Logistics &amp; Warehousing

Back-to-back racking is the most widely used storage system for heavy goods stacked on pallets, crates or baskets, with a broad range of use. The system applies the FIFO (first in, first out) principle and suits storage of a large variety and quantity of products. Each pallet is stored in an independent bay. The modular structure of uprights, beams, connectors and protective accessories is engineered to pallet size, weight and forklift type. Rack height, bay clearance and number of levels change with the product.

Manisa · Muradiye Organized Industrial Zone

Reta Mühendislik Depo Raf Sistemleri San. ve Tic. A.Ş.

Drive-In Racking System

Drive-in racking is a high-density storage solution for large quantities of products that are the same in type and characteristics. The forklift enters the lane inside the rack block to place and retrieve pallets, so fewer aisles are needed and more pallets fit in the same area. The system is engineered as a channel structure suited to LIFO, with pallet support rails and guide rails. It is used in food, beverage, chemical, logistics, production and cold-storage warehouses.

Manisa · Muradiye Organized Industrial Zone

Reta Mühendislik Depo Raf Sistemleri San. ve Tic. A.Ş.

Cantilever Racking System

Industrial Transport Product

Cantilever racking is used especially for stacking long goods. Uprights and arms selected by load allow a wide range of products to be stored. The structure consists of vertical columns and cantilever arms fixed to them. Long materials such as pipe, profile, panel, timber, chipboard and wooden sheet are placed directly on the arms with no obstruction in front of the rack. The system can be single-sided or double-sided; arm length, height and load capacity are planned to product length and weight.

Manisa · Muradiye Organized Industrial Zone

BNA Tarım ve İş Makineleri

180° Rotating Fork Carriage

The 180° rotating fork carriage is a forklift rotator manufactured by BNA. It is listed for ISO 2328 mounting classes 2A, 3A and 4A, with capacities from 1,500 kg to 5,000 kg and a load centre of 500 or 600 mm. Rotator width is 1,000–1,230 mm, chassis width 1,200–1,300 mm and lost load distance 242 mm. The attachment is produced without forks; the forklift’s own forks are used. It has one hydraulic function. It turns and transports loads such as pallets, crates, boxes, casting ladles and containers through 180°. It can be built to rotate 180° in one direction or 90° in both directions.

Adana

BNA Tarım ve İş Makineleri

360° Rotator Bale Clamp

Industrial Transport Product

The 360° rotator bale clamp is used for loading, unloading and storing bales such as cotton wool, piece cloth and recycling. It is listed in ISO class 2A at 1,600 kg and 2,200 kg capacity with a 500 mm load centre. Opening range runs from 400/1,600 mm to 550/2,100 mm depending on the model. Arm length is 1,000 mm, arm thickness 30 mm, arm height 350 mm and lost load distance 198 mm. It has two hydraulic functions and rotates 360° in both directions. Arm, chassis and other dimensions can be changed to order; a hydraulic jack and an integral sideshifter valve can be added.

Adana

BNA Tarım ve İş Makineleri

Double-Arm Two-Pad Paper Roll Clamp

Industrial Transport Product

The double-arm, two-pad paper roll clamp is used for loading and unloading paper rolls and stacking them in the warehouse. ISO 2328 classes 2A, 3A and 4A are listed at 2,000, 3,000, 4,000 and 5,000 kg. Roll diameter ranges from 350 mm minimum to 2,100 mm maximum depending on the model; pad length is 680, 800 or 1,050 mm. It has two hydraulic functions. The short arm is fixed, the long arm moves, and rotation is continuous 360° left and right. The inside of the retainer pads can be covered with rubber, metal or polyurethane; pad dimensions can be made to order. A hydraulic jack valve can be added.

Adana

Heber Mühendislik

Heavy-Duty Racking System

The heavy-duty racking system is engineered with thick-walled steel profiles and reinforced connectors for facilities that need storage beyond standard pallet-rack capacity. It is sized for dense loads such as coils, reels, dies and large industrial goods, and is widely used in metal, automotive, white-goods and construction-materials sectors. Bay capacity reaches up to 10,000 kg; each project is customized by engineering calculation based on product weight, forklift/crane traffic and building statics.

İzmir · Ataturk Organized Industrial Zone

Heber Mühendislik

Back-to-Back Warehouse Racking

Back-to-back warehouse racking joins two rows into a single block, cutting aisle count and raising storage capacity. Direct forklift access to every pallet location supports FIFO/LIFO stock control and suits medium to heavy pallet loads. Built from hot-rolled steel profiles, the system can be installed up to 12 m high, carry up to 3,000 kg per bay and complies with TS EN 15512. Typical uses include logistics warehouses, multi-SKU pallet areas and e-commerce fulfillment centers.

İzmir · Ataturk Organized Industrial Zone

Heber Mühendislik

Mezzanine Racking Systems

A mezzanine racking system horizontally divides existing warehouse height to create an extra floor, raising storage or operations capacity without enlarging the footprint. It is designed as a complete system with walkways, stairs, guardrails and goods-lift integration, and is engineering-approved via static calculations for building loads and intended use. Floor load capacity is 500–1,000 kg/m² with sheet-panel, OSB or grated decking options; the structure is made of hot-rolled steel.

İzmir · Ataturk Organized Industrial Zone

Çetindağ Endüstriyel

Light-Duty Warehouse Racking Systems

Çetindağ Endüstriyel light-duty warehouse racking is designed for warehouses, archives, offices and retail areas. Each level carries 250–1000 kg. The modular bolted/clip-in system expands without welding and uses 1.5–2 mm steel profiles for long-life storage.

İstanbul · Ikitelli Organized Industrial Zone

Çetindağ Endüstriyel

Heavy-Duty Pallet Racking Systems

Çetindağ Endüstriyel heavy-duty pallet racking is engineered for heavy and palletized loads. Modular steel frames, high load capacity and configurable bay heights support safe pallet storage and better warehouse utilization for varying pallet sizes.

İstanbul · Ikitelli Organized Industrial Zone

Çelik Raf

Boltless Steel Shelving System

Steel shelving (also known as clip or boltless shelving) is among the most common storage products. It is a simple, effective solution for light to medium loads, reconfigurable and easy to move. Fast installation saves time and space, with adjustable shelf levels. It is a low-cost choice especially for archiving. Folder-height examples: 6 shelves at 2.00 m, 7 at 2.50 m, 8 at 3.00 m; depths of 31 cm and 60 cm are offered.

İstanbul · Ikitelli Organized Industrial Zone

Services in This Category

Approved supplier service catalogs in this category.

Service type: 15 services

Reta Mühendislik Depo Raf Sistemleri San. ve Tic. A.Ş.

Racking System Engineering

The engineering team designs storage solutions for each site in line with European Racking Federation (FEM) guidelines and EN standards. Planning is based on EN 15512 structural design of adjustable pallet racking, EN 15620 tolerances and clearances, EN 1993-1-3 cold-formed steel, EN 16681 seismic design, EN 15629 specifications and EN 15635 application and maintenance. Systems compliant with EN 15512 and tested at university are engineered to site dimensions and the product to be stored.

Manisa · Muradiye Organized Industrial Zone

Reta Mühendislik Depo Raf Sistemleri San. ve Tic. A.Ş.

Racking System Manufacturing

Racking systems are formed on roll-form lines in the 20,000 m² enclosed plant in Manisa. Robotic welding, a fully automatic power & free paint shop and integrated quality control are part of manufacture aimed at strength and long service life. ISO 9001 covers design, sales, production, installation and after-sales service. About 45% of production is exported to 41 countries.

Manisa · Muradiye Organized Industrial Zone

Reta Mühendislik Depo Raf Sistemleri San. ve Tic. A.Ş.

Racking System Installation

Since its founding the company has carried out design, manufacturing and installation together with its engineering staff. The ISO 9001 certificate also covers installation and after-sales service. Before installation, site conditions, aisle layout, load capacity and operating flow are assessed. On back-to-back, drive-in and cantilever projects, installation is completed under the same responsibility as engineering and manufacture.

Manisa · Muradiye Organized Industrial Zone

BNA Tarım ve İş Makineleri

Attachment Maintenance and Repair

BNA repairs hydraulic and mechanical faults on attachments and carries out maintenance so the attachment keeps its performance. During maintenance or repair the customer is notified by SMS when the unit arrives at the facility. After the work and functional tests are finished, shipment status is also sent by SMS. The steps are arrival at the facility, SMS notice, repair or maintenance, functional testing and shipment notice. The service is carried out at the plant in Seyhan, Adana.

Adana

BNA Tarım ve İş Makineleri

Attachment Spare Parts

BNA supplies spare parts so attachments can be used at full performance throughout their service life. Spare-part and quotation requests can be sent to [email protected], by phone on +90 322 262 2 262, or through the quote form on the product pages. After-sales technical support and maintenance are offered to keep product performance. Manufacturing is at the plant in Seyhan, Adana, and the company holds ISO 9001:2009.

Adana

BNA Tarım ve İş Makineleri

Custom Attachment Design and Manufacture

With 25 years of attachment manufacturing experience, BNA designs and builds attachments for the customer’s workflow, the load being handled and the machine. Attachments are made to fit forklift brands that use an ISO fork carriage, in class 2, 3 and 4 carriage sizes. For a special size or design it is enough to state the machine brand, model and capacity. Production is carried out with local resources at the plant in Seyhan, Adana.

Adana

Heber Mühendislik

Seismic Analysis Racking Service

The seismic analysis racking service starts by modelling your racking's dynamic behaviour against the site earthquake hazard map and soil class. Calculations based on EN 16681 size uprights, beams, anchors and bracing for seismic loads. Existing systems receive a strengthening report; new installs get seismically approved static projects and construction drawings. Scope covers analysis, design and application.

İzmir · Ataturk Organized Industrial Zone

Çetindağ Endüstriyel

Free Rack Survey and Project Design

A professional team provides free on-site rack survey and project design tailored to the facility. The goal is efficient warehouse layout and selecting the right racking system together. Quotes for light, heavy and narrow-aisle systems are prepared from depth, height and level data with fast response.

İstanbul · Ikitelli Organized Industrial Zone

Karsan Raf Sistemleri (ayc)

Site Survey, Layout and Load Calculation

An industrial racking project starts by measuring the warehouse, not by picking from a catalogue. KARSAN surveys column spacing, clear height, floor, doors, ramps and sprinkler lines on site. Layout and bay load capacity are calculated from pallet size, pallet weight and the handling truck; aisle width, levels and bay size follow that calculation. DWG or PDF drawings speed the survey. Quotes are built on the capacity study, and the same team carries the job from survey through installation so engineering, production and fit-up stay aligned.

Konya

Karsan Raf Sistemleri (ayc)

Installation and Handover

KARSAN installs with its own crew. Upright plumb, beam locks, anchors and base plates are checked during fit-up. Parts are made in the Konya plant—from cutting and bending through welding and powder coating—then erected on site; production stays in Konya while installation covers Turkey nationwide. At handover, the permitted load for each bay is left in writing so capacity labels are clear and later inspection, repair or spare-part requests stay with the same technical team. Central Anatolia and the Mediterranean corridor are frequent zones, with national coverage available.

Konya

Karsan Raf Sistemleri (ayc)

Rack Inspection, Repair and Spare Parts

In-service inspections check upright and beam damage, missing safety pins, loose anchors and unlabelled bays, documented with photos. Following EN 15635 practice, damage is graded light, medium or severe; severe bays must be emptied and marked. Struck uprights, bent beams or broken base plates are replaced on site—damaged parts are not straightened for reuse. Uprights, beams, pins, base plates, anchors, mesh decks, pallet supports and column/corner protectors are made in-house so matching spares come from stock or short production. Relocations include dismantling, re-planning and re-erection; adding levels or changing bay heights triggers a fresh capacity calculation.

Konya

Saygın Kastor ve Tekerlek İmalat San. ve Tic. A.Ş.

Industrial-Wheel Manufacturing