Industrial category
Logistics & Warehousing
Turkish manufacturers and suppliers in Logistics & Warehousing.
Subcategories
Popular products
Depota Raf Sistemleri İnş. İth. İhr. San. ve Tic. Ltd. Şti.
Heavy Duty Racking Systems
Warehouse Systems ProductHeavy-duty racking is the pallet rack preferred for heavy stocks, especially palletised loads; it is also called pallet stacking racking. The modular build lets the racks be dismantled and reinstalled in another area. Uprights formed for higher strength have holes for height adjustment, so beam levels can follow the type and weight of the stored goods. Locking pins between beam and upright, floor anchors and static bracing tie the system together. Beams are produced from NPI profile and the system is worked with a forklift. Every part is electrostatic powder coated. Depotaraf manufactures this system in its own plant in Kahramankazan.
Ankara
Depota Raf Sistemleri İnş. İth. İhr. San. ve Tic. Ltd. Şti.
Cantilever Racking Systems
Warehouse Systems ProductCantilever racking is made of vertical columns and horizontal arms fixed to them, so long goods such as pipe, profile, timber and sheet can be stored horizontally. Arms can be single- or double-sided, the upright row can be extended to the required length, and the arm layout can later be changed without special tools. Arm length follows the width of the material and arm spacing follows whether the load sags: spacing can be wider for rigid pipe and profile, and tighter for timber and sheet. The system is used for metal profiles, pipe, timber and plastic goods. A capacity label on the product page shows a maximum of 2000 kg on an arm. The system is manufactured at the Kahramankazan plant.
Ankara
Depota Raf Sistemleri İnş. İth. İhr. San. ve Tic. Ltd. Şti.
Light Duty Racking Systems
Warehouse Systems ProductLight-duty racking is for boxed goods that are handled by hand and do not need a high load capacity. It is built from shelves and box-section beams and can be installed in narrow areas. Uprights are made from sheet or profile according to the requirement. With accessories such as perforated panels, dividers, small-parts bins and hanging bars it is also used as display shelving in retail stores as well as in warehouses. The modular structure can be dismantled and moved. Uprights, beams and shelves are produced in a wide range of sizes. All parts are electrostatic powder coated. Depotaraf manufactures the product in its own factory.
Ankara
Eksen Raf
Heavy-Duty Racking Systems
Warehouse Systems ProductHeavy-duty racking is manufactured for orderly and safe storage of palletized goods in warehouses that work with forklifts and pallet trucks. The pallet rack uses floor area vertically, increases warehouse capacity, and gives separate access to each pallet. Solutions are produced for high-ceiling warehouses, cold stores and narrow-aisle layouts. Standard pallet capacities are 500, 800, 1,000 and 1,500 kg; length is 180 cm or 270 cm, depth is 105 cm, and height is up to 12 metres according to the project. The standard beam pitch is 110 cm and can be set to the required height on the demountable frame. Systems are finished with electrostatic powder coating; a seismic calculation and an earthquake report are supplied on request.
İstanbul
Popular services
Depota Raf Sistemleri İnş. İth. İhr. San. ve Tic. Ltd. Şti.
Racking Installation
Warehouse Systems ServiceRacking installation covers erecting the manufactured system on site, anchoring it to the floor and handing it over ready for use. Installation follows the layout approved at the design stage. The sequence is site preparation, a parts count after delivery, setting out, upright and beam assembly, floor fixing, and vertical and horizontal checks. Bracing and bolt tightness are reviewed before handover. In a warehouse that stays in operation, installation proceeds zone by zone. For projects in Ankara the crew is in the same city; elsewhere in Turkey, shipment and installation are planned according to project size.
Ankara
Depota Raf Sistemleri İnş. İth. İhr. San. ve Tic. Ltd. Şti.
Racking Design
Warehouse Systems ServiceRacking design determines how the warehouse will be laid out before a purchase decision. The area is measured on site; column spacing, ceiling and beam heights, door and shutter positions and floor condition are recorded. Aisle and bay layout follows product weight and size, how often goods are picked, and whether a forklift, pallet truck or reach truck is used. The plan is drawn, a three-dimensional view can be prepared on request, and production starts after approval. Survey, measurement and the layout plan are free of charge. The service is used for warehouses, archives, production plants, store back rooms and high-ceiling buildings.
Ankara
Depota Raf Sistemleri İnş. İth. İhr. San. ve Tic. Ltd. Şti.
Racking Dismantling and Reinstallation
Warehouse Systems ServiceBolted, modular racking can be dismantled and reinstalled at another address. When a warehouse moves, the existing system is inventoried, parts are grouped and marked during dismantling, and damaged components are set aside. A survey is made for the new warehouse; if the dimensions differ, the layout is redrawn, and the same system may not be rebuilt in exactly the same arrangement in another building. Missing or damaged parts can be remade in the same profile. For businesses changing warehouse, this keeps the investment in the system.
Ankara
Eksen Raf
Racking Installation and Assembly
Warehouse Systems ServiceThe installation crew carries out assembly on site, including intercity projects. Racking systems are delivered across Turkey with installation included. Heavy-duty racks are fixed to the floor with steel anchors; under the occupational safety regulation the top of the rack is also tied to the floor through seismic bracing. The systems are demountable and can be dismantled and reinstalled in another location without compromising the structure. Typical lead time is 2–3 weeks for heavy-duty projects and about 8 weeks for clad rack buildings.
İstanbul
Eksen Raf
Static Calculation and Earthquake Report
Warehouse Systems ServiceMezzanine projects include a load calculation per square metre and a static calculation. For clad rack systems, static calculations, earthquake-code requirements and wind loads are built into the design from the outset. A soil survey is required before installation, and the foundation design follows the soil report. For heavy-duty racking, a seismic calculation and an earthquake report are supplied on request. On clad-rack projects that need a building permit, the required technical documents are prepared.
İstanbul
Eksen Raf
Project-Specific Racking Manufacture
Warehouse Systems ServiceBesides standard sizes, length, depth, height and load capacity are manufactured to the project. On cantilever racks the standard arm length is 60 cm and custom production goes up to 100 cm; the system is built single-sided or double-sided and the level capacity is calculated for the load to be stored. Mezzanine decking can be MDF or steel sheet; the stair, guardrail and platform are included in the project. The site states a minimum mezzanine area of 400 m². All systems are finished with electrostatic powder coating and produced under ISO 9001:2015.
İstanbul
Top industrial zones
Products in This Category
Approved supplier product catalogs in this category.
Depota Raf Sistemleri İnş. İth. İhr. San. ve Tic. Ltd. Şti.
Heavy Duty Racking Systems
Warehouse Systems ProductHeavy-duty racking is the pallet rack preferred for heavy stocks, especially palletised loads; it is also called pallet stacking racking. The modular build lets the racks be dismantled and reinstalled in another area. Uprights formed for higher strength have holes for height adjustment, so beam levels can follow the type and weight of the stored goods. Locking pins between beam and upright, floor anchors and static bracing tie the system together. Beams are produced from NPI profile and the system is worked with a forklift. Every part is electrostatic powder coated. Depotaraf manufactures this system in its own plant in Kahramankazan.
Ankara
Depota Raf Sistemleri İnş. İth. İhr. San. ve Tic. Ltd. Şti.
Cantilever Racking Systems
Warehouse Systems ProductCantilever racking is made of vertical columns and horizontal arms fixed to them, so long goods such as pipe, profile, timber and sheet can be stored horizontally. Arms can be single- or double-sided, the upright row can be extended to the required length, and the arm layout can later be changed without special tools. Arm length follows the width of the material and arm spacing follows whether the load sags: spacing can be wider for rigid pipe and profile, and tighter for timber and sheet. The system is used for metal profiles, pipe, timber and plastic goods. A capacity label on the product page shows a maximum of 2000 kg on an arm. The system is manufactured at the Kahramankazan plant.
Ankara
Depota Raf Sistemleri İnş. İth. İhr. San. ve Tic. Ltd. Şti.
Light Duty Racking Systems
Warehouse Systems ProductLight-duty racking is for boxed goods that are handled by hand and do not need a high load capacity. It is built from shelves and box-section beams and can be installed in narrow areas. Uprights are made from sheet or profile according to the requirement. With accessories such as perforated panels, dividers, small-parts bins and hanging bars it is also used as display shelving in retail stores as well as in warehouses. The modular structure can be dismantled and moved. Uprights, beams and shelves are produced in a wide range of sizes. All parts are electrostatic powder coated. Depotaraf manufactures the product in its own factory.
Ankara
Eksen Raf
Heavy-Duty Racking Systems
Warehouse Systems ProductHeavy-duty racking is manufactured for orderly and safe storage of palletized goods in warehouses that work with forklifts and pallet trucks. The pallet rack uses floor area vertically, increases warehouse capacity, and gives separate access to each pallet. Solutions are produced for high-ceiling warehouses, cold stores and narrow-aisle layouts. Standard pallet capacities are 500, 800, 1,000 and 1,500 kg; length is 180 cm or 270 cm, depth is 105 cm, and height is up to 12 metres according to the project. The standard beam pitch is 110 cm and can be set to the required height on the demountable frame. Systems are finished with electrostatic powder coating; a seismic calculation and an earthquake report are supplied on request.
İstanbul
Eksen Raf
Steel Racking Systems
Warehouse Systems ProductThe steel rack carries up to 80 kg per level and is used where loading is done by hand. It is applied in offices, archives, garages, workshops, small warehouses and retail stock areas where light loads need orderly storage. Standard length is 75 cm or 93 cm; depth is 31 cm, 43 cm or 59 cm; height is 200 cm, 250 cm or 300 cm. Shelf pitch is adjustable, the system is demountable, and the installation location can be changed. In custom production the level capacity can be increased to order. Racks are manufactured to Turkish Standards, finished with electrostatic powder coating, and produced under the ISO 9001:2015 quality management system.
İstanbul
Eksen Raf
Clad Rack Buildings
Warehouse Systems ProductClad rack buildings are industrial steel structures erected on open land that serve both as the storage rack and as the load-bearing frame of the building. They provide high-volume warehouse space faster than conventional building construction. Each project is engineered to the site, the soil survey and the construction requirements. Static calculations, earthquake-code requirements and wind loads are included from the start. Dimensions and load capacity follow the project; the structure is steel and the finish is electrostatic powder coating. Roof and facade panel cladding can be included on request. A soil survey is carried out before installation, and the technical documents are prepared when a building permit is required.
İstanbul
Reta Mühendislik Depo Raf Sistemleri San. ve Tic. A.Ş.
Back-to-Back Racking System
Warehouse Systems ProductBack-to-back racking is the most widely used storage system for heavy goods stacked on pallets, crates or baskets, with a broad range of use. The system applies the FIFO (first in, first out) principle and suits storage of a large variety and quantity of products. Each pallet is stored in an independent bay. The modular structure of uprights, beams, connectors and protective accessories is engineered to pallet size, weight and forklift type. Rack height, bay clearance and number of levels change with the product.
Manisa · Muradiye Organized Industrial Zone
Reta Mühendislik Depo Raf Sistemleri San. ve Tic. A.Ş.
Drive-In Racking System
Warehouse Systems ProductDrive-in racking is a high-density storage solution for large quantities of products that are the same in type and characteristics. The forklift enters the lane inside the rack block to place and retrieve pallets, so fewer aisles are needed and more pallets fit in the same area. The system is engineered as a channel structure suited to LIFO, with pallet support rails and guide rails. It is used in food, beverage, chemical, logistics, production and cold-storage warehouses.
Manisa · Muradiye Organized Industrial Zone
Reta Mühendislik Depo Raf Sistemleri San. ve Tic. A.Ş.
Cantilever Racking System
Warehouse Systems ProductCantilever racking is used especially for stacking long goods. Uprights and arms selected by load allow a wide range of products to be stored. The structure consists of vertical columns and cantilever arms fixed to them. Long materials such as pipe, profile, panel, timber, chipboard and wooden sheet are placed directly on the arms with no obstruction in front of the rack. The system can be single-sided or double-sided; arm length, height and load capacity are planned to product length and weight.
Manisa · Muradiye Organized Industrial Zone
BNA Tarım ve İş Makineleri
180° Rotating Fork Carriage
Industrial Transport ProductThe 180° rotating fork carriage is a forklift rotator manufactured by BNA. It is listed for ISO 2328 mounting classes 2A, 3A and 4A, with capacities from 1,500 kg to 5,000 kg and a load centre of 500 or 600 mm. Rotator width is 1,000–1,230 mm, chassis width 1,200–1,300 mm and lost load distance 242 mm. The attachment is produced without forks; the forklift’s own forks are used. It has one hydraulic function. It turns and transports loads such as pallets, crates, boxes, casting ladles and containers through 180°. It can be built to rotate 180° in one direction or 90° in both directions.
Adana
BNA Tarım ve İş Makineleri
360° Rotator Bale Clamp
Industrial Transport ProductThe 360° rotator bale clamp is used for loading, unloading and storing bales such as cotton wool, piece cloth and recycling. It is listed in ISO class 2A at 1,600 kg and 2,200 kg capacity with a 500 mm load centre. Opening range runs from 400/1,600 mm to 550/2,100 mm depending on the model. Arm length is 1,000 mm, arm thickness 30 mm, arm height 350 mm and lost load distance 198 mm. It has two hydraulic functions and rotates 360° in both directions. Arm, chassis and other dimensions can be changed to order; a hydraulic jack and an integral sideshifter valve can be added.
Adana
BNA Tarım ve İş Makineleri
Double-Arm Two-Pad Paper Roll Clamp
Industrial Transport ProductThe double-arm, two-pad paper roll clamp is used for loading and unloading paper rolls and stacking them in the warehouse. ISO 2328 classes 2A, 3A and 4A are listed at 2,000, 3,000, 4,000 and 5,000 kg. Roll diameter ranges from 350 mm minimum to 2,100 mm maximum depending on the model; pad length is 680, 800 or 1,050 mm. It has two hydraulic functions. The short arm is fixed, the long arm moves, and rotation is continuous 360° left and right. The inside of the retainer pads can be covered with rubber, metal or polyurethane; pad dimensions can be made to order. A hydraulic jack valve can be added.
Adana
Services in This Category
Approved supplier service catalogs in this category.
Depota Raf Sistemleri İnş. İth. İhr. San. ve Tic. Ltd. Şti.
Racking Installation
Warehouse Systems ServiceRacking installation covers erecting the manufactured system on site, anchoring it to the floor and handing it over ready for use. Installation follows the layout approved at the design stage. The sequence is site preparation, a parts count after delivery, setting out, upright and beam assembly, floor fixing, and vertical and horizontal checks. Bracing and bolt tightness are reviewed before handover. In a warehouse that stays in operation, installation proceeds zone by zone. For projects in Ankara the crew is in the same city; elsewhere in Turkey, shipment and installation are planned according to project size.
Ankara
Depota Raf Sistemleri İnş. İth. İhr. San. ve Tic. Ltd. Şti.
Racking Design
Warehouse Systems ServiceRacking design determines how the warehouse will be laid out before a purchase decision. The area is measured on site; column spacing, ceiling and beam heights, door and shutter positions and floor condition are recorded. Aisle and bay layout follows product weight and size, how often goods are picked, and whether a forklift, pallet truck or reach truck is used. The plan is drawn, a three-dimensional view can be prepared on request, and production starts after approval. Survey, measurement and the layout plan are free of charge. The service is used for warehouses, archives, production plants, store back rooms and high-ceiling buildings.
Ankara
Depota Raf Sistemleri İnş. İth. İhr. San. ve Tic. Ltd. Şti.
Racking Dismantling and Reinstallation
Warehouse Systems ServiceBolted, modular racking can be dismantled and reinstalled at another address. When a warehouse moves, the existing system is inventoried, parts are grouped and marked during dismantling, and damaged components are set aside. A survey is made for the new warehouse; if the dimensions differ, the layout is redrawn, and the same system may not be rebuilt in exactly the same arrangement in another building. Missing or damaged parts can be remade in the same profile. For businesses changing warehouse, this keeps the investment in the system.
Ankara
Eksen Raf
Racking Installation and Assembly
Warehouse Systems ServiceThe installation crew carries out assembly on site, including intercity projects. Racking systems are delivered across Turkey with installation included. Heavy-duty racks are fixed to the floor with steel anchors; under the occupational safety regulation the top of the rack is also tied to the floor through seismic bracing. The systems are demountable and can be dismantled and reinstalled in another location without compromising the structure. Typical lead time is 2–3 weeks for heavy-duty projects and about 8 weeks for clad rack buildings.
İstanbul
Eksen Raf
Static Calculation and Earthquake Report
Warehouse Systems ServiceMezzanine projects include a load calculation per square metre and a static calculation. For clad rack systems, static calculations, earthquake-code requirements and wind loads are built into the design from the outset. A soil survey is required before installation, and the foundation design follows the soil report. For heavy-duty racking, a seismic calculation and an earthquake report are supplied on request. On clad-rack projects that need a building permit, the required technical documents are prepared.
İstanbul
Eksen Raf
Project-Specific Racking Manufacture
Warehouse Systems ServiceBesides standard sizes, length, depth, height and load capacity are manufactured to the project. On cantilever racks the standard arm length is 60 cm and custom production goes up to 100 cm; the system is built single-sided or double-sided and the level capacity is calculated for the load to be stored. Mezzanine decking can be MDF or steel sheet; the stair, guardrail and platform are included in the project. The site states a minimum mezzanine area of 400 m². All systems are finished with electrostatic powder coating and produced under ISO 9001:2015.
İstanbul
Reta Mühendislik Depo Raf Sistemleri San. ve Tic. A.Ş.
Racking System Engineering
Warehouse Systems ServiceThe engineering team designs storage solutions for each site in line with European Racking Federation (FEM) guidelines and EN standards. Planning is based on EN 15512 structural design of adjustable pallet racking, EN 15620 tolerances and clearances, EN 1993-1-3 cold-formed steel, EN 16681 seismic design, EN 15629 specifications and EN 15635 application and maintenance. Systems compliant with EN 15512 and tested at university are engineered to site dimensions and the product to be stored.
Manisa · Muradiye Organized Industrial Zone
Reta Mühendislik Depo Raf Sistemleri San. ve Tic. A.Ş.
Racking System Manufacturing
Warehouse Systems ServiceRacking systems are formed on roll-form lines in the 20,000 m² enclosed plant in Manisa. Robotic welding, a fully automatic power & free paint shop and integrated quality control are part of manufacture aimed at strength and long service life. ISO 9001 covers design, sales, production, installation and after-sales service. About 45% of production is exported to 41 countries.
Manisa · Muradiye Organized Industrial Zone
Reta Mühendislik Depo Raf Sistemleri San. ve Tic. A.Ş.
Racking System Installation
Warehouse Systems ServiceSince its founding the company has carried out design, manufacturing and installation together with its engineering staff. The ISO 9001 certificate also covers installation and after-sales service. Before installation, site conditions, aisle layout, load capacity and operating flow are assessed. On back-to-back, drive-in and cantilever projects, installation is completed under the same responsibility as engineering and manufacture.
Manisa · Muradiye Organized Industrial Zone
BNA Tarım ve İş Makineleri
Attachment Maintenance and Repair
Industrial Transport ServiceBNA repairs hydraulic and mechanical faults on attachments and carries out maintenance so the attachment keeps its performance. During maintenance or repair the customer is notified by SMS when the unit arrives at the facility. After the work and functional tests are finished, shipment status is also sent by SMS. The steps are arrival at the facility, SMS notice, repair or maintenance, functional testing and shipment notice. The service is carried out at the plant in Seyhan, Adana.
Adana
BNA Tarım ve İş Makineleri
Attachment Spare Parts
Industrial Transport ServiceBNA supplies spare parts so attachments can be used at full performance throughout their service life. Spare-part and quotation requests can be sent to [email protected], by phone on +90 322 262 2 262, or through the quote form on the product pages. After-sales technical support and maintenance are offered to keep product performance. Manufacturing is at the plant in Seyhan, Adana, and the company holds ISO 9001:2009.
Adana
BNA Tarım ve İş Makineleri
Custom Attachment Design and Manufacture
Industrial Transport ServiceWith 25 years of attachment manufacturing experience, BNA designs and builds attachments for the customer’s workflow, the load being handled and the machine. Attachments are made to fit forklift brands that use an ISO fork carriage, in class 2, 3 and 4 carriage sizes. For a special size or design it is enough to state the machine brand, model and capacity. Production is carried out with local resources at the plant in Seyhan, Adana.
Adana
Suppliers in This Category
41 suppliers
For buyers
Get quotes from Logistics & Warehousing suppliers
Browse company profiles below or describe your need to collect multiple quotes in Logistics & Warehousing quickly.
-
Company profiles and certifications
-
Multiple quotes from one RFQ
-
Filter by capability and location
Browse Related Categories
Discover suppliers in adjacent industrial sectors.
General
Cross-industry blog posts and TurkIndustry announcements.
Metal Processing
Turkish manufacturers and suppliers in Metal Processing.
Adhesives & Sealants
Turkish manufacturers and suppliers in Adhesives & Sealants.
Plastics & Rubber
Turkish manufacturers and suppliers in Plastics & Rubber.
Automation & Electronics
Turkish manufacturers and suppliers in Automation & Electronics.
Casting
Turkish manufacturers and suppliers in Casting.
Chemicals
Turkish manufacturers and suppliers in Chemicals.
Sheet Metal
Turkish manufacturers and suppliers in Sheet Metal.
Featured Supplier Profiles
Capability, certification, and export profiles with enough suppliers in this category.
Carbon Steel — Logistics & Warehousing manufacturers
29 listed suppliers
ProcessSerial Production — Logistics & Warehousing manufacturers
27 listed suppliers
IndustryConstruction — Logistics & Warehousing suppliers
24 listed suppliers
CertificationISO 9001 certified Logistics & Warehousing suppliers
23 listed suppliers
CapabilityRacking Systems — Warehouse Systems manufacturers
17 listed suppliers
IndustryAutomotive — Logistics & Warehousing suppliers
16 listed suppliers
IndustryMachinery Manufacturing — Logistics & Warehousing suppliers
16 listed suppliers
Technical standardEN — Logistics & Warehousing manufacturers
16 listed suppliers
IndustryFood — Logistics & Warehousing suppliers
15 listed suppliers
CapabilityWarehouse Shelving — Warehouse Systems manufacturers
14 listed suppliers
ProcessHigh-Volume Production — Logistics & Warehousing manufacturers
14 listed suppliers
MaterialMild Steel — Logistics & Warehousing manufacturers
13 listed suppliers
Featured Product Catalogs
Standard product types with enough suppliers in this category.
Featured Service Catalogs
Standard service types in this category that meet the supplier threshold.
Find the right supplier or list your company
Send RFQs as a buyer or publish your company profile in this category.