Industrial category
Plastic Extrusion
Specialist companies in Plastic Extrusion.
Subcategories
Top industrial zones
Products in This Category
Approved supplier product catalogs in this category.
Dkyplast
U-PVC Pressure Pipe Fittings
Irrigation Pipe & Hose ProductThe plant produces fittings together with U-PVC pressure potable-water pipes. The fitting line connects to the same Ø20–500 mm, 6 m socketed, 4–16 atm pipes on infrastructure, industrial and agricultural irrigation projects. Reducers, tees and couplings for push-fit and solvent sockets are used on pressurized networks.
İzmi̇r · Kemalpasa Organized Industrial Zone
Dkyplast
U-PVC Submersible Pump Column Pipe
Irrigation Pipe & Hose ProductDkyPlast U-PVC column pipes are self-threaded and self-sealed. They are produced from 1 inch to 4 inch for submersible pumps in boreholes as an alternative to galvanized and steel pipe. uPVC specific gravity is about 1.40 g/cm³; a 4 inch 3 m pipe can be carried by one person. The thread form allows assembly and dismantling without burrs.
İzmi̇r · Kemalpasa Organized Industrial Zone
Dkyplast
U-PVC Pressure Potable / Irrigation Pipes
Irrigation Pipe & Hose ProductDKYPlast U-PVC pressure potable-water pipes are extruded from unplasticized PVC-U to TS EN 1452-2. Diameters run from Ø20 mm to Ø500 mm; length is 6 m useful plus socket. Classes 6, 10 and 16 atm are produced under TS EN ISO 1452-2, plus a 4 atm class outside that standard. Push-fit and solvent sockets; black, blue, orange and white. Agricultural irrigation networks are among the stated applications.
İzmi̇r · Kemalpasa Organized Industrial Zone
Pipelife Türkiye
Clamped and Latch Sprinkler Pipes
Irrigation Pipe & Hose ProductARILI/PIPELIFE clamped sprinkler systems are produced in Ø75, 90, 110, 125, 140 and 160 mm. The latch system covers Ø50 mm to Ø200 mm. Pipes are made from high-density polyethylene in 5 and 6 m lengths, PN 4, 6, 8 and 10, in PE 100. They are assembled and removed in field sprinkler irrigation with leak-tight joints even at low pressure.
Ni̇ğde · Nigde Organized Industrial Zone
Pipelife Türkiye
PE Agricultural Irrigation Pipes
Irrigation Pipe & Hose ProductPolyethylene irrigation pipes are used as main, sub-main and lateral lines. They are produced from black compound with well-dispersed UV stabilizer for sunlight resistance in farm, garden and field use. Because they can be made in the required diameter, long runs are laid with fewer fittings. Flexibility and strength are used both to carry water to the plot and to distribute it in the field.
Ni̇ğde · Nigde Organized Industrial Zone
Pipelife Türkiye
Flat Drip Irrigation Pipes
Irrigation Pipe & Hose ProductPipelife flat drip irrigation pipes are produced in 17, 22 and 25 mm diameters. Emitter spacings are 10, 15, 20, 25, 30, 33, 40, 50, 60, 75 and 100 cm. Flows are 0.8, 1.0, 1.6, 2.2, 2.6 and 3.2 l/h. Wall thickness from 0.5 mil to 36 mil covers single-season and multi-year use. The range includes thin, medium and heavy-wall lines with midi, flat micro and flat PC emitters.
Ni̇ğde · Nigde Organized Industrial Zone
Topçuoğlu Plastik
16 mm Perforated Drip Irrigation Pipe
Irrigation Pipe & Hose ProductThe 16 mm perforated drip irrigation pipe is produced in 0.9, 1.0, 1.1 and 1.2 mm wall thicknesses. Emitter spacing options are 20, 25, 33, 40, 50, 60, 70, 75, 80, 90 and 100 cm. Coil length is 400 m; flow options are 2, 4 and 8 l/h. It is used to deliver controlled water to the root zone on row crops and vegetable fields.
Konya · Büyükkayacık Organized Industrial Zone
Topçuoğlu Plastik
Round Plain Drip Pipes
Irrigation Pipe & Hose ProductRound plain drip pipes are produced as 16 mm with 0.9–1.2 mm wall and 400 m coils; 20 mm with 1.0, 1.2 and 1.5 mm wall and 300 m coils; 25 mm with 1.2, 1.5 and 2.0 mm wall and 250 m coils; and 32 mm with 1.5 mm wall and 150 m coils. The unperforated line is used as a lateral for online drippers or micro-sprinklers.
Konya · Büyükkayacık Organized Industrial Zone
Topçuoğlu Plastik
PE Coil Irrigation Pipes
Irrigation Pipe & Hose ProductTopçuoğlu black PE coil irrigation pipes are produced in 20, 25, 32, 40, 50, 63, 75, 90 and 110 mm diameters. The 6 atm class is packed as 200 m coils for 20–25 mm and 100 m coils for 32–90 mm; 10 atm and 16 atm classes include 50 m coils at 110 mm. The blue coil range covers the same diameters at 10 atm and 16 atm. Pipes are used as PN6/PN10 underground and above-ground irrigation mains and laterals.
Konya · Büyükkayacık Organized Industrial Zone
Özdoğanplast
Latch sprinkler irrigation pipe
Irrigation Pipe & Hose ProductThe latch sprinkler page states HDPE extrusion, UV stabilizer and a lock joint. PN6 and PN10; EPDM seals; no tools or welding; for uneven land. It is SUNPIPE’s above-ground agricultural sprinkler lateral.
İzmi̇r · Kemalpasa Organized Industrial Zone
Özdoğanplast
PE 100 HDPE pipes
Irrigation Pipe & Hose ProductThe PE 100 page specifies LDPE/HDPE PE100 to TSE 12201-2+A1 and ISO; blue and black. Thinner wall than PE40/PE80 at the same PN. Uses: agricultural irrigation, potable networks, sea outfall, fire water, fish farms. The homepage also states PN4–PN32.
İzmi̇r · Kemalpasa Organized Industrial Zone
Özdoğanplast
Drip pipes (Ø17 / Ø22 flat)
Irrigation Pipe & Hose ProductThe drip page describes water delivered to the root. Flat drip uses thinner wall and flat emitters for long runs; perforated type is for short runs, coils up to 400 m, 2–4 L/h; round blank bore is for longer pulls. Fittings include join/outlet nipples, 16×16 barbed, grommet, tee, elbow and reducer. Made under SUNPIPE at Kemalpaşa and Şanlıurfa.
İzmi̇r · Kemalpasa Organized Industrial Zone
Services in This Category
Approved supplier service catalogs in this category.
Dkyplast
Submersible Pump Column Pipe Manufacturing
Irrigation Pipe & Hose ServiceColumn pipe is produced in 1–4 inch self-threaded, self-sealed U-PVC. It is used as the submersible-pump string in boreholes instead of steel column. Low density (about 1.40 g/cm³) reduces handling labour; the thread form suits repeated make-and-break.
İzmi̇r · Kemalpasa Organized Industrial Zone
Dkyplast
Agricultural Irrigation U-PVC Pipe Manufacturing
Irrigation Pipe & Hose ServiceProduction started in 2024 at Kemalpaşa OIZ includes U-PVC pressure-pipe extrusion for agricultural irrigation projects. Ø20–500 mm, 4/6/10/16 atm and 6 m socketed length follow TS EN 1452-2. Potable-grade PVC-U is used on pressurized irrigation mains and field networks.
İzmi̇r · Kemalpasa Organized Industrial Zone
Dkyplast
Infrastructure and Industrial U-PVC Extrusion
Irrigation Pipe & Hose ServiceThe same line produces U-PVC pressure potable pipe for infrastructure and industrial projects. Diameters 20–500 mm, colours black/blue/orange/white, push-fit or solvent socket. TS EN ISO 1452-2 classes 6–16 atm plus 4 atm are used on drinking-water, agricultural and industrial networks.
İzmi̇r · Kemalpasa Organized Industrial Zone
Pipelife Türkiye
ArılıLab Quality Control and Pipe Testing
Irrigation Pipe & Hose ServiceArılıLab is quality control integrated from raw-material verification to final inspection. Systematic testing supports traceability and alignment with potable water, wastewater, gas and agriculture standards. Drip, sprinkler and PE irrigation pipes on the Niğde line are produced under this laboratory discipline.
Ni̇ğde · Nigde Organized Industrial Zone
Pipelife Türkiye
Sprinkler Irrigation System Manufacturing
Irrigation Pipe & Hose ServiceClamped and latch sprinkler pipes are produced in PE 100, 5–6 m lengths, Ø50–200 mm and PN 4–10. The Turkish Patent Institute-approved clamped line is Ø75–160 mm. The system is supplied with latch or clamp joints for rapid field assembly and removal on field crops.
Ni̇ğde · Nigde Organized Industrial Zone
Pipelife Türkiye
Drip Irrigation Pipe Manufacturing
Irrigation Pipe & Hose ServiceThe Niğde OIZ plant extrudes flat drip lines with midi and micro emitters in thin/medium wall and heavy-wall lines with flat PC emitters. Subsurface PC flat drip is produced in 16 and 20 mm, 24 and 36 mil wall, 1.6, 2.1 and 3.4 l/h with anti-siphon emitters. Diameter, spacing and wall are selected for row-crop and orchard projects.
Ni̇ğde · Nigde Organized Industrial Zone
Topçuoğlu Plastik
PE Coil Irrigation Pipe Manufacturing
Irrigation Pipe & Hose ServiceThe Konya 2nd OIZ plant extrudes underground and above-ground PE coil irrigation pipe. Diameters run 20–110 mm with 6, 10 and 16 atm pressure classes; coil lengths are 50, 100 or 200 m by diameter. Black and blue lines are used for mains and in-field distribution.
Konya · Büyükkayacık Organized Industrial Zone
Topçuoğlu Plastik
Perforated and Plain Drip Pipe Production
Irrigation Pipe & Hose ServicePerforated drip pipe is produced at 16 mm with 0.9–1.2 mm wall and 2–8 l/h flow, and at 20 mm with 1.1 mm wall in 300 m coils. Plain round drip pipe covers 16–32 mm diameters and 150–400 m coils. Production includes emitter spacings from 20 to 100 cm.
Konya · Büyükkayacık Organized Industrial Zone
Topçuoğlu Plastik
Drip Irrigation Fitting Manufacturing
Irrigation Pipe & Hose ServiceThe plant manufactures drip irrigation fittings; the catalogue lists barb mini valves, gasket-outlet barb valves and threaded mini valves. Parts connect 16 mm and 20 mm drip lines to PE coil laterals. Injection-moulded valves are used in the field for shut-off and line splitting.
Konya · Büyükkayacık Organized Industrial Zone
Özdoğanplast
PE100 infrastructure and irrigation-main manufacturing
Irrigation Pipe & Hose ServicePE100 is made to TSE 12201-2+A1, blue/black, for irrigation mains and potable networks. About also ties corrugated, HDD and fish-farm pipe to the same 20,000 m² capacity. Certificates include ISO 9001, 14001, 45001 and TSE.
İzmi̇r · Kemalpasa Organized Industrial Zone
Özdoğanplast
Latch sprinkler pipe manufacturing
Irrigation Pipe & Hose ServiceLatch sprinkler pipe is HDPE-extruded with UV and EPDM lock seals at PN6/PN10. Tool-free joints serve field sprinkler laterals. The Şanlıurfa OSB plant supports the same agricultural range.
İzmi̇r · Kemalpasa Organized Industrial Zone
Özdoğanplast
Drip irrigation pipe manufacturing
Irrigation Pipe & Hose ServiceAbout states SUNPIPE drip pipes are made in İzmir Kemalpaşa OSB and Şanlıurfa OSB on 20,000 m². The product page lists Ø17/Ø22 flat, perforated and round-blank types, 400 m coils and 2–4 L/h. They are extruded as part of the agricultural range.
İzmi̇r · Kemalpasa Organized Industrial Zone
Suppliers in This Category
28 suppliers
For buyers
Get quotes from Plastic Extrusion suppliers
Browse verified companies below or describe your need to collect multiple quotes in Plastic Extrusion quickly.
-
Verified profiles and certifications
-
Multiple quotes from one RFQ
-
Filter by capability and location
Browse Related Categories
Discover suppliers in adjacent industrial sectors.
Injection Molding
Specialist companies in Injection Molding.
EPDM Seals
Specialist companies in EPDM Seals.
Custom Injection Molding
Turkish manufacturers and suppliers in Custom Injection Molding.
Molded Plastics
Turkish manufacturers and suppliers in Molded Plastics.
Molded Rubber Goods
Turkish manufacturers and suppliers in Molded Rubber Goods.
Rubber Molding
Turkish manufacturers and suppliers in Rubber Molding.
Plastic Components
Turkish manufacturers and suppliers in Plastic Components.
O-Rings
Turkish manufacturers and suppliers in O-Rings.
Featured Supplier Profiles
Capability, certification, and export profiles with enough suppliers in this category.
Serial Production — Plastic Extrusion manufacturers
78 approved suppliers
Technical standardEN — Plastic Extrusion manufacturers
69 approved suppliers
MaterialPE (Polyethylene) — Plastic Extrusion manufacturers
56 approved suppliers
CertificationISO 9001 certified Plastic Extrusion suppliers
53 approved suppliers
MaterialHDPE — Plastic Extrusion manufacturers
48 approved suppliers
IndustryConstruction — Plastic Extrusion suppliers
42 approved suppliers
CapabilityTube & Hose Extrusion — Plastic Extrusion manufacturers
39 approved suppliers
MaterialPVC — Plastic Extrusion manufacturers
38 approved suppliers
ProcessHigh-Volume Production — Plastic Extrusion manufacturers
38 approved suppliers
MaterialPP (Polypropylene) — Plastic Extrusion manufacturers
32 approved suppliers
IndustryAgriculture — Plastic Extrusion suppliers
31 approved suppliers
IndustryPackaging — Plastic Extrusion suppliers
31 approved suppliers
Featured Product Catalogs
Standard product types with enough suppliers in this category.
Featured Service Catalogs
Standard service types in this category that meet the supplier threshold.
Find the right supplier or list your company
Send RFQs as a buyer or publish your company profile in this category.