project's structural requirements, site and mounting conditions.

Kayseri̇ · Kayseri Organized Industrial Zone

Asist Solar Alüminyum ve Enerji Sistemleri Sanayi ve Ticaret Limited Şirketi

Roof Solar Mounting Systems

Roof Solar Carrier System

Asist Solar manufactures sandwich-panel, trapezoidal, standing-seam, membrane, tile and flat-concrete roof mounting systems. All systems use original 6063 aluminium billet together with SD 52 and SD 37 steel. Every production stage is applied and recorded under the ISO 9001 quality system. The process is tracked digitally; production is carried out to TS EN 755 1-9, 12020, 4922, CE, Qualicoat (+Seaside), Qualanod and FTI, and specification conformity is confirmed with a 3D laser measuring device.

İzmi̇r

Seta Alüminyum

Roof Solar Mounting Systems

Roof Solar Carrier System

Solar plants can be installed on open ground or on factory, school and hospital roofs. Seta Alüminyum makes aluminium mounting for trapezoidal sheet, sandwich-panel, standing-seam, flat and tiled roofs. Profiles are EN-AW 6063-T6 and EN-AW 6063-T66 construction and clamp forms, also supplied machined to the customer project.

Ki̇li̇s · Kilis Organized Industrial Zone

Standart Alüminyum

Solar Mounting Systems

Roof Solar Carrier System

Solar mounting systems use optimised fasteners so installation is faster and safer. Improved profile geometry is described as giving high load capacity and durable performance in demanding climates. Rails and accessories are designed as one system, with components for all roof types. Product visuals cover S-Clamp, S-Raptor and S-Guard InternalConnectors for rooftop mounting, anodized solar aluminium profiles and connectors. Layout plans, static calculations and system configuration are prepared project by project.

Kirklareli̇ · Kirklareli Organized Industrial Zone

Seral Cephe Sistemleri San. ve Tic. Ltd. Şti.

Rooftop Solar Mounting Systems

Roof Solar Carrier System

For rooftop solar mounting systems Seral produces corrosion-resistant aluminum carrier profiles, rails, brackets and clamps. Its solar aluminum products are made to international quality standards for global PV installations. Contractors, EPC companies and distributors use these roof-mount rails and connecting parts for rooftop arrays.

İstanbul

ERL Solar Montaj Sistemleri

Roof Mounting Systems

Roof Solar Carrier System

These are the solar mounting systems offered by ERL Solar Mounting Systems for installation on roofs. It is the most common installation site for buildings; suitable installation can be provided for any roof structure. The company offers panel mounting solutions for residential and commercial roofs. The mounting structures are widely used on sandwich panel, metal, membrane, concrete and tiled roofs.

Ankara

Alkor Solar Sistemleri

West-East Side Mounting System on Flat Roof

Roof Solar Carrier System

Alkor has been produced as a solution to flat roof type solar roof projects. East-West construction has been produced as a solution for roofs on all kinds of flat floors. 4 panels, 2x2, can be applied to each construction. It has an angle of 15°. The adjustable length of the clamps is suitable for all panel types; two pieces are applied to the right and left parts of the panel. It is applied with a concrete weight system, long profiles and triangular legs. It is produced from 6063 aluminum and acts on a flat surface with 3 profiles.

İzmi̇r · ITOB Organized Industrial Zone

NLB Solar Enerji A.Ş.

Rooftop PV Mounting Systems

Roof Solar Carrier System

NLB Solar manufactures mounting systems for every roof type. After receiving project location, roof type and panel layout, it prepares an optimized construction layout and price offer and solves static projects to TSE and Eurocode. Pitched-roof lines include NLB LongRail StudBolt (purlin connection on trapezoidal sheet, sandwich panel and shingle), LongRail TileMount under tiles, LongRail ClipMount on standing seams without screws, LongRail SideMount, Short Rail and Mini Rail. Flat-roof NLB Flat Roof South and EastWest systems are supplied for gravel, concrete, bitumen and membrane, with screws and sealing included.

İstanbul

STA Solar Montaj Sistemleri

STA Self Weight

Roof Solar Carrier System

STA Self Weight is installed on roofs with panels angled at 5–15 degrees in an east/west and south orientation. It is a self-supporting system that does not require additional weight; it allows for easy installation. It is manufactured from aluminium. Installation is practical and straightforward, and transport is ergonomic.

Adana · Kozan Organized Industrial Zone

STA Solar Montaj Sistemleri

Assan Kenet

Roof Solar Carrier System

Assan Kenet is applied on standing-seam sandwich panel and standing-seam trapezoidal sheet roofs, perpendicular or parallel to the corrugation direction. Profile length is standing-seam clamp plus rail, or clamp only; layout is horizontal or vertical, and the joint element is the standing-seam clamp. It can be mounted by clamping with fittings suitable for all standing-seam roof brands. In vertical layouts the clamp and rail are used together; in horizontal layouts the clamp alone can be used if preferred. The lockable fibre-nut system provides a safer solution under static loads.

Adana · Kozan Organized Industrial Zone

No image

Garanti Çelik Yapı

Industrial Rooftop PV Carrier Systems

Roof Solar Carrier System

For industrial rooftop PV, existing factory or warehouse roofs are surveyed: column and beam thicknesses are measured and GES dead load (module + rails) is added to snow load in the static model. If capacity is insufficient, light steel or aluminium alloy stiffeners are added to main columns or trusses. Standing-seam, trapezoidal or sandwich-panel clamps grip the ribs without drilling the sheet; mini rails, L feet and clamps are supplied. Thinner Magnelis® / ZM roll-formed profiles may be used to cut roof load. Site welding is avoided so the galvanizing stays intact; kits arrive pre-punched for bolted assembly.

İstanbul

No image

Solmet

Roof-top Solar Mounting Systems

Roof Solar Carrier System

Roof-top solar mounting systems are produced for flat, trapezoid and tile roofs. SM16 is a flat roof aluminum mounting system fixed by the ballast system; it is used for PV projects on large and small-sized roofs and does not require any fastener for installation. SM17 is a trapezoid roof aluminum mounting system. SM18 is a tile roof steel and aluminum mounting system. The systems are produced with advanced machinery and equipment. The high-level engineering design provides assembly and cost advantages.

Bursa · NOSAB Organized Industrial Zone

DGN Profil San. ve Tic. Ltd. Şti.

Solar Panel Mounting Systems

Roof Solar Carrier System

DGN Profil solar panel mounting systems are galvanized steel structures for ground-mount, roof-mount and sloped-site photovoltaic arrays. Daily output is 3 MW and annual capacity 800 MW, with more than 1500 MW produced to date and a 10-year warranty. Roof and ground-mount carriers, project-specific profiles and high-strength galvanized steel are used on solar plants, industrial, factory and warehouse roofs and agricultural greenhouse projects.

Kocaeli̇

No image

Solarçelik

41x41 C Profile

Roof Solar Carrier System

The 41x41 C profile is the standard main carrier rail and purlin section for solar plant structures. Section: A 41 mm base, B 41 mm web, C 10 mm lip. Thickness 1.5–2.5 mm; pregalvanized weight 1.52 kg/m at 1.50 mm, 1.98 kg/m at 2.00 mm and 2.42 kg/m at 2.50 mm. Moments Ix 2.85 cm⁴, Iy 3.92 cm⁴. Grades S250GD, S350GD, DX51D; coatings TS EN 10346 and TS EN ISO 1461. 11x25 mm CNC oval slots at 50 mm pitch. Stock lengths 3 m, 4.2 m, 6 m, 6.2 m; cut-to-length 1,000–12,000 mm. Used with mid/end clamps and hammer-head bolts on rooftop rails and ground-mount purlins.

İstanbul

Solarred

Rooftop PV Systems / Rail Profiles

Roof Solar Carrier System

Solarred rooftop PV systems are support structures made to fit every roof type. PRO-101 rail profiles are supplied in full length or in sections; rail heights are 55 mm, 80 mm and 100 mm, with AL6063 quality certification. They suit horizontal and vertical layouts. Systems designed for both pitched and flat roofs are customised to roof type and dimensions. The engineering team runs static calculations against local climate; light but strong materials keep extra roof load low and installation is fast.

Ankara

Yapıdetay Enerji San. ve Tic. Ltd. Şti.

NovaFlat Solar Mounting System

Roof Solar Carrier System

NovaFlat Solar Mounting System is compatible with flat roofs. It is a continuous profile system fixed to the cladding or load-bearing structure, for roofs with or without an insulation layer, with placement parallel to the roof slope. Design conforms to EN 16999 Euro Norm. Area of usage: PVC and TPO membrane roofs and flat concrete roofs; compatible solar panel width 900–1150 mm, length 1600–2250 mm, thickness 30–50 mm; roof slope between 1.5° and 5°. Materials: aluminium EN AW 6063 T66, stainless A2-70, galvanized metal and membrane; fastener type screw; profile heights H40 and H65.

İstanbul · Istanbul Leather OSB

Yapıdetay Enerji San. ve Tic. Ltd. Şti.

NovaTile Flex Solar Mounting System

Roof Solar Carrier System

NovaTile Flex Solar Mounting System is compatible with pitched tile roofs. It is a continuous profile system fixed to the load-bearing structure; profile placement can be perpendicular or parallel to the roof ridge axis and does not add load to the cladding. Design conforms to EN 16999 Euro Norm. Area of usage: tile roof; compatible solar panel width 900–1150 mm, length 1600–2250 mm, thickness 30–50 mm; roof slope between 5° and 75°. Materials: aluminium EN AW 6063 T66 and stainless A2-70; fastener type screw; profile heights H40 and H65.

İstanbul · Istanbul Leather OSB

Isotec Enerji A.Ş.

ISOTRAP S Trapezoidal and Sandwich Roof Mounting System

Roof Solar Carrier System

ISOTRAP S is a mounting-system family for installing PV modules horizontally or vertically on trapezoidal and sandwich-clad industrial roofs. It is offered in four profile heights — S20, S50, S60-NX and S85 (20/50/60/85 mm); each variant comes in 290, 385 and 540 mm standard lengths plus a 4,300 mm long length. Profiles are Aluminium 6063-T66; fixing uses EasyClamp universal clamps, sealed pointed screws and EPDM tapes. Weight is about 0.8 kg/m²; panel sizes L 640–1,960 mm, W 990–1,010 mm, H 30–45 mm. Application: pitched trapezoidal and sandwich roofs.

Kocaeli̇ · Kocaeli Gebze VI(IMES)Makine Ihtisas Organized Industrial Zone