Industrial category
Process Equipment
Turkish manufacturers and suppliers in Process Equipment.
Subcategories
Heat Exchangers
Turkish manufacturers and suppliers in Heat Exchangers.
Pressure Vessels
Turkish manufacturers and suppliers in Pressure Vessels.
Mixers
Turkish manufacturers and suppliers in Mixers.
Ovens
Turkish manufacturers and suppliers in Ovens.
Furnaces
Turkish manufacturers and suppliers in Furnaces.
Heating Elements
Turkish manufacturers and suppliers in Heating Elements.
Tanks
Turkish manufacturers and suppliers in Tanks.
Drying Machines
Turkish manufacturers of industrial drying machines and drying systems.
Top industrial zones
Products in This Category
Approved supplier product catalogs in this category.
Tanpera A.Ş.
Gasketed Plate Heat Exchanger
Plate Heat ExchangerTanpera Gasketed Plate Heat Exchangers increase the heat transfer coefficient through turbulence on the plate surfaces while delivering high capacity in compact dimensions. Gasketed or welded design options are selected according to fluid compatibility and operating pressure. Plates are typically manufactured from AISI 304 or AISI 316 stainless steel; for aggressive fluids, titanium or special alloys are used. Gasket materials are selected as EPDM, NBR, or Viton according to fluid temperature and chemistry. Thanks to the modular plate pack, capacity can be increased or reduced in a controlled manner on site. Applications include HVAC, food and beverage pasteurization, chemical and petrochemical processes, and energy recovery.
İstanbul
Tanpera A.Ş.
Spiral Heat Exchangers
General Heat ExchangersTanpera Spiral Heat Exchangers provide reliable heat transfer for fluids with high solids content such as sludge, wastewater, pulp, high-viscosity hydrocarbons, and fiber-laden liquids. Channel height can be designed in the 6–50 mm range, suitable for continuous operation with dirty fluids. Single-piece or openable body options offer ease of maintenance and cleaning. Channels and body are typically AISI 304/316 stainless steel; duplex or special alloys are used for aggressive chemicals. Typical sectors are pulp and paper, wastewater heating, chemical processes, food production, and marine. Manufactured at the Gebze Free Zone facility.
İstanbul
Tanpera A.Ş.
Buffer Thermal Balance Tank
Process / Storage TankA buffer thermal balance tank adds water volume to a cooling circuit and reduces temperature swings. Tanpera BF tanks are delivered in the 100–5000 litre range, insulated and with flanged connections. The shell is carbon steel or stainless steel; insulated models minimise heat loss. In chilled-water applications the tank increases system water volume; a baffle plate matched to the volume supports homogeneous distribution and air separation. It provides hydraulic balance on chiller and heat-pump circuits and is recommended for data-centre cooling, central chiller plants, and industrial process cooling. Delivered with an insulated shell and double-layer anti-corrosion protection.
İstanbul
TBT Tankbau Teknik Basınçlı Kaplar San. Tic. Ltd. Şti.
Oxygen Generators
Process Equipment ProductEngineered with advanced PSA (Pressure Swing Adsorption) technology, our oxygen generators efficiently meet your facility's demand for a high-purity, continuous oxygen supply. By eliminating the reliance on external gas procurement and significantly optimizing operational costs, these systems are manufactured in strict compliance with international quality and safety standards, ensuring 24/7 safe operation and a prolonged service life. Compact systems suited to hospitals, industry and fish farms.
İstanbul · Ikitelli Organized Industrial Zone
TBT Tankbau Teknik Basınçlı Kaplar San. Tic. Ltd. Şti.
Nitrogen Generators
Process Equipment ProductDesigned with PSA (Pressure Swing Adsorption) technology, our nitrogen generators enable on-site production of high-purity nitrogen, up to 99.9 percent from compressed air, tailored to the facility. They remove dependence on cylinder or liquid-gas logistics. Typical uses include food packaging, chemicals, laser cutting, electronics, pharmaceuticals and metalworking, manufactured for operational safety and long-lasting performance to international standards.
İstanbul · Ikitelli Organized Industrial Zone
TBT Tankbau Teknik Basınçlı Kaplar San. Tic. Ltd. Şti.
Screed vessel
Pressure Vessels ProductOur industrial and construction screed vessels are engineered from specialized steel alloys to deliver exceptional thermal and mechanical durability in strict compliance with international standards. Every unit undergoes rigorous hydrostatic testing and is fully certified by European Notified Bodies. All our products are manufactured to guarantee maximum operational safety and a prolonged service life.
İstanbul · Ikitelli Organized Industrial Zone
Simgetek İmalat ve Mühendislik A.Ş.
Storage Tanks
Pressure Vessels ProductFixed and floating-roof tanks are manufactured and assembled. Storage tanks including spherical tank assembly are produced in accordance with TEMA, ASME, API and AD 2000 standards. Simgetek provides equipment design and manufacture for chemical, refining, petrochemical, fertiliser, gas and steel sectors in compliance with TEMA, ASME, API and AD 2000 standards.
Adana · Adana Haci Sabanci Organized Industrial Zone
Simgetek İmalat ve Mühendislik A.Ş.
Pressure Tanks
Pressure Vessels ProductSA-516 Gr.70 quality pressure tanks are designed in accordance with ASME Sec.VIII Div.1 and manufactured with ASME U-Stamp and CE marking. Tanks can be manufactured in a single piece and heat-treated after fabrication. Project-based production in various grades including SS 304 and SA-387 Gr.22.
Adana · Adana Haci Sabanci Organized Industrial Zone
Simgetek İmalat ve Mühendislik A.Ş.
Custom Process Equipment
Pressure Vessels ProductSimgetek provides equipment design and manufacture as well as complete plant construction for organisations in chemical, oil refining, petrochemical, fertiliser, gas and steel sectors. Equipment is manufactured and assembled in accordance with international codes and standards including TEMA, ASME, API and AD 2000-MERKBLATT.
Adana · Adana Haci Sabanci Organized Industrial Zone
Çukurova Bombe ve Makina Sanayi Tic. Ltd. Şti.
CE Certified Air Receivers
Pressure Vessels ProductBranded air receivers built to DIN, CE, TÜV, Bureau Veritas, RINA, DNV GL, GOST standards under Chamber of Mechanical Engineers supervision. Manufactured to required pressure ranges.
Adana · Adana Haci Sabanci Organized Industrial Zone
Çukurova Bombe ve Makina Sanayi Tic. Ltd. Şti.
Gas Fire Suppression Cylinders
Pressure Vessels ProductGas cylinders to EN 13322-1 and EN 14208, TPED PI MARKED; 5–423 litres at 25 and 42 bar. Used with HFC-125, HFC-227ea, FK-5-1-12 clean-agent fire suppression systems.
Adana · Adana Haci Sabanci Organized Industrial Zone
Çukurova Bombe ve Makina Sanayi Tic. Ltd. Şti.
Pressed Elliptical and Torispherical Dished Heads
Pressure Vessels ProductElliptical and torispherical pressed dished heads from 48 mm to 1150 mm diameter. Eases cylinder assembly; cord-welded pressed heads preferred for automated welding. Geometry suitable for fast automated welding.
Adana · Adana Haci Sabanci Organized Industrial Zone
Services in This Category
Approved supplier service catalogs in this category.
Tanpera A.Ş.
Plate Heat Exchanger Maintenance
Heat Exchangers ServiceTanpera offers professional maintenance on site or in the workshop for every heat exchanger brand and model — especially Tanpera, Danfoss, and Sondex. The process covers plate disassembly, wear/scaling/deformation checks, chemical cleaning of plate surfaces, gasket renewal with original or compatible gaskets when needed, hanger-bar inspection and adjustment, and delivery after system tests. Plate, gasket, heating-element, and anode supply and replacement are part of the service offering. For clean fluids an annual inspection may suffice; for scale or biofilm risk, plate cleaning every 6–12 months is recommended.
İstanbul
Tanpera A.Ş.
Boiler and Accumulation Tank Maintenance
Tanks ServiceBoilers and accumulation tanks should be maintained at least once a year. Parts that need replacement, such as anode rods and heating elements, should be checked regularly and replaced when necessary. Tanpera provides maintenance for systems of its own manufacture as well as for all brands and models. Boiler maintenance steps include corrosion checks, leak checks, anode and coil checks, internal cleaning, and earthing/grounding checks. The service desk is reachable at [email protected] and +90 533 621 06 72. Periodic maintenance is offered so equipment operates for a long life, efficiently and safely.
İstanbul
TBT Tankbau Teknik Basınçlı Kaplar San. Tic. Ltd. Şti.
Pressure Vessel Manufacturing
Pressure Vessels ServiceCE and PED 2014/68/EU certified pressure vessel manufacturing in Istanbul Ikitelli OSB. Scope includes stainless steel (AISI 304, 316L) and carbon steel vessels, air receiver / compressor tanks, LPG, LNG and CNG tanks, and ammonia and chemical tanks. Production is referenced to ASME Section VIII Division 1 (U Stamp), EN 13445 and AD 2000 Merkblatt, with NDT (RT, UT, PT, MT) and hydrostatic testing.
İstanbul · Ikitelli Organized Industrial Zone
TBT Tankbau Teknik Basınçlı Kaplar San. Tic. Ltd. Şti.
Industrial Tank Production
Tanks ServiceIndustrial storage tank production, non-pressurized process tanks, double-wall tank systems, silos and bunkers, water tanks and fuel tanks. Carbon steel tanks and stainless vessels are built to customer specification at the Ikitelli OSB plant, including custom tank fabrication for energy, chemical, food and water-treatment applications.
İstanbul · Ikitelli Organized Industrial Zone
Simgetek İmalat ve Mühendislik A.Ş.
Steel Construction Fabrication and Assembly
Pressure Vessels ServiceAll types of steel construction manufacture and assembly are activity areas. Construction, equipment installation, process piping, electrical and instrumentation, and HVAC works for industrial facilities are performed.
Adana · Adana Haci Sabanci Organized Industrial Zone
Simgetek İmalat ve Mühendislik A.Ş.
Project Detailing
Pressure Vessels ServiceProject detailing services are among the activity areas. Complete design, engineering, manufacture and assembly of industrial facilities have been undertaken since 1988. Simgetek provides equipment design and manufacture for chemical, refining, petrochemical, fertiliser, gas and steel sectors in compliance with TEMA, ASME, API and AD 2000 standards.
Adana · Adana Haci Sabanci Organized Industrial Zone
Simgetek İmalat ve Mühendislik A.Ş.
Turnkey Plant Construction
Pressure Vessels ServiceSimgetek provides complete plant construction on a turnkey basis for chemical, refining, petrochemical, fertiliser, gas and steel sector clients when required. Projects requiring engineering knowledge and experience can be delivered on a turnkey basis.
Adana · Adana Haci Sabanci Organized Industrial Zone
Çukurova Bombe ve Makina Sanayi Tic. Ltd. Şti.
Project-Based Custom Manufacturing
Pressure Vessels ServiceCustomer-based requests are engineered and manufactured. Custom pressurized and non-pressurized vessel manufacturing at the 10,000 m² AOSB facility.
Adana · Adana Haci Sabanci Organized Industrial Zone
Çukurova Bombe ve Makina Sanayi Tic. Ltd. Şti.
Contract Plasma Cutting
Pressure Vessels ServiceContract plasma cutting service offered together with sheet processing capacity. Sheet cutting needs met for industrial plant and pressure vessel projects.
Adana · Adana Haci Sabanci Organized Industrial Zone
Çukurova Bombe ve Makina Sanayi Tic. Ltd. Şti.
Contract Press Forming
Pressure Vessels ServiceContract press forming services offered to customers. Press capacity used in head and vessel manufacturing also available for subcontract work.
Adana · Adana Haci Sabanci Organized Industrial Zone
Barış Endüstriyel Enerji Sistemleri A.Ş.
Heat Recovery Projects
Pressure Vessels ServiceServices include preparation of heat recovery projects for energy savings in facilities, manufacturing of required heat equipment on site, and turnkey contracting of these projects.
Adana · Adana Haci Sabanci Organized Industrial Zone
Barış Endüstriyel Enerji Sistemleri A.Ş.
Thermal Deaerator Systems
Pressure Vessels ServiceO2 removal down to 7 ppb (0.005 cc/l) and complete CO2 venting are targeted. Production up to 100 ton/h is available. Deaerator application extends boiler and steam line service life.
Adana · Adana Haci Sabanci Organized Industrial Zone
Suppliers in This Category
57 suppliers
For buyers
Get quotes from Process Equipment suppliers
Browse verified companies below or describe your need to collect multiple quotes in Process Equipment quickly.
-
Verified profiles and certifications
-
Multiple quotes from one RFQ
-
Filter by capability and location
Browse Related Categories
Discover suppliers in adjacent industrial sectors.
General
Cross-industry blog posts and TurkIndustry announcements.
Metal Processing
Turkish manufacturers and suppliers in Metal Processing.
Adhesives & Sealants
Turkish manufacturers and suppliers in Adhesives & Sealants.
Plastics & Rubber
Turkish manufacturers and suppliers in Plastics & Rubber.
Automation & Electronics
Turkish manufacturers and suppliers in Automation & Electronics.
Casting
Turkish manufacturers and suppliers in Casting.
Chemicals
Turkish manufacturers and suppliers in Chemicals.
Sheet Metal
Turkish manufacturers and suppliers in Sheet Metal.
Featured Supplier Profiles
Capability, certification, and export profiles with enough suppliers in this category.
Serial Production — Process Equipment manufacturers
87 approved suppliers
CertificationISO 9001 certified Process Equipment suppliers
79 approved suppliers
MaterialStainless Steel — Process Equipment manufacturers
76 approved suppliers
Technical standardEN — Process Equipment manufacturers
75 approved suppliers
MaterialCarbon Steel — Process Equipment manufacturers
62 approved suppliers
IndustryMachinery Manufacturing — Process Equipment suppliers
58 approved suppliers
ExportProcess Equipment suppliers exporting to Germany
50 approved suppliers
CertificationCE Marking certified Process Equipment suppliers
49 approved suppliers
ProcessHigh-Volume Production — Process Equipment manufacturers
49 approved suppliers
IndustryConstruction — Process Equipment suppliers
48 approved suppliers
IndustryEnergy — Process Equipment suppliers
47 approved suppliers
ExportProcess Equipment suppliers exporting to France
36 approved suppliers
Featured Product Catalogs
Standard product types with enough suppliers in this category.
General Heat Exchangers — Heat Exchangers products
20 suppliers
Product catalogPressure Vessels Product — Pressure Vessels products
16 suppliers
Product catalogProcess / Storage Tank — Tanks products
9 suppliers
Product catalogGeneral Tanks — Tanks products
9 suppliers
Product catalogCondensing Combi Boiler — Heating Elements products
7 suppliers
Product catalogAgitated Tank / Reactor — Tanks products
6 suppliers
Product catalogShell-and-Tube Heat Exchanger — Heat Exchangers products
6 suppliers
Product catalogFurnaces Product — Furnaces products
6 suppliers
Product catalogPlate Heat Exchanger — Heat Exchangers products
5 suppliers
Product catalogGeneral Heating Elements — Heating Elements products
5 suppliers
Product catalogMixers Product — Mixers products
4 suppliers
Product catalogProcess Equipment Product — Process Equipment products
4 suppliers
Featured Service Catalogs
Standard service types in this category that meet the supplier threshold.
Heat Exchangers Service — Heat Exchangers services
19 suppliers
Service catalogTanks Service — Tanks services
12 suppliers
Service catalogPressure Vessels Service — Pressure Vessels services
12 suppliers
Service catalogBoiler Manufacturing — Heating Elements services
12 suppliers
Service catalogAuthorized Service Support — Heating Elements services
12 suppliers
Service catalogProcess Piping Installation — Process Equipment services
5 suppliers
Service catalogFurnaces Service — Furnaces services
4 suppliers
Service catalogMixers Service — Mixers services
3 suppliers
Find the right supplier or list your company
Send RFQs as a buyer or publish your company profile in this category.