Casting

TTT-casting was established to meet TTT-auto’s casting need; parts are produced to cover the technical features of the originals. TTT-auto manufactures brake-caliper repair kits for heavy-duty vehicles. Castings are 1–50 kg ductile and grey iron at 1,800 t/year.

Konya · Konya Organized Industrial Zone

TTT Casting

Grey Iron Castings

Grey-iron parts of 1–50 kg are produced with ductile iron in TTT-casting’s range. A jacketed automatic moulding line of 600×700 mm at 60 moulds/hour and an 18 t/h sand plant are used. The foundry was set up in 2022 under the same roof to supply TTT-auto.

Konya · Konya Organized Industrial Zone

TTT Casting

Ductile Iron Castings (1–50 kg)

TTT-casting produces ductile-iron and grey-iron parts from 1 kg to 50 kg on 3,500 m² indoor area. Annual capacity is 1,800 tonnes. From incoming material to the finished part, pattern design, casting simulation, sand tests, spectral analysis and metallographic and mechanical tests are applied.

Konya · Konya Organized Industrial Zone

Foundry An

Steel Castings

Steel Casting Product

Foundry An produces steel castings with grey and ductile iron by green sand and resin sand moulding. Steel casting is used where strength and wear resistance are required in automotive, mechanical engineering and construction. Parts can be finished on in-house CNC machines; the foundry is ISO 9001 certified.

Konya

Foundry An

Grey Iron Castings (EN-GJL)

Grey iron castings (EN-GJL grades) are produced by green sand and resin sand moulding. EN-GJL (formerly GG) is characterised by vibration damping and machinability for complex geometries needing dimensional accuracy. Parts can be delivered raw, primed or CNC machined, with ISO 9001 laboratory checks.

Konya

Foundry An

Ductile Iron Castings (EN-GJS)

EN-GJS (formerly GGG) ductile iron is produced by green and resin sand moulding; it offers ductility, strength and impact resistance for critical mechanical and structural parts. Castings are exported from the Konya foundry to Europe. Chemical analysis, mechanical testing and NDT are applied batch by batch.

Konya

Morçelik Çelik Döküm

Steel Castings

Steel Casting Product

Steel castings are produced with grey and ductile iron within the 11,000 t/year capacity. Melts of up to 10 tonnes serve sectors from iron and steel to wind energy. The seven-step SolidWorks-to-inspection process runs under ISO 9001, 14001 and 45001.

Konya · Büyükkayacık Organized Industrial Zone

Morçelik Çelik Döküm

Ductile Iron Castings

Ductile-iron castings are one of Morçelik’s main product groups with grey iron and steel. Output is 11,000 t/year from Konya 3rd OIZ with up to 10-tonne melts and more than 40 years of foundry experience. The plant holds ISO 9001, ISO 14001 and ISO 45001 and runs a seven-step process.

Konya · Büyükkayacık Organized Industrial Zone

Morçelik Çelik Döküm

Grey Iron Castings

Morçelik produces grey-iron castings as part of 11,000 t/year of iron and steel output in the 7,000 m² Konya 3rd OIZ plant. Melting is up to 10 tonnes per heat with high-rate pouring. Parts follow a SolidWorks drawing through modelling, sand preparation, melting, moulding, cleaning/grinding and quality control.

Konya · Büyükkayacık Organized Industrial Zone

Komet Metal Aksesuar San. ve Tic. A.Ş.

Zamak Plates and Rivets

Die Cast Component

Plate and rivet types in the zamak group are published on separate product pages. Zamak is a zinc alloy of zinc, aluminium, magnesium and copper; special production is available to customer demand. The home page states that products are put through tests at regular intervals and after-sales support is given. Seasonal collection work is done at the 7,000 m² integrated plant.

İstanbul · Beylikduzu Organized Industrial Zone

Komet Metal Aksesuar San. ve Tic. A.Ş.

Zamak Group Accessories

Die Cast Component

Zamak is a zinc alloy product consisting of zinc, aluminium, magnesium and copper. In our factory, special zamak accessories can be produced by customer demands. In our Zamak group there are rivet, plate, cordend and button types. The home page publishes a monthly average capacity of 50 million pieces and a 7,000 m² fully integrated plant.

İstanbul · Beylikduzu Organized Industrial Zone

Endosa Kalıp İthalat İhracat San. ve Tic. A.Ş.

Aluminium Injection Cast Part

Die Cast Component

The high-pressure aluminium casting page states parts from 50 grams to 12 kilograms are produced on 100–1000 ton injection presses. Melting lists a 2,500 kg tower gas furnace, 800 kg tilting furnaces and electric holding furnaces. Processes are managed under IATF 16949:2016, APQP and PPAP. Parts are made for automotive, white goods and electronics.

Mani̇sa · Muradiye Organized Industrial Zone

Services in This Category

Approved supplier service catalogs in this category.

Service type: 54 services

TTT Casting

Induction Melting

Melting is on induction furnaces of 2×1 t/h. Annual casting capacity is 1,800 tonnes. A 90,000 m³/h filter system ventilates furnaces and the shop. Piece weight is 1–50 kg in ductile and grey iron.

Konya · Konya Organized Industrial Zone

TTT Casting

Spectral and Metallographic Testing

Pre-pour spectral analysis of the melt and post-cast metallographic and mechanical tests are applied. Pattern design, casting simulation and moulding-sand tests are also part of the process. The aim is that products cover all technical features of the original parts.

Konya · Konya Organized Industrial Zone

Foundry An

European Casting Export

From the Konya foundry, machined and unmachined castings are regularly exported to industrial customers in Germany, France, Italy and other EU markets, with export documentation and logistics. The group is an export company (An Dış Ticaret) plus two ISO 9001 foundries. Grey iron, ductile iron and steel have been supplied since 1990.

Konya

Morçelik Çelik Döküm

Heavy Melt Casting

With melts of up to 10 tonnes and high-rate pouring, Morçelik produces large grey-iron, ductile-iron and steel castings. Annual capacity is 11,000 tonnes in a 7,000 m² indoor plant. Sectors from iron and steel to wind energy are served with more than 40 years of foundry experience.

Konya · Büyükkayacık Organized Industrial Zone

Morçelik Çelik Döküm

Casting Cleaning and Grinding

Cleaning and grinding is one of Morçelik’s seven process steps, followed by quality control. The chain starts from a SolidWorks drawing and includes modelling, sand preparation, melting and moulding. ISO 9001, 14001 and 45001 support dimensional and quality standards at each stage.

Konya · Büyükkayacık Organized Industrial Zone

Komet Metal Aksesuar San. ve Tic. A.Ş.

Custom Zamak Die-Cast Accessory Production

The zamak group page states that special zamak accessories can be produced in the factory according to customer demands. The group includes rivet, plate, cordend and button types. The home page states a monthly average capacity of 50 million pieces and a 7,000 m² fully integrated plant. The company records that it is the first metal accessory factory with STeP by OEKO-TEX.

İstanbul · Beylikduzu Organized Industrial Zone

Çuhadaroğlu

Custom Extrusion and Casting

The die shop and foundry make project profiles and cast parts. The R&D centre designs new systems. Industrial profile orders are taken alongside architectural lines Orders and shipments are handled from the Beylikdüzü OSB (Istanbul) plant; technical sizes and materials are confirmed against the customer specification.

İstanbul · Beylikduzu Organized Industrial Zone

Endosa Kalıp İthalat İhracat San. ve Tic. A.Ş.

High-Pressure Aluminium Casting

The service page states 50 g–12 kg parts are produced on 100–1000 ton presses; the park includes Bühler, HAITIAN, LK, IDRA, Erapres and HidroTeknik, with automatic degassing. Yaskawa and KUKA robots take parts; trim presses are 20–30 tons. Metal prep includes a 2,500 kg tower furnace and electric holders. IATF 16949, APQP and PPAP apply.

Mani̇sa · Muradiye Organized Industrial Zone

Elit Jant San. ve Tic. A.Ş.

Wheel Painting

Painting sits on the Elit Wheels process list before quality testing, after machining. BMP, PLP, BLP, CSP and CS finishes appear on model cards. The Manisa OSB paint line finishes 13–20 inch wheels in these coatings. Colour code follows the ordered finish family.

Mani̇sa · Manisa Organized Industrial Zone

Elit Jant San. ve Tic. A.Ş.

Wheel Machining

Machining follows foundry and X-ray on the Elit Wheels process list. It is part of more than 30 production processes. The Manisa plant CNC-machines the wheel to E.T.R.T.O. dimensions. Stock and overlap are programmed to the wheel drawing.

Mani̇sa · Manisa Organized Industrial Zone

Elit Jant San. ve Tic. A.Ş.

Low-Pressure Wheel Casting

Wheels are produced on computer-controlled low-pressure casting machines using special aluminium alloys. E.T.R.T.O. conformity is stated in the corporate text. The 14,000 m² Manisa OSB plant does this casting as the first of more than 30 processes. Die and alloy follow the wheel model.

Mani̇sa · Manisa Organized Industrial Zone

İstikamet Döküm

CNC Machining of Castings