Electrical &amp; Power Generation

Hermetically sealed oil-filled distribution transformers are built in a fully closed tank, typically with a gas cushion instead of an open conservator. They tolerate outdoor moisture and contamination better. Common on distribution feeders and industrial supply points. Rating and voltage class follow the project brief.

İstanbul · Tuzla Organized Industrial Zone

MBB Trafo

Oil-Immersed Transformer Manufacturing

Oil-immersed distribution and power transformers use mineral or dielectric oil for cooling the windings. They serve utility feeders, industrial plants and OSB substations. Power rating, voltage ratio and vector group follow the order specification. Tank, radiators and protection gear are selected per application.

İstanbul · Tuzla Organized Industrial Zone

MBB Trafo

Dry Type Transformer Manufacturing

MBB Trafo manufactures dry-type (cast-resin / isolated) distribution transformers. Typical ratings serve LV/MV distribution panels in ventilated or indoor switchgear rooms. Oil-free construction suits sites with stricter fire constraints. Units are built to the buyer’s voltage, power and protection-class specification.

İstanbul · Tuzla Organized Industrial Zone

MBB Trafo

Cast Resin Dry-Type Transformer (5 kVA – 3150 kVA)

MBB Cast Resin Dry-Type Transformers are engineered to deliver maximum safety, energy efficiency, and reliable performance for industrial facilities, commercial buildings, hospitals, data centers, renewable energy plants, and critical infrastructure.The epoxy resin insulated windings provide excellent resistance against moisture, dust, chemicals, and harsh environmental conditions. Their oil-free construction minimizes fire risk while significantly reducing maintenance requirements.Manufactured according to IEC 60076-11, MBB dry-type transformers ensure low losses, high efficiency, and long operational life.Technical SpecificationsPower Rating: 5 kVA – 3150 kVAVoltage Class: Up to 36 kVFrequency: 50 / 60 HzInsulation: Cast ResinCooling: AN / AFProtection Class: IP00 – IP23 (Optional)Low-loss designMaintenance-free operationLow noise levelManufactured according to IEC 60076-11ApplicationsIndustrial PlantsManufacturing FacilitiesData CentersHospitalsShopping MallsHotelsMetro & Railway SystemsWind Power PlantsSolar Power PlantsPublic BuildingsCommercial ComplexesHigh-Rise Buildings

İstanbul · Tuzla Organized Industrial Zone

MBB Trafo

Hermetically Sealed Oil-Immersed Distribution Transformer

Power Distribution Equipment Product

MBB Hermetically Sealed Oil-Immersed Distribution Transformers are manufactured in accordance with international standards to deliver high energy efficiency, long service life, and reliable performance.The hermetically sealed tank prevents the insulating oil from contacting ambient air, minimizing moisture ingress and extending transformer lifetime while reducing maintenance requirements. These transformers are ideal for industrial plants, power distribution networks, commercial buildings, infrastructure projects, and renewable energy applications.FeaturesPower ratings from 50 kVA to 5000 kVAOperating voltage up to 36 kVLow-loss, high-efficiency designMaintenance-free hermetically sealed constructionManufactured in accordance with IEC 60076High short-circuit withstand capabilityReliable, long-lasting performance for demanding applications

İstanbul · Tuzla Organized Industrial Zone

EAE Elektrik A.Ş.

E-Line KX Compact Busbar

E-Line KX Series Compact Busbar Systems are used in horizontal and vertical energy distribution and transmission in Bolt-on (supply from the junctures) and Plug-in (from window points on the busbar housing and the junctures) types. They provide energy transmission and distribution at 400A–6300A with tin-plated aluminium or copper busbar conductors. The housing is extruded aluminium, RAL 7038 electrostatic painted; conductors are insulated with Class B polyester film and epoxy coating. Protection degree is IP55 standard and IP65/67 optional. KXB tap-off boxes are 160/250/400/630/800 and 1000A bolt-on; KXP tap-off boxes are 160–630A plug-in.

İstanbul

EAE Elektrik A.Ş.

E-Line CCR Cast Resin Busbar

Power Distribution Equipment Product

E-Line CCR is an aluminium-housed cast resin busbar system rated 600A–6300A. It is used to carry high currents on transformer-to-switchboard connections, rising mains and factory power distribution, and in outdoor, gallery, chemical plant, harbour and tunnel applications. Aluminium housing covers the DUROCOMP composite made from specially selected pure silicon minerals and epoxy resin, insulating the busbar from external elements. It complies with IEC 61439-6, offers outdoor IP68 protection, is corrosion- and chemical-resistant, and is compatible with E-Line KX modules.

İstanbul

STD Transformatör Makine Teknoloji İnşaat Dış Ticaret ve Sanayi Ltd. Şti.

Oil-Immersed Medium Power Transformers

STD Power Transformers are individually designed and manufactured to meet the highest industry standards. We have the capacity to manufacture power transformers up to 50 MVA and 110 kV. Capacity is planned to reach 250 MVA and 220 kV at the new factory by end of 2026.

Adana · Adana Haci Sabanci Organized Industrial Zone

STD Transformatör Makine Teknoloji İnşaat Dış Ticaret ve Sanayi Ltd. Şti.

Transformers for Solar Power Plants

Transformers specially produced for PV and other renewable energy projects. In PV projects of 4 MVA and above, rectifier (dual-secondary) transformers may be required. Designs include electrostatic shielding between primary and secondary windings; models resistant to high THD and harmonics can also be produced.

Adana · Adana Haci Sabanci Organized Industrial Zone

STD Transformatör Makine Teknoloji İnşaat Dış Ticaret ve Sanayi Ltd. Şti.

Oil-Immersed Hermetic Transformers

Hermetic oil distribution transformers from 25–5000 kVA, up to 36 kV, three-phase, naturally or fan cooled, with OLTC. Vacuum oil filling prevents contact with atmosphere; used in residential, industrial, EV charging and renewable energy applications.

Adana · Adana Haci Sabanci Organized Industrial Zone

Services in This Category

Approved supplier service catalogs in this category.

Service type: 84 services

MBB Trafo

Custom Winding and Coil Work

Custom winding and coil work covers transformer rewind, enamelled-wire coil manufacture and repair. Failed or end-of-life units can be assessed for winding replacement. Power, voltage and insulation class follow the existing core or a new design. Workshop-based special manufacturing and overhaul.

İstanbul · Tuzla Organized Industrial Zone

MBB Trafo

Transformer Buy and Sell

Buy-and-sell service for new and used distribution/power transformers. Buyer needs are filtered by power, voltage and type (dry, oil, hermetic). Seller stock or dismantling sources are assessed. Supports fast spare cover and plant or grid renewal projects.

İstanbul · Tuzla Organized Industrial Zone

MBB Trafo

Custom Transformer Manufacturing

MBB Trafo builds custom power and distribution transformers to the buyer specification. Voltage ratio, vector group, impedance, protection class and mechanical envelope are set per project. Dry-type, oil-immersed or hermetic designs can be selected. Aimed at OEM and special-build needs.

İstanbul · Tuzla Organized Industrial Zone

STD Transformatör Makine Teknoloji İnşaat Dış Ticaret ve Sanayi Ltd. Şti.

24/7 Emergency Response

Immediate response to faults at facilities; intervention within at most 1 day. Fast resolution is targeted for all test and commissioning work.

Adana · Adana Haci Sabanci Organized Industrial Zone

STD Transformatör Makine Teknoloji İnşaat Dış Ticaret ve Sanayi Ltd. Şti.

Transformer Maintenance Service

Average transformer service life is 20–30 years; with 6-month or annual maintenance it can exceed 40 years. Periodic maintenance is provided with advanced test equipment and expert staff.

Adana · Adana Haci Sabanci Organized Industrial Zone

STD Transformatör Makine Teknoloji İnşaat Dış Ticaret ve Sanayi Ltd. Şti.

Transformer Assembly and Disassembly

Electrical Components Service

Mechanical assembly, vacuuming, oil treatment, electrical and chemical tests of power and distribution transformers are performed by expert staff, including field tests and commissioning. Service is provided on-site or in-plant with mobile maintenance team and specialized vehicles.

Adana · Adana Haci Sabanci Organized Industrial Zone

Akiş Plastik

Export Supply

Products reach partners in more than 65 countries. Trust, transparency, sustainable supply, competitive price and fast delivery are stressed for the export-oriented company. Middle East, Europe, Africa, Asia and South America are named.

İstanbul · Ikitelli Organized Industrial Zone

Akiş Plastik

Electrical-Parts Manufacturing

Electrical Enclosures Service

Since 2012 electrical materials have been made in plants equipped with modern technology to national and international standards. 6,000 m² enclosed area is the scale. Investment in quality control and technical staff is stated.

İstanbul · Ikitelli Organized Industrial Zone

Pelsan Aydınlatma

Accredited Lighting Laboratory Testing

The laboratory was established in 1997 in 550 m² and accredited by TÜRKAK to TS EN ISO/IEC 17025 on 28 April 2015. Tests include TS EN 60598-1/2 luminaire tests, TS EN 13032-1/2 photometry, TS EN 62031 LED-module safety, TS 3033 EN 60529 IP, TS EN 60695 fire hazard, TS EN 60112 tracking, TS EN 62262 IK and TS EN 60068 environmental tests.

İstanbul · Dudullu Organized Industrial Zone

Pelsan Aydınlatma

Luminaire Manufacturing

More than 5 million luminaires a year are produced by more than 500 employees in 30,000 m² indoor area. Lines include electronics, plastic injection, semi-finished processing, a tool room, glass processing and park-and-garden luminaires. In 2017 the company moved to a fully integrated new factory. ISO 9001 has been applied since 1997.

İstanbul · Dudullu Organized Industrial Zone

İsm Makine Elektrik San. ve Tic. A.Ş.

Peltier Cooling Development

The Peltier series was developed in 2011 as an eco-friendly 0 dB minibar. Energy use is lower than absorption. The ISMART Design Centre opened in 2019 and received ministry design-centre approval in 2020. Development follows the hotel energy target.

Mani̇sa · Manisa Organized Industrial Zone

İsm Makine Elektrik San. ve Tic. A.Ş.

Minibar Manufacturing