Solar Panels

Rooftop PV installations demand structural precision and controlled load management. Stark flat-roof systems are engineered to minimize penetration, protect roof membranes, and optimize ballast distribution under high wind and snow conditions. Each system is custom-designed according to roof type, load capacity and local climate, with a corrosion warranty of up to 25 years, using aluminium and coated-steel components for waterproofing-focused commercial roofs.

İzmi̇r

İvosis

C Profile

C profile is a perforated profile type with a wide range of applications; it can be supplied in various sizes. The perforated structure provides ease of assembly in production lines and high-tech projects without the need for bolts. Specially manufactured C profiles are supplied in the required dimensions and sections with burr-free cutting, and are used in energy facilities, as load-bearing elements in construction, in automotive production processes, and in steel door manufacturing.

Şanliurfa

Solarela

Roof Systems

Roof systems for trapezoidal and sandwich roofs are fastened with standard roof screws. Rails and clamps are aluminium EN AW 6063-T6; fasteners stainless A2-70; brackets stainless 304 and aluminium EN AW 6063-T6; sealing is EPDM. Module orientation is landscape or portrait. On-roof aluminium supply is 1,500 tons per month, processing EN-AW-6060, EN-AW-6063 and EN-AW-6082 with T5 and T6 heat treatment, for roof integration, waterproofing, aerodynamic design and quick installation.

Bursa

ERL Solar Montaj Sistemleri

Ground-Mount Systems

Land-type mounting systems are fixed systems that are designed and applied to the land according to the location, ground type, panel type and desired layout. Applications cover dual-post / single-post / east-west layouts, bifacial / monofacial modules, and driven pile / drilled-plus-concrete / concrete ballast foundations. Metal processing and galvanizing are carried out under one roof, with project-specific design and production and a Domestic Goods Certificate on all products.

Ankara

ERL Solar Montaj Sistemleri

Roof Mounting Systems

These are the solar mounting systems offered by ERL Solar Mounting Systems for installation on roofs. It is the most common installation site for buildings; suitable installation can be provided for any roof structure. The company offers panel mounting solutions for residential and commercial roofs. The mounting structures are widely used on sandwich panel, metal, membrane, concrete and tiled roofs.

Ankara

ERL Solar Montaj Sistemleri

Carport

ERL Solar carport systems are suitable for shopping-mall, hotel, commercial and private parking lots thanks to their ground clearance. Solar panels are mounted on parking areas with special structures at a height where vehicles can park underneath. Before installation, the mounting technique is decided after analysis by the specialist team; the architectural layout is then fixed according to the chosen design, ground conditions and sun orientation. Load and seismic calculations are completed and the structure is installed to national and international standards so that it remains serviceable in all weather throughout its service life.

Ankara

Garanti Çelik Yapı

GES C, Z, U and Sigma Profile Systems

GES profile systems are C, Z, U, Sigma, Plus and special-form steel purlins that hold PV modules at the design tilt and resist wind and snow loads. They are roll-formed to project length, 3D-modelled and punched for fully bolted, weld-free kit delivery. After cold forming, hot-dip galvanized members are dipped in a ~450°C zinc bath (e.g. 50-80 microns); pre-galvanized / Magnelis® / Macrolite® coil profiles add self-healing protection at cuts and holes. C sections are typically used as driven piles; lipped Z or Sigma sections as the main purlins. Oval slot holes of about 3-5 cm allow site level tolerance.

İstanbul

Garanti Çelik Yapı

Industrial Rooftop PV Carrier Systems

For industrial rooftop PV, existing factory or warehouse roofs are surveyed: column and beam thicknesses are measured and GES dead load (module + rails) is added to snow load in the static model. If capacity is insufficient, light steel or aluminium alloy stiffeners are added to main columns or trusses. Standing-seam, trapezoidal or sandwich-panel clamps grip the ribs without drilling the sheet; mini rails, L feet and clamps are supplied. Thinner Magnelis® / ZM roll-formed profiles may be used to cut roof load. Site welding is avoided so the galvanizing stays intact; kits arrive pre-punched for bolted assembly.

İstanbul

Solmet

Roof-top Solar Mounting Systems

Roof-top solar mounting systems are produced for flat, trapezoid and tile roofs. SM16 is a flat roof aluminum mounting system fixed by the ballast system; it is used for PV projects on large and small-sized roofs and does not require any fastener for installation. SM17 is a trapezoid roof aluminum mounting system. SM18 is a tile roof steel and aluminum mounting system. The systems are produced with advanced machinery and equipment. The high-level engineering design provides assembly and cost advantages.

Bursa · NOSAB Organized Industrial Zone

Solmet

Trapezoid and Tile Roof Mounting Profiles

The trapezoid roof aluminum mounting system (SM17) is used for PV projects on large and small-sized roofs. The tile roof steel and aluminum mounting system (SM18) is mounted on tile roofs and applied on the same scale of rooftop PV projects. System elements are produced with advanced machinery and equipment. The high-level engineering design provides assembly and cost advantages.

Bursa · NOSAB Organized Industrial Zone

Solarçelik

21x41 C Profile

The 21x41 C profile is a compact 21 mm-high mounting rail for industrial rooftop PV, sandwich-panel and standing-seam roofs. Section: A 41 mm base, B 21 mm height, C 8 mm lip. Thickness 1.2–2 mm; Ix 0.84 cm⁴. Pregalvanized unit weight is 0.88 kg/m at 1.20 mm, 1.08 kg/m at 1.50 mm and 1.41 kg/m at 2.00 mm. Steel grades S250GD, S350GD and DX51D; coating TS EN 10346 Z275 pregalvanized or TS EN ISO 1461 hot-dip galvanized. Slots are 11x25 mm oval CNC at 50 mm pitch. Stock lengths 3 m and 6 m, cut-to-length 1,000–12,000 mm.

İstanbul

Solarçelik

41x41 C Profile

The 41x41 C profile is the standard main carrier rail and purlin section for solar plant structures. Section: A 41 mm base, B 41 mm web, C 10 mm lip. Thickness 1.5–2.5 mm; pregalvanized weight 1.52 kg/m at 1.50 mm, 1.98 kg/m at 2.00 mm and 2.42 kg/m at 2.50 mm. Moments Ix 2.85 cm⁴, Iy 3.92 cm⁴. Grades S250GD, S350GD, DX51D; coatings TS EN 10346 and TS EN ISO 1461. 11x25 mm CNC oval slots at 50 mm pitch. Stock lengths 3 m, 4.2 m, 6 m, 6.2 m; cut-to-length 1,000–12,000 mm. Used with mid/end clamps and hammer-head bolts on rooftop rails and ground-mount purlins.

İstanbul

Services in This Category

Approved supplier service catalogs in this category.

Service type: 23 services

Stark Mounting

Solar Installation Engineering

Soil, terrain, wind, snow and seismic loads are assessed for each project; the support structure is designed from site data. Design follows Eurocodes and relevant National Annexes. For ground-mount work, pile embedment is set from the highest unit forces, profile geometry and soil; test piles are driven at several points and pull-out values are compared with the static report.

İzmi̇r

İvosis

SPP Roof Steel Construction

For trapezoidal sheet, sandwich panel, tile, flat roof and standing-seam rooftop solar applications, the construction system is selected after static load and seismic calculations. On sandwich panel roofs, purlin spacings are calculated and leak-tight installation is required. On standing-seam roofs, clamps are attached to the seam wings and tightened from the side without drilling; horizontal or vertical members are chosen according to panel layout.

Şanliurfa

Solarela

Solar Installation Engineering

Solar mounting components are tailored to each project to improve system performance, ensure panel compatibility and make installation faster. Design and structural analysis follow applicable international standards; tailor-made technical studies match site requirements. Platform design, detailed technical drawings with component specifications and static calculations sit in the same engineering workflow. Production is supplied in EN 1090-certified facilities with traceability from raw material procurement to final installation.

Bursa

EAE Elektrik A.Ş.

Solar Plant Installation Engineering

EAE can design and manufacture project-specific solutions for domestic and international renewable-energy projects. Experienced EAE engineers create project-based solutions; dedicated software produces accurate bills of materials, with static calculation and reporting via SAP 2000 and INVENTOR. Factory delivery is typically 3–4 weeks; an emergency production team can supply site needs within 48 hours. Mounting systems are produced for ground (driven and concrete), membrane roof and carport applications.

İstanbul

ERL Solar Montaj Sistemleri

Site Analysis, Feasibility and Design

As ERL, we first conduct site analysis and site feasibility in order to evaluate the site to be invested in the most effective way, and in the light of this data we design the most suitable construction for the application area. Sustainability is the core principle in mounting-system design, manufacturing, installation and maintenance. Correct analysis and design form the basis of the subsequent engineering and site implementation.

Ankara

ERL Solar Montaj Sistemleri

Project Design and Engineering

After the design is completed according to national and international standards, project design and engineering solutions are produced according to the unique parameters of the site such as client demands, regulatory requirements, site tests, static calculations, climate and geographical location. Engineering covers analysis, design and static calculation. Unique projects are designed from site-specific parameters including investor demands, site tests, shading analysis, climatic conditions and geographic location.

Ankara

ERL Solar Montaj Sistemleri

Implementation and Integration

We plan the implementation and integration services in the fields with expert engineers, implement them according to the project plan, control them at every step and complete them according to the projected principles. We carry out the implementation process with an effective project and supply management approach that adheres to occupational health and safety principles and complies with laws and regulations. Site analysis, maintenance and installation are among the application activities.

Ankara

Garanti Çelik Yapı

GES Structure Engineering

GES structure engineering simulates the site wind map for table frames and, for rooftop PV, measures column and beam thicknesses to produce a roof static report. Ground investigation decides ramming (C-section piles) versus concrete anchors. Punch coordinates go from 3D CAD to the roll-form CNC. On slopes, each row post length is calculated for south-facing terraced layout. Single-axis tracker mechanism and table engineering is included in this scope.

İstanbul

Solmet

Solar Installation Engineering

The process starts with a first meeting in which Solmet contacts the customer to understand GES needs, targets and location-specific requirements. A detailed site assessment and feasibility study is carried out to determine the applicability of the solar energy system and the structural considerations. Based on the assessment and feasibility study, Solmet designs a customized solar energy system that meets the specific requirements. In solar power plant designs, Solmet combines engineering with advanced machinery and equipment, and submits a comprehensive proposal including projected energy savings, financial analysis and cost estimates for solar panel mounting systems.

Bursa · NOSAB Organized Industrial Zone

Solarred

Structural Design

Static project planning is a critical step in the design and installation of solar energy systems. The process covers correct placement of panels, mounting structures, cable routes and other components, strength calculations for the supporting structures, and the resulting design. Support-structure calculations use wind, snow load and other environmental factors. Site selection and topographic analysis set panel tilt and height. Structural design and technical drawings are produced, and projects are completed with documents matching local codes and standards.

Ankara

Solarred

Mechanical and Electrical Installation

Mechanical assembly covers physically installing solar panels, mounting structures, carrier systems and other components. Services include erecting the mounting structures, installing panels at the designed tilt and height, cable management, and post-installation inspection. Electrical installation covers connecting panels to inverters and configuring the system, electrical panel installation, safe insulated cable connections, plus testing and validation. These steps are fundamental to a durable, efficient solar installation.

Ankara

Isotec Enerji A.Ş.

Solar Installation Engineering and Static Design