Product description
More from this company
Alkor Solar Sistemleri
Component Profile on Sandwich Panel - Horizontal Layout
Panel Mounting ProfileAlkor has been produced as a solution to solar roof projects in sandwich panel structure, for roofs of all kinds of sandwich panel types with adjustable-length profiles. Clamps are compatible with all panel types with adjustable length; two pieces are applied to the right and left parts of the panel. Aluminum profiles are applied between 2 ribs. Projecting is done by choosing the most suitable profile type for the roof. It provides a solution with the profile length suitable for the roof type, maximum strength with 4-point rib connection, piece-length profiles and horizontal placement, and is produced from 6063 aluminum.
İzmi̇r · ITOB Organized Industrial Zone
Alkor Solar Sistemleri
Mounting System With 2 Vertical Panels on Concrete
Panel Mounting ProfileAlkor has been produced as a solution to land type GES projects. It can be applied to all kinds of land types with the concrete floor it is on. It has 2 vertical panel layouts, is compatible with all panel sizes and has an angle of 30°. It can be applied to all floors thanks to installation on a concrete floor. Clamps are compatible with all panel types; two pieces are applied to the right and left parts of the panel. Minimum 2x4 and maximum 2x20 vertical panel layout, double column structure, concrete-floor application and 6063 aluminum manufacture are specified.
İzmi̇r · ITOB Organized Industrial Zone
Related products
Stark Mounting
Flat-Roof PV Mounting Systems
Roof Solar Carrier SystemRooftop PV installations demand structural precision and controlled load management. Stark flat-roof systems are engineered to minimize penetration, protect roof membranes, and optimize ballast distribution under high wind and snow conditions. Each system is custom-designed according to roof type, load capacity and local climate, with a corrosion warranty of up to 25 years, using aluminium and coated-steel components for waterproofing-focused commercial roofs.
İzmi̇r
Fixus
Sandwich Panel Roof System (FIX-SP)
Roof Solar Carrier SystemFIX-SP is a mounting structure made for sandwich-panel roofs. Rails are 6063 T6 aluminium; fasteners are Ss 304 stainless or hot-dip galvanized steel. Install location: sandwich panel; tilt 10°-60°; roof height max. 20m; wind < 60m/s; snow
Ankara · Ankara Dokumculer Ihtisas Organized Industrial Zone
Fixus
Solar-Ready Capped Sandwich Panel System
Roof Solar Carrier SystemOn solar-capped sandwich-panel roofs the module is fixed on the cap form. Cap height, width, sheet thickness and insulation density differ by panel brand, so a matching clamp is required. The Fixus cap-compatible system uses a seating face matched to the cap, a wide contact area, high pull-out connection, EPDM sealing and corrosion-resistant materials. Tilt 10°-60°, roof height max. 20m, wind < 60m/s, snow
Ankara · Ankara Dokumculer Ihtisas Organized Industrial Zone
Solarela
Roof Systems
Roof Solar Carrier SystemRoof systems for trapezoidal and sandwich roofs are fastened with standard roof screws. Rails and clamps are aluminium EN AW 6063-T6; fasteners stainless A2-70; brackets stainless 304 and aluminium EN AW 6063-T6; sealing is EPDM. Module orientation is landscape or portrait. On-roof aluminium supply is 1,500 tons per month, processing EN-AW-6060, EN-AW-6063 and EN-AW-6082 with T5 and T6 heat treatment, for roof integration, waterproofing, aerodynamic design and quick installation.
Bursa