Is this the automation category?
No. Automation systems cover controls, PLCs and sensors. This page is electrical equipment. A project can need both.
Industrial category
Turkish manufacturers and suppliers in Electrical Equipment.
Read the buyer guide
Delta Regülatör
Single- and three-phase servo motor voltage regulators offering ±1% output accuracy across the MAXX and DLT SRV series. DLT SRV 11 (1–50 kVA single-phase), DLT SRV 33 LO (15–150 kVA) and DLT SRV 33 HI (200–4,000 kVA) regulate via autotransformer (variac) and booster transformer with continuous correction. Manual bypass, overload and short-circuit protection for banking, healthcare, automotive and public-sector loads.
İstanbul
Delta Regülatör
Electronic static regulators with no moving parts; thyristor/relay stages respond in under 20 ms. DLT STK 11 (5–1000 kVA single-phase) provides ±2% output regulation at 500 V/s correction; DLT STK 33 (15–4,000 kVA three-phase) covers industrial capacity with wide input tolerance. MCU relay series (0.5–5 kVA) protects home and small-office loads; preferred for telecom, retail and control-panel applications.
İstanbul
Delta Regülatör
Online double-conversion UPS systems; DS-300T (10–500 kVA) with DSP-controlled IGBT switching delivers 0 ms transfer and clean sine-wave output. Superior and Superior DSP (10–160 kVA) reach up to 96% efficiency with N+1 parallel redundancy; Crystal and Premium single-phase plus DLT-100/DLT 300 transformer-based models provide galvanic isolation. Used in banks, data centers, hospitals and telecom with scalable battery backup.
İstanbul
Polatsan Engelli Araçları İmalat Sanayi
IP64 protected mobile charging station suitable for all battery-powered mobility vehicles. The 1.5 mm galvanised sheet body is protected against corrosion with electrostatic powder coating and is suitable for outdoor use. With 2 x 27 VDC 8 Ah charging units it charges 2 vehicles at once; the chargers operate between -15°C and +50°C. It runs on 220 V AC 50 Hz mains and has three-pin international standard sockets. The unit is fully earthed with 2x25 A 30 mA residual current, overcurrent and short-circuit protection, and each socket has a display and LED charge indicator.
Sakarya
Delta Regülatör
Fault diagnosis, maintenance and spare-parts support for servo regulators, static stabilizers and UPS products. Submit model, serial number and fault description via the service request form; warranty coverage is verified and the process starts. On-site intervention for critical sites and large-capacity systems; paid service and spare-parts quotes for out-of-warranty units. Hours Monday–Friday 08:00–17:00.
İstanbul
Delta Regülatör
We size the right regulator or UPS configuration from load power (kW/kVA), supply voltage, phase count and backup time. Outside standard families, our technical team works one-to-one on power distribution panels, site transformers and custom engineering. The power calculator shows approximate capacity; project quotes needing special engineering may take a few days once scope is clear.
İstanbul
Delta Regülatör
On request we perform site surveys for large or critical facilities and support installation and commissioning with our technical team. Every unit is load-tested under real conditions before shipment; domestic field teams and overseas partners provide continuous support. Post-installation maintenance planning is set by site location and fault priority.
İstanbul
Malatya Makina Sanayii A.Ş. (maksan)
MAKSAN provides 24/7 maintenance and service with specialist teams so transformers keep factory performance over a long life. Users are advised to check terminal tightness, clean cooling surfaces, and verify oil level/colour plus Buchholz and contact-thermometer functions at least every six months on conservator units; yearly silica-gel renewal and oil breakdown-voltage plus power-factor tests are recommended. On-site work covers non-factory repairs; loss of hermetic seal, tap-changer faults and LV/HV winding damage are repaired in the plant.
Malatya
Polatsan Engelli Araçları İmalat Sanayi
Installation and technical service are provided across Türkiye so that the disabled mobility vehicle charging stations manufactured and installed by POLATsan operate without interruption. Stations delivered to municipalities, hospitals, ministries and institutions such as Istanbul Airport are installed and put into service. The stations come with a 2-year warranty against manufacturing defects and a 10-year spare parts warranty.
Sakarya
Delta Proses Otomasyon
We act as the single responsible contractor at every stage, from design to field installation and from FAT/SAT testing to operator training. Scope covers electrical design, MV/LV distribution, transformer and switchyard connections, panel manufacturing, field instrumentation and cabling, PLC/DCS/SCADA software and commissioning. Projects in this scope were completed at SANKO Enerji, GreenECO, Maren Enerji and Türkerler geothermal power plants.
İzmir · Ataturk Organized Industrial Zone
Approved supplier product catalogs in this category.
Delta Regülatör
Single- and three-phase servo motor voltage regulators offering ±1% output accuracy across the MAXX and DLT SRV series. DLT SRV 11 (1–50 kVA single-phase), DLT SRV 33 LO (15–150 kVA) and DLT SRV 33 HI (200–4,000 kVA) regulate via autotransformer (variac) and booster transformer with continuous correction. Manual bypass, overload and short-circuit protection for banking, healthcare, automotive and public-sector loads.
İstanbul
Delta Regülatör
Electronic static regulators with no moving parts; thyristor/relay stages respond in under 20 ms. DLT STK 11 (5–1000 kVA single-phase) provides ±2% output regulation at 500 V/s correction; DLT STK 33 (15–4,000 kVA three-phase) covers industrial capacity with wide input tolerance. MCU relay series (0.5–5 kVA) protects home and small-office loads; preferred for telecom, retail and control-panel applications.
İstanbul
Delta Regülatör
Online double-conversion UPS systems; DS-300T (10–500 kVA) with DSP-controlled IGBT switching delivers 0 ms transfer and clean sine-wave output. Superior and Superior DSP (10–160 kVA) reach up to 96% efficiency with N+1 parallel redundancy; Crystal and Premium single-phase plus DLT-100/DLT 300 transformer-based models provide galvanic isolation. Used in banks, data centers, hospitals and telecom with scalable battery backup.
İstanbul
Polatsan Engelli Araçları İmalat Sanayi
IP64 protected mobile charging station suitable for all battery-powered mobility vehicles. The 1.5 mm galvanised sheet body is protected against corrosion with electrostatic powder coating and is suitable for outdoor use. With 2 x 27 VDC 8 Ah charging units it charges 2 vehicles at once; the chargers operate between -15°C and +50°C. It runs on 220 V AC 50 Hz mains and has three-pin international standard sockets. The unit is fully earthed with 2x25 A 30 mA residual current, overcurrent and short-circuit protection, and each socket has a display and LED charge indicator.
Sakarya
Polatsan Engelli Araçları İmalat Sanayi
Monitor-equipped charging station suitable for all battery-powered mobility vehicles, IP64 protected, charging 2 vehicles at the same time. It has an EN/VDE certified pull-and-release spring cable reel, a waterproof-lidded USB socket for phones and tablets, and a dust-filtered ventilation and cooling fan. A 21.5-inch screen behind 8 mm tempered glass runs advertising and information content from a mini PC; each socket has a 1.7-inch TFT display showing charging current, battery voltage and charge level. It does not charge on reversed battery connection and charges according to battery state without damaging it. 2-year manufacturing warranty, 10-year spare parts warranty.
Sakarya
Polatsan Engelli Araçları İmalat Sanayi
Second model of the Lüks series: a monitor-equipped charging station suitable for all battery-powered mobility vehicles. It is IP64 protected and charges 2 vehicles at the same time. A 21.5-inch screen shows advertisements, notices and information, protected by waterproof and dustproof 8 mm tempered glass. It has dedicated software, timer-based energy saving for the monitor and lighting, and resumes content after a power cut. It starts charging when a battery is detected and does not charge on reversed connection. 2-year warranty, 10-year spare parts.
Sakarya
Delta Proses Otomasyon
Withdrawable and fixed-type motor control centres (MCC) are manufactured in our own workshop under the Siemens Sivacon S4 and S8 technology partnership held since 2019, in accordance with Siemens' type-tested system design. Designs follow IEC 61439-1 and IEC 60529; where requested, a minimum IP41 protection class and an RAL 7035 epoxy-polyester painted galvanised sheet enclosure are provided. Panels undergo a function test before delivery.
İzmir · Ataturk Organized Industrial Zone
Uğur Karbon San. ve Tic. Ltd. Şti.
UMV medium voltage slip-rings are used in systems that need to transmit low current at high voltage; higher voltage allows thinner cable sections and lower cable cost. Models rated 6000 V and 12000 V, with 4 or 7 contacts and 240 mm or 340 mm bronze diameters, are used in ports, iron and steel plants, cement plants and cable drums.
İstanbul · Ikitelli Organized Industrial Zone
Emtaş - Elsan Elektrik San. ve Tic. A.Ş.
Industrial asynchronous electric motor in frame sizes 90-355, rated 0.55-400 kW with 2-4-6-8-10-12-16 poles. Cast iron frame and end shields with ductile iron feet; IP55 (up to frame 280) / IP65 (frame 315 and above) protection, IC 411 cooling, F/H insulation, S1 duty and 400 V 50 Hz supply. Special motors can be built by adding brake, encoder or forced cooling depending on the application; frames above 250 come with thermistor and motor protection relay.
Ankara
Emtaş - Elsan Elektrik San. ve Tic. A.Ş.
Vibration motor in frame sizes 80-200, rated 0.20-15 kW with 2-4-6-10 poles. Frame, end shields and feet are ductile iron; IP55 protection, IC 410 (non-ventilated) cooling, class F insulation, S1 duty and 380 V 50 Hz supply in foot-mounted construction. Careful design, robust build and strict quality control provide reliable, long-life operation; frames 132 and above include thermistor and motor protection relay.
Ankara
Emtaş - Elsan Elektrik San. ve Tic. A.Ş.
Deep well pump motor in frame sizes 100-315, rated 3-370 kW with 2 and 4 poles. Steel frame with cast iron end shields and internal cooling; IP23 protection (IP55 on request), F/H insulation, S1 duty and 380 V 50 Hz supply (500 V and 60 Hz on request). Designed to run continuously for long periods with minimal maintenance under harsh operating conditions; protected by thermistor and motor protection relay.
Ankara
Aktif Elektroteknik A.Ş.
Aktif-brand transformer/distribution substations are manufactured as fixed or mobile units in accordance with IEC standards and relevant specifications. The range comprises mobile transformer substations, compact transformer substations (E-House) and concrete kiosks. Factory-built kiosks are a practical, cost-effective alternative to building-type structures, while mobile stations are designed for emergencies, remote areas and temporary energy needs.
İstanbul
Approved supplier service catalogs in this category.
Delta Regülatör
Fault diagnosis, maintenance and spare-parts support for servo regulators, static stabilizers and UPS products. Submit model, serial number and fault description via the service request form; warranty coverage is verified and the process starts. On-site intervention for critical sites and large-capacity systems; paid service and spare-parts quotes for out-of-warranty units. Hours Monday–Friday 08:00–17:00.
İstanbul
Delta Regülatör
We size the right regulator or UPS configuration from load power (kW/kVA), supply voltage, phase count and backup time. Outside standard families, our technical team works one-to-one on power distribution panels, site transformers and custom engineering. The power calculator shows approximate capacity; project quotes needing special engineering may take a few days once scope is clear.
İstanbul
Delta Regülatör
On request we perform site surveys for large or critical facilities and support installation and commissioning with our technical team. Every unit is load-tested under real conditions before shipment; domestic field teams and overseas partners provide continuous support. Post-installation maintenance planning is set by site location and fault priority.
İstanbul
Malatya Makina Sanayii A.Ş. (maksan)
MAKSAN provides 24/7 maintenance and service with specialist teams so transformers keep factory performance over a long life. Users are advised to check terminal tightness, clean cooling surfaces, and verify oil level/colour plus Buchholz and contact-thermometer functions at least every six months on conservator units; yearly silica-gel renewal and oil breakdown-voltage plus power-factor tests are recommended. On-site work covers non-factory repairs; loss of hermetic seal, tap-changer faults and LV/HV winding damage are repaired in the plant.
Malatya
Polatsan Engelli Araçları İmalat Sanayi
Installation and technical service are provided across Türkiye so that the disabled mobility vehicle charging stations manufactured and installed by POLATsan operate without interruption. Stations delivered to municipalities, hospitals, ministries and institutions such as Istanbul Airport are installed and put into service. The stations come with a 2-year warranty against manufacturing defects and a 10-year spare parts warranty.
Sakarya
Delta Proses Otomasyon
We act as the single responsible contractor at every stage, from design to field installation and from FAT/SAT testing to operator training. Scope covers electrical design, MV/LV distribution, transformer and switchyard connections, panel manufacturing, field instrumentation and cabling, PLC/DCS/SCADA software and commissioning. Projects in this scope were completed at SANKO Enerji, GreenECO, Maren Enerji and Türkerler geothermal power plants.
İzmir · Ataturk Organized Industrial Zone
Hersek Tersanecilik San. Tic. A.Ş.
Production of warning spheres for air traffic safety on high-voltage and power transmission lines using SMC and prepreg systems. RAL 2002 orange pigment is impregnated into the material for UV resistance; the vinyl-ester body offers flexural strength up to 310 MPa. Stable from -30 °C to +55 °C, ASTM D4956-09 Type 11 reflectors, neoprene clamp mounting for OPGW and standard conductors.
Kocaeli
Emtaş - Elsan Elektrik San. ve Tic. A.Ş.
Special purpose electric motors are designed and manufactured to customer needs; special motors can be produced by adding equipment such as brakes, encoders or forced cooling to standard motors depending on the application. Engineers and designers in the Design Development Unit prioritise customer requirements to develop stronger, more durable, lower cost and more efficient asynchronous electric motors.
Ankara
Emtaş - Elsan Elektrik San. ve Tic. A.Ş.
Solution-oriented, fast and reliable technical support is provided for EMTAŞ motors. Through the Technical Support Form, customers can open a record for faulty products and request information; after-sales services are delivered through the domestic dealer and service network. A motor selection tool and product-level operating, technical drawing and use-maintenance documents are provided on the website.
Ankara
Gersan Elektrik Ticaret ve Sanayi A.Ş.
The Gersan Construction and Contracting group delivers turnkey projects. The group completed the Tbilisi Golden Tulip Hotel (78 rooms, 7,500 m², 2017-2019) and the Tbilisi American Hospital (23,000 m², 2018-2020) on a turnkey basis and continued its work on the 200-room Radisson Tbilisi City Center project. It covers project-based installation of electrical infrastructure in buildings such as hotels and hospitals.
İstanbul · Istanbul Anadolu Yakasi Organized Industrial Zone
Kondaş Kondansatör Sanayi ve Ticaret A.Ş.
Automatic compensation bank projects for networks up to 36 kV, double-star connected with unbalance detection protection. Bank rating is set by installed power and the number of steps by load fluctuation. Supplied with IP23 aluminium or steel construction, 6–24 capacitor units, current limiting reactors, HRC fuses, vacuum contactors or SF6 breakers and a reactive power control relay.
Kocaeli
Entes Elektronik Cihazlar İmalat ve Ticaret A.Ş.
ENTES carries out OEM production for leading companies worldwide in its 12,000 m² covered production facilities equipped with advanced manufacturing technologies. It has an SMD assembly capacity of 30,000 components/hour and an annual production capacity of 2,000,000 devices. Quality assessments according to international standards are carried out at design, incoming material, production and product output levels.
İstanbul · Dudullu Organized Industrial Zone
113 suppliers
Electrical equipment on this page means industrial electrical products: enclosures, panels, distribution equipment, components and related assemblies. It is not a consumer-electronics shop and it is not the automation-systems page, although a panel builder and a controls company can be neighbors in a real project.
Buyers should name the voltage, the current, the installation environment and the standard they design to. A metal box is not a tested switchboard. A cable supplier is not a transformer plant. Cables and connectors, transformers and automation systems are separate categories for that reason. Use this page to find companies that present electrical equipment, then read whether they build, assemble or distribute. TurkIndustry does not certify compliance with a wiring standard and does not claim a short-circuit rating for the category.
The category covers electrical equipment and the companies that make or assemble it for industrial use. Enclosures, boards and components can all appear. Power distribution equipment and transformers have their own pages when that is the specific product. Environmental sealing, IP duty and the applicable standard are specification items, not category guarantees.
Match the product type before the city. Then ask what is manufactured versus assembled from bought-in devices. A local panel shop can be the right partner for one board and the wrong partner for a medium-voltage product.
State the voltage, current, environment, applicable standard and whether you need a component, an enclosure or a built assembly. Send a single-line or general arrangement if you have one. A request that only says “electrical panel” is too open to quote.
No. Automation systems cover controls, PLCs and sensors. This page is electrical equipment. A project can need both.
Transformers have their own category. Open that page when the product is a transformer rather than general equipment.
Not automatically. Name the standard in the request and ask the supplier what they will declare.
Ask. Some companies sell standard boxes and others build to a drawing. Quantity and size belong in the request.
For buyers
Browse company profiles below or describe your need to collect multiple quotes in Electrical Equipment quickly.
Company profiles and certifications
Multiple quotes from one RFQ
Filter by capability and location
Discover suppliers in adjacent industrial sectors.
Turkish manufacturers and suppliers in Generators.
Turkish manufacturers and suppliers in Batteries.
Turkish manufacturers and suppliers in Fuel Cells.
Turkish manufacturers and suppliers in Transformers.
Turkish manufacturers and suppliers in Electrical Components.
Turkish manufacturers and suppliers in Power Distribution Equipment.
Turkish manufacturers and suppliers in Power Plants.
Turkish manufacturers and suppliers in Electrical Enclosures.
Capability, certification, and export profiles with enough suppliers in this category.
94 listed suppliers
Process87 listed suppliers
Industry85 listed suppliers
Technical standard81 listed suppliers
Material66 listed suppliers
Process64 listed suppliers
Industry60 listed suppliers
Material57 listed suppliers
Industry57 listed suppliers
Certification54 listed suppliers
Export49 listed suppliers
Certification46 listed suppliers
Standard product types with enough suppliers in this category.
Standard service types in this category that meet the supplier threshold.
Send RFQs as a buyer or publish your company profile in this category.
Explore Turkish manufacturers and industrial suppliers on TurkIndustry. Discover potential sourcing partners, submit RFQs and compare quotations — all from one platform.