Industrial category
Iron Casting
Specialist companies in Iron Casting.
Popular products
Rolmak Döküm Sanayi ve Limited Şirketi
Rod-Coil Rolling Mill Rolls
Iron Casting ProductCasting rolls used for rod and coil rolling mills, known as spherical (sphero) rolls in the industry, are classified as ferritic, perlitic and acicular. These rolls contain high alloys and can be used on all rolling steps, from preparation groups to finishing stands. Spherical graphite in the microstructure gives high breaking strength and blocks internal microcracks; high thermal conductivity dampens thermal stresses and delays thermal cracking. For rod-coil mills, preparation uses RDP 47-32 and RDP 57-41; middle group RDP 57-41 and RDP 65-47; post-finish RDP 67-48, RDAC 67-48 and RDAC 76-53; finish RDP 67-48, RDP 70-50, RDAC 74-52 and RDAC 83-57. The rolling mill layout may vary according to working conditions and the products to be drawn.
Karabük · Karabuk Organized Industrial Zone
Rolmak Döküm Sanayi ve Limited Şirketi
Angle-Profile Rolling Mill Rolls
Iron Casting ProductSphero rolls for angle and profile rolling mills have high tensile strength and thermal conductivity because of the spherical graphite they contain. They take their mechanical strength from the spherical graphite in their metallographic structure. After heat treatment these microstructures are suited to preparation, middle and finish groups. For angle-profile mills, preparation uses RDP 47-32 and RDP 57-41; middle group RDP 57-41 and RDP 67-48; post-finish RDP 67-48, RDAC 67-48 and RDAC 70-50; finish RDP 67-48, RDP 70-50, RDAC 70-50 and RDAC 76-53. The rolling mill layout may vary according to working conditions and the products to be drawn.
Karabük · Karabuk Organized Industrial Zone
Rolmak Döküm Sanayi ve Limited Şirketi
Rolling Mill Rings and Straightening Balls
Iron Casting ProductRings are used in middle-group and finish lines as a price-performance product; when used under suitable conditions, the increase in product amount per pass is significant. Before packaging, the straightening process removes linearity problems of the finished product. Rolmak produces straightening balls in hardness and microstructures prepared by its experienced teams so that maximum efficiency can be obtained. Rings and straightening balls are molded, cast, heat-treated and machined at the Karabük plant before shipment.
Karabük · Karabuk Organized Industrial Zone
TTT Casting
Automotive Supplier Castings
Iron Casting ProductTTT-casting was established to meet TTT-auto’s casting need; parts are produced to cover the technical features of the originals. TTT-auto manufactures brake-caliper repair kits for heavy-duty vehicles. Castings are 1–50 kg ductile and grey iron at 1,800 t/year.
Konya · Konya Organized Industrial Zone
Popular services
Aspar Asansör Aksamları Pazarlama San. Tic. A.Ş.
Foundry Manufacturing
Iron Casting ServiceIn a 2019 news item ASPAR announced that its foundry had started production. The factory address is published as Alcı Mah. ASO 2-3, 2032. Cad., Temelli-Sincan / Ankara. The corporate text records the Aksöz Makina manufacturing plant founded in 1996 and 12,000 m² of enclosed production area. The catalogue includes cast-body rope sockets, cast pillow blocks and cast-body guide shoes. Castings feed elevator-component manufacturing.
Ankara · OSTIM Organized Industrial Zone
Balsan Plastik (yol Butonları)
Cast Metal Speed Hump and Bollard Manufacturing
Iron Casting ServiceThe C-28 ductile/metal cast speed hump (500×500×50 mm, 23 kg) is made for heavy machinery and military vehicles; the BLS-60 cast iron bollard (600 mm, 10 kg) blocks pavement parking and marks landscape boundaries. Cast metal traffic product manufacturing for municipal and institutional projects includes electrostatic paint, prismatic reflectors and steel screw mounting. Dimensional tolerance ±5%; TS EN ISO 9001:2015.
Kocaeli̇
Rolmak Döküm Sanayi ve Limited Şirketi
Ductile Iron Casting
Iron Casting ServiceModel moldings for rollers, rings and machine spare parts are made with mixers that have a total sand dispensing capacity of 70 tons/h. Chill moulds used in roller casting are designed to raise roller and ring quality. Melting is done in one double-pot induction furnace; up to 11 tons of metal can be melted in one heat. Chemical analyses are taken from each furnace and liquid-metal temperature is controlled; furnaces have ventilation and filtration to remove dust and smoke. Roll designs use special calculation methods to minimize casting-originated errors.
Karabük · Karabuk Organized Industrial Zone
TTT Casting
Induction Melting
Iron Casting ServiceMelting is on induction furnaces of 2×1 t/h. Annual casting capacity is 1,800 tonnes. A 90,000 m³/h filter system ventilates furnaces and the shop. Piece weight is 1–50 kg in ductile and grey iron.
Konya · Konya Organized Industrial Zone
TTT Casting
Spectral and Metallographic Testing
Iron Casting ServicePre-pour spectral analysis of the melt and post-cast metallographic and mechanical tests are applied. Pattern design, casting simulation and moulding-sand tests are also part of the process. The aim is that products cover all technical features of the original parts.
Konya · Konya Organized Industrial Zone
Modern Döküm
Single-Piece Casting 0.5–1,300 kg
Iron Casting ServiceSingle-piece castings from 0.5 kg to 1,300 kg are produced. Materials are grey iron, ductile iron, alloyed and unalloyed steel and stainless steel. The shop that started with a cupola moved into this weight and grade range with the 2002 AEG induction furnace.
Sakarya
Top industrial zones
Products in This Category
Approved supplier product catalogs in this category.
Rolmak Döküm Sanayi ve Limited Şirketi
Rod-Coil Rolling Mill Rolls
Iron Casting ProductCasting rolls used for rod and coil rolling mills, known as spherical (sphero) rolls in the industry, are classified as ferritic, perlitic and acicular. These rolls contain high alloys and can be used on all rolling steps, from preparation groups to finishing stands. Spherical graphite in the microstructure gives high breaking strength and blocks internal microcracks; high thermal conductivity dampens thermal stresses and delays thermal cracking. For rod-coil mills, preparation uses RDP 47-32 and RDP 57-41; middle group RDP 57-41 and RDP 65-47; post-finish RDP 67-48, RDAC 67-48 and RDAC 76-53; finish RDP 67-48, RDP 70-50, RDAC 74-52 and RDAC 83-57. The rolling mill layout may vary according to working conditions and the products to be drawn.
Karabük · Karabuk Organized Industrial Zone
Rolmak Döküm Sanayi ve Limited Şirketi
Angle-Profile Rolling Mill Rolls
Iron Casting ProductSphero rolls for angle and profile rolling mills have high tensile strength and thermal conductivity because of the spherical graphite they contain. They take their mechanical strength from the spherical graphite in their metallographic structure. After heat treatment these microstructures are suited to preparation, middle and finish groups. For angle-profile mills, preparation uses RDP 47-32 and RDP 57-41; middle group RDP 57-41 and RDP 67-48; post-finish RDP 67-48, RDAC 67-48 and RDAC 70-50; finish RDP 67-48, RDP 70-50, RDAC 70-50 and RDAC 76-53. The rolling mill layout may vary according to working conditions and the products to be drawn.
Karabük · Karabuk Organized Industrial Zone
Rolmak Döküm Sanayi ve Limited Şirketi
Rolling Mill Rings and Straightening Balls
Iron Casting ProductRings are used in middle-group and finish lines as a price-performance product; when used under suitable conditions, the increase in product amount per pass is significant. Before packaging, the straightening process removes linearity problems of the finished product. Rolmak produces straightening balls in hardness and microstructures prepared by its experienced teams so that maximum efficiency can be obtained. Rings and straightening balls are molded, cast, heat-treated and machined at the Karabük plant before shipment.
Karabük · Karabuk Organized Industrial Zone
TTT Casting
Automotive Supplier Castings
Iron Casting ProductTTT-casting was established to meet TTT-auto’s casting need; parts are produced to cover the technical features of the originals. TTT-auto manufactures brake-caliper repair kits for heavy-duty vehicles. Castings are 1–50 kg ductile and grey iron at 1,800 t/year.
Konya · Konya Organized Industrial Zone
TTT Casting
Grey Iron Castings
Iron Casting ProductGrey-iron parts of 1–50 kg are produced with ductile iron in TTT-casting’s range. A jacketed automatic moulding line of 600×700 mm at 60 moulds/hour and an 18 t/h sand plant are used. The foundry was set up in 2022 under the same roof to supply TTT-auto.
Konya · Konya Organized Industrial Zone
TTT Casting
Ductile Iron Castings (1–50 kg)
Iron Casting ProductTTT-casting produces ductile-iron and grey-iron parts from 1 kg to 50 kg on 3,500 m² indoor area. Annual capacity is 1,800 tonnes. From incoming material to the finished part, pattern design, casting simulation, sand tests, spectral analysis and metallographic and mechanical tests are applied.
Konya · Konya Organized Industrial Zone
Modern Döküm
Grey Iron Castings
Iron Casting ProductModern Döküm started with cupola grey iron in 1985 and continued grey iron after adding a 300 kg AEG induction furnace in 2002. Single pieces are cast from 0.5 kg to 1,300 kg. Sectors include machinery, paper, cement, oil refining, mining and automotive.
Sakarya
Modern Döküm
Ductile Iron Castings
Iron Casting ProductAfter the 2002 induction furnace, production expanded to grey iron, ductile iron, alloyed and unalloyed steel and stainless. Ductile-iron pieces are cast from 0.5 kg to 1,300 kg. The Arifiye/Sakarya plant supplies machinery and heavy-industry customers.
Sakarya
Foundry An
Grey Iron Castings (EN-GJL)
Iron Casting ProductGrey iron castings (EN-GJL grades) are produced by green sand and resin sand moulding. EN-GJL (formerly GG) is characterised by vibration damping and machinability for complex geometries needing dimensional accuracy. Parts can be delivered raw, primed or CNC machined, with ISO 9001 laboratory checks.
Konya
Foundry An
Ductile Iron Castings (EN-GJS)
Iron Casting ProductEN-GJS (formerly GGG) ductile iron is produced by green and resin sand moulding; it offers ductility, strength and impact resistance for critical mechanical and structural parts. Castings are exported from the Konya foundry to Europe. Chemical analysis, mechanical testing and NDT are applied batch by batch.
Konya
Morçelik Çelik Döküm
Ductile Iron Castings
Iron Casting ProductDuctile-iron castings are one of Morçelik’s main product groups with grey iron and steel. Output is 11,000 t/year from Konya 3rd OIZ with up to 10-tonne melts and more than 40 years of foundry experience. The plant holds ISO 9001, ISO 14001 and ISO 45001 and runs a seven-step process.
Konya · Büyükkayacık Organized Industrial Zone
Morçelik Çelik Döküm
Grey Iron Castings
Iron Casting ProductMorçelik produces grey-iron castings as part of 11,000 t/year of iron and steel output in the 7,000 m² Konya 3rd OIZ plant. Melting is up to 10 tonnes per heat with high-rate pouring. Parts follow a SolidWorks drawing through modelling, sand preparation, melting, moulding, cleaning/grinding and quality control.
Konya · Büyükkayacık Organized Industrial Zone
Services in This Category
Approved supplier service catalogs in this category.
Aspar Asansör Aksamları Pazarlama San. Tic. A.Ş.
Foundry Manufacturing
Iron Casting ServiceIn a 2019 news item ASPAR announced that its foundry had started production. The factory address is published as Alcı Mah. ASO 2-3, 2032. Cad., Temelli-Sincan / Ankara. The corporate text records the Aksöz Makina manufacturing plant founded in 1996 and 12,000 m² of enclosed production area. The catalogue includes cast-body rope sockets, cast pillow blocks and cast-body guide shoes. Castings feed elevator-component manufacturing.
Ankara · OSTIM Organized Industrial Zone
Balsan Plastik (yol Butonları)
Cast Metal Speed Hump and Bollard Manufacturing
Iron Casting ServiceThe C-28 ductile/metal cast speed hump (500×500×50 mm, 23 kg) is made for heavy machinery and military vehicles; the BLS-60 cast iron bollard (600 mm, 10 kg) blocks pavement parking and marks landscape boundaries. Cast metal traffic product manufacturing for municipal and institutional projects includes electrostatic paint, prismatic reflectors and steel screw mounting. Dimensional tolerance ±5%; TS EN ISO 9001:2015.
Kocaeli̇
Rolmak Döküm Sanayi ve Limited Şirketi
Ductile Iron Casting
Iron Casting ServiceModel moldings for rollers, rings and machine spare parts are made with mixers that have a total sand dispensing capacity of 70 tons/h. Chill moulds used in roller casting are designed to raise roller and ring quality. Melting is done in one double-pot induction furnace; up to 11 tons of metal can be melted in one heat. Chemical analyses are taken from each furnace and liquid-metal temperature is controlled; furnaces have ventilation and filtration to remove dust and smoke. Roll designs use special calculation methods to minimize casting-originated errors.
Karabük · Karabuk Organized Industrial Zone
TTT Casting
Induction Melting
Iron Casting ServiceMelting is on induction furnaces of 2×1 t/h. Annual casting capacity is 1,800 tonnes. A 90,000 m³/h filter system ventilates furnaces and the shop. Piece weight is 1–50 kg in ductile and grey iron.
Konya · Konya Organized Industrial Zone
TTT Casting
Spectral and Metallographic Testing
Iron Casting ServicePre-pour spectral analysis of the melt and post-cast metallographic and mechanical tests are applied. Pattern design, casting simulation and moulding-sand tests are also part of the process. The aim is that products cover all technical features of the original parts.
Konya · Konya Organized Industrial Zone
Modern Döküm
Single-Piece Casting 0.5–1,300 kg
Iron Casting ServiceSingle-piece castings from 0.5 kg to 1,300 kg are produced. Materials are grey iron, ductile iron, alloyed and unalloyed steel and stainless steel. The shop that started with a cupola moved into this weight and grade range with the 2002 AEG induction furnace.
Sakarya
Modern Döküm
Induction Melting and Casting
Iron Casting ServiceIn 2002 a 300 kg AEG induction furnace was added, expanding from cupola grey iron to grey iron, ductile iron, alloyed and unalloyed steel and stainless. Single pieces are 0.5–1,300 kg. The plant is at Hanlı Merkez Mahallesi, Boncuk Sokak No:5, Arifiye, Sakarya.
Sakarya
Foundry An
European Casting Export
Iron Casting ServiceFrom the Konya foundry, machined and unmachined castings are regularly exported to industrial customers in Germany, France, Italy and other EU markets, with export documentation and logistics. The group is an export company (An Dış Ticaret) plus two ISO 9001 foundries. Grey iron, ductile iron and steel have been supplied since 1990.
Konya
Morçelik Çelik Döküm
Heavy Melt Casting
Iron Casting ServiceWith melts of up to 10 tonnes and high-rate pouring, Morçelik produces large grey-iron, ductile-iron and steel castings. Annual capacity is 11,000 tonnes in a 7,000 m² indoor plant. Sectors from iron and steel to wind energy are served with more than 40 years of foundry experience.
Konya · Büyükkayacık Organized Industrial Zone
Morçelik Çelik Döküm
Casting Cleaning and Grinding
Iron Casting ServiceCleaning and grinding is one of Morçelik’s seven process steps, followed by quality control. The chain starts from a SolidWorks drawing and includes modelling, sand preparation, melting and moulding. ISO 9001, 14001 and 45001 support dimensional and quality standards at each stage.
Konya · Büyükkayacık Organized Industrial Zone
Kılavuz Döküm
Red Bronze Casting
Iron Casting ServiceKılavuz casts red bronze from 1 kg to 5,000 kg. Bronze is part of the same range as grey iron, ductile iron, steel, stainless and aluminium. Park furniture and industrial parts are made at the same plant from drawings, including pattern work.
İstanbul · Dudullu Organized Industrial Zone
Kılavuz Döküm
Aluminium Casting
Iron Casting ServiceKılavuz casts aluminium from 1 kg to 5,000 kg, alloyed as required. Aluminium sits alongside grey iron, ductile iron, steel, stainless and bronze in the material range. Pattern making and machining from drawings are offered at İMES.
İstanbul · Dudullu Organized Industrial Zone
Suppliers in This Category
23 suppliers
For buyers
Get quotes from Iron Casting suppliers
Browse verified companies below or describe your need to collect multiple quotes in Iron Casting quickly.
-
Verified profiles and certifications
-
Multiple quotes from one RFQ
-
Filter by capability and location
Browse Related Categories
Discover suppliers in adjacent industrial sectors.
Featured Supplier Profiles
Capability, certification, and export profiles with enough suppliers in this category.
Serial Production — Iron Casting manufacturers
22 approved suppliers
MaterialCast Iron — Iron Casting manufacturers
20 approved suppliers
IndustryMachinery Manufacturing — Iron Casting suppliers
19 approved suppliers
Technical standardEN — Iron Casting manufacturers
19 approved suppliers
CapabilityGray / Ductile Iron Casting — Iron Casting manufacturers
18 approved suppliers
CertificationISO 9001 certified Iron Casting suppliers
17 approved suppliers
ProcessHigh-Volume Production — Iron Casting manufacturers
16 approved suppliers
CapabilityLarge Castings — Iron Casting manufacturers
15 approved suppliers
MaterialCarbon Steel — Iron Casting manufacturers
15 approved suppliers
IndustryConstruction — Iron Casting suppliers
15 approved suppliers
CapabilityMachine Finishing — Iron Casting manufacturers
14 approved suppliers
ExportIron Casting suppliers exporting to Germany
14 approved suppliers
Featured Product Catalogs
Standard product types with enough suppliers in this category.
Featured Service Catalogs
Standard service types in this category that meet the supplier threshold.
Find the right supplier or list your company
Send RFQs as a buyer or publish your company profile in this category.