Product description

Tanpera Spiral Heat Exchangers provide reliable heat transfer for fluids with high solids content such as sludge, wastewater, pulp, high-viscosity hydrocarbons, and fiber-laden liquids. Channel height can be designed in the 6–50 mm range, suitable for continuous operation with dirty fluids. Single-piece or openable body options offer ease of maintenance and cleaning. Channels and body are typically AISI 304/316 stainless steel; duplex or special alloys are used for aggressive chemicals. Typical sectors are pulp and paper, wastewater heating, chemical processes, food production, and marine. Manufactured at the Gebze Free Zone facility.

More from this company

Gasketed Plate Heat Exchanger — Tanpera A.Ş.

Tanpera A.Ş.

Gasketed Plate Heat Exchanger

Plate Heat Exchanger

Tanpera Gasketed Plate Heat Exchangers increase the heat transfer coefficient through turbulence on the plate surfaces while delivering high capacity in compact dimensions. Gasketed or welded design options are selected according to fluid compatibility and operating pressure. Plates are typically manufactured from AISI 304 or AISI 316 stainless steel; for aggressive fluids, titanium or special alloys are used. Gasket materials are selected as EPDM, NBR, or Viton according to fluid temperature and chemistry. Thanks to the modular plate pack, capacity can be increased or reduced in a controlled manner on site. Applications include HVAC, food and beverage pasteurization, chemical and petrochemical processes, and energy recovery.

İstanbul

Buffer Thermal Balance Tank — Tanpera A.Ş.

Tanpera A.Ş.

Buffer Thermal Balance Tank

Process / Storage Tank

A buffer thermal balance tank adds water volume to a cooling circuit and reduces temperature swings. Tanpera BF tanks are delivered in the 100–5000 litre range, insulated and with flanged connections. The shell is carbon steel or stainless steel; insulated models minimise heat loss. In chilled-water applications the tank increases system water volume; a baffle plate matched to the volume supports homogeneous distribution and air separation. It provides hydraulic balance on chiller and heat-pump circuits and is recommended for data-centre cooling, central chiller plants, and industrial process cooling. Delivered with an insulated shell and double-layer anti-corrosion protection.

İstanbul

Related products

Heat Sinks and Heat Exchangers — Addpark İleri Mühendislik Teknolojileri A.Ş.

Addpark İleri Mühendislik Teknolojileri A.Ş.

Heat Sinks and Heat Exchangers

General Heat Exchangers

Addpark develops advanced heat sinks and heat exchangers with additive manufacturing. These components are used in electronics, automotive and aerospace to transfer heat from one location to another, regulate system temperature and prevent overheating. Where such parts are traditionally made by machining or casting, additive manufacturing allows complex geometries and internal features that those methods cannot produce. Addpark states that it carries out heat-exchanger research and development with institutes, universities and institutions.

Ankara

Evaporative Condenser — Ensotek CTP Su Soğutma Kuleleri Mühendislik San. Tic. Ltd. Şti.

Ensotek CTP Su Soğutma Kuleleri Mühendislik San. Tic. Ltd. Şti.

Evaporative Condenser

General Heat Exchangers

An evaporative condenser is a heat exchanger that condenses refrigerant vapour to liquid in a cooling system. Refrigerant circulates inside the coil, water is sprayed onto the coil, a fan moves air across it and heat is rejected by evaporation. Ensotek designs and manufactures project-specific evaporative condensers according to capacity, ambient temperature and humidity, refrigerant type and water quality. Applications include ammonia and freon refrigeration, chiller groups, process cooling, power plants, cold stores and food plants. The casing can be galvanized or stainless steel, and the heat-transfer surface is a coil.

İstanbul

Chocolate and Caramel Heat Exchangers — Haker Makine Endüstriyel Mühendislik Ltd. Şti.

Haker Makine Endüstriyel Mühendislik Ltd. Şti.

Chocolate and Caramel Heat Exchangers

General Heat Exchangers

Single-tube and double-tube chocolate and caramel heat exchangers are built. The jacketed stator carries food-grade Teflon scrapers, the rotor body is Teflon coated and the stator is insulated with rock wool. Product temperature is measured by thermocouples and drive power is transmitted by a chain and sprocket system. Chocolate units cover 100-750 kg and caramel units 100-600 kg; frame and covers can be AISI 304 or ST37.

İstanbul

Heat Transfer Equipment — Adess Group

Adess Group

Heat Transfer Equipment

General Heat Exchangers

Shell and tube heat exchangers, water bath heaters and air-cooled heat exchangers (ACHE) for oil and gas, petrochemical, power and industrial applications. Equipment is designed according to process conditions such as pressure, temperature, flow rate and required thermal performance. Fabrication includes TEMA R, C and B class designs, ASME Section VIII Div. 1 plus U Stamp, PED 2014/68/EU and CE, shell-and-tube, U-tube and fixed tubesheet types, tube-to-tubesheet expansion and welding, HTRI thermal and hydraulic design software, and pickling and passivation with citric, nitric and phosphoric acid. Shell-and-tube units are offered as fixed tubesheet, floating tubesheet and U-tube; water bath heaters heat natural gas and other process fluids indirectly; ACHE units can be designed to ASME and API 661 with finned or bare tube bundles, plug or cover-plate headers and fan and drive systems. Materials include carbon steel, stainless steel, nickel alloys, copper alloys and duplex and super duplex.

Tekirdağ · Ergene-1 Organized Industrial Zone

Ready to Find Your Next Manufacturing Partner?

Explore Turkish manufacturers and industrial suppliers on TurkIndustry. Discover potential sourcing partners, submit RFQs and compare quotations — all from one platform.

Start Sourcing Today →