Product description
More from this company
Solmet
Trapezoid and Tile Roof Mounting Profiles
Panel Mounting ProfileThe trapezoid roof aluminum mounting system (SM17) is used for PV projects on large and small-sized roofs. The tile roof steel and aluminum mounting system (SM18) is mounted on tile roofs and applied on the same scale of rooftop PV projects. System elements are produced with advanced machinery and equipment. The high-level engineering design provides assembly and cost advantages.
Bursa · NOSAB Organized Industrial Zone
Solmet
Ground Fixed Solar Mounting Systems
Solar Steel StructureGround-fixed solar mounting systems are steel structures for open terrain. SM01 and SM02 are ground-driven systems with 2 vertical or 4 horizontal panels for large and medium-sized terrains. SM03 and SM04 use screw piles on irregular terrains; the screw piles have high-strength properties, can be used any time of the year and are not affected by wind or storm vibration. SM05–SM08 are concrete-base anchored or concrete-embedded column systems for sloped and loose ground. SM09 is a ground-driven single-column system used on hard ground to decrease the number of legs and cost. The high-level engineering design provides assembly and cost advantages.
Bursa · NOSAB Organized Industrial Zone
Related products
Stark Mounting
Flat-Roof PV Mounting Systems
Roof Solar Carrier SystemRooftop PV installations demand structural precision and controlled load management. Stark flat-roof systems are engineered to minimize penetration, protect roof membranes, and optimize ballast distribution under high wind and snow conditions. Each system is custom-designed according to roof type, load capacity and local climate, with a corrosion warranty of up to 25 years, using aluminium and coated-steel components for waterproofing-focused commercial roofs.
İzmi̇r
Fixus
Sandwich Panel Roof System (FIX-SP)
Roof Solar Carrier SystemFIX-SP is a mounting structure made for sandwich-panel roofs. Rails are 6063 T6 aluminium; fasteners are Ss 304 stainless or hot-dip galvanized steel. Install location: sandwich panel; tilt 10°-60°; roof height max. 20m; wind < 60m/s; snow
Ankara · Ankara Dokumculer Ihtisas Organized Industrial Zone
Fixus
Solar-Ready Capped Sandwich Panel System
Roof Solar Carrier SystemOn solar-capped sandwich-panel roofs the module is fixed on the cap form. Cap height, width, sheet thickness and insulation density differ by panel brand, so a matching clamp is required. The Fixus cap-compatible system uses a seating face matched to the cap, a wide contact area, high pull-out connection, EPDM sealing and corrosion-resistant materials. Tilt 10°-60°, roof height max. 20m, wind < 60m/s, snow
Ankara · Ankara Dokumculer Ihtisas Organized Industrial Zone
Solarela
Roof Systems
Roof Solar Carrier SystemRoof systems for trapezoidal and sandwich roofs are fastened with standard roof screws. Rails and clamps are aluminium EN AW 6063-T6; fasteners stainless A2-70; brackets stainless 304 and aluminium EN AW 6063-T6; sealing is EPDM. Module orientation is landscape or portrait. On-roof aluminium supply is 1,500 tons per month, processing EN-AW-6060, EN-AW-6063 and EN-AW-6082 with T5 and T6 heat treatment, for roof integration, waterproofing, aerodynamic design and quick installation.
Bursa