Industrial category
Irrigation Pipe & Hose
Turkish manufacturers of PE irrigation pipe, drip irrigation pipe, sprinkler pipe and watering hose.
Top industrial zones
Products in This Category
Approved supplier product catalogs in this category.
Palaplast
Layflat PVC Irrigation Hoses
Irrigation Pipe & Hose ProductSUN-FLOW and PM GROUP layflat PVC irrigation hoses are produced in 2 inch (53 mm), 2½ inch (65 mm) and 3 inch (78 mm) inside diameter. The SF-10 blue line is about 5.4 atm working pressure and the SF-55 grey line about 10 atm; packing is 50 m coils. They are laid as flat hose for field mains and drip/sprinkler offtakes.
İzmi̇r · Menemen Plastik Ihtisas Organized Industrial Zone
Palaplast
Paladrip PE Drip Irrigation Pipe
Irrigation Pipe & Hose ProductPaladrip is a PE dripline with embodied emitters. 16 mm is produced at 2.0 and 3.4 l/h, 20–100 cm spacing, 400 m coils (100 m option at 33 cm). 20 mm is offered at 1.8, 3.3 and 7.4 l/h in 300 m coils (100 m at 33 cm). Black field line and brown Garden-Plast packing are listed.
İzmi̇r · Menemen Plastik Ihtisas Organized Industrial Zone
Palaplast
LDPE Irrigation Pipes
Irrigation Pipe & Hose ProductDRIP-PAL LDPE irrigation pipes are produced in 16, 20, 25 and 32 mm OD in black and brown. Coil lengths are 25/50/100/300 m for 16 and 20 mm, 25/50/100/250 m for 25 mm and 25/50/100/200 m for 32 mm. They are used as mains/laterals for online drippers, micro-sprinklers and drip lines in garden and field irrigation.
İzmi̇r · Menemen Plastik Ihtisas Organized Industrial Zone
Pipelife Türkiye
Clamped and Latch Sprinkler Pipes
Irrigation Pipe & Hose ProductARILI/PIPELIFE clamped sprinkler systems are produced in Ø75, 90, 110, 125, 140 and 160 mm. The latch system covers Ø50 mm to Ø200 mm. Pipes are made from high-density polyethylene in 5 and 6 m lengths, PN 4, 6, 8 and 10, in PE 100. They are assembled and removed in field sprinkler irrigation with leak-tight joints even at low pressure.
Ni̇ğde · Nigde Organized Industrial Zone
Pipelife Türkiye
PE Agricultural Irrigation Pipes
Irrigation Pipe & Hose ProductPolyethylene irrigation pipes are used as main, sub-main and lateral lines. They are produced from black compound with well-dispersed UV stabilizer for sunlight resistance in farm, garden and field use. Because they can be made in the required diameter, long runs are laid with fewer fittings. Flexibility and strength are used both to carry water to the plot and to distribute it in the field.
Ni̇ğde · Nigde Organized Industrial Zone
Pipelife Türkiye
Flat Drip Irrigation Pipes
Irrigation Pipe & Hose ProductPipelife flat drip irrigation pipes are produced in 17, 22 and 25 mm diameters. Emitter spacings are 10, 15, 20, 25, 30, 33, 40, 50, 60, 75 and 100 cm. Flows are 0.8, 1.0, 1.6, 2.2, 2.6 and 3.2 l/h. Wall thickness from 0.5 mil to 36 mil covers single-season and multi-year use. The range includes thin, medium and heavy-wall lines with midi, flat micro and flat PC emitters.
Ni̇ğde · Nigde Organized Industrial Zone
Topçuoğlu Plastik
16 mm Perforated Drip Irrigation Pipe
Irrigation Pipe & Hose ProductThe 16 mm perforated drip irrigation pipe is produced in 0.9, 1.0, 1.1 and 1.2 mm wall thicknesses. Emitter spacing options are 20, 25, 33, 40, 50, 60, 70, 75, 80, 90 and 100 cm. Coil length is 400 m; flow options are 2, 4 and 8 l/h. It is used to deliver controlled water to the root zone on row crops and vegetable fields.
Konya · Büyükkayacık Organized Industrial Zone
Topçuoğlu Plastik
Round Plain Drip Pipes
Irrigation Pipe & Hose ProductRound plain drip pipes are produced as 16 mm with 0.9–1.2 mm wall and 400 m coils; 20 mm with 1.0, 1.2 and 1.5 mm wall and 300 m coils; 25 mm with 1.2, 1.5 and 2.0 mm wall and 250 m coils; and 32 mm with 1.5 mm wall and 150 m coils. The unperforated line is used as a lateral for online drippers or micro-sprinklers.
Konya · Büyükkayacık Organized Industrial Zone
Topçuoğlu Plastik
PE Coil Irrigation Pipes
Irrigation Pipe & Hose ProductTopçuoğlu black PE coil irrigation pipes are produced in 20, 25, 32, 40, 50, 63, 75, 90 and 110 mm diameters. The 6 atm class is packed as 200 m coils for 20–25 mm and 100 m coils for 32–90 mm; 10 atm and 16 atm classes include 50 m coils at 110 mm. The blue coil range covers the same diameters at 10 atm and 16 atm. Pipes are used as PN6/PN10 underground and above-ground irrigation mains and laterals.
Konya · Büyükkayacık Organized Industrial Zone
Serdrip
22 mm flat drip irrigation pipe
Irrigation Pipe & Hose ProductThe 22 mm flat page lists Ø22 wall 0.20 mm coils 1800 m and 0.30 mm coils 1200 m, plus Ø25 0.30 mm × 1000 m. Flow 1.6–2.2 L/h. A recommended run-length table by slope and pressure is on the same page. Flat drip is the thin-wall line in Serdrip’s agricultural drip range.
Konya · Büyükkayacık Organized Industrial Zone
Serdrip
Round drip irrigation pipe (16/20 mm)
Irrigation Pipe & Hose ProductThe round category page calls round drip the backbone of drip systems, delivering water to the root. Child SKUs are 16 mm perforated, 20 mm perforated, and 16 & 20 mm plain laterals. About ties 40,000,000 m/year drip pipe to the Konya Büyükkayacık OSB factory.
Konya · Büyükkayacık Organized Industrial Zone
Serdrip
17 mm flat drip irrigation pipe
Irrigation Pipe & Hose ProductThe 17 mm flat page tables Ø17; wall 0.15 / 0.20 / 0.25 mm; spacing 20–50 cm; coils 2500 / 2300 / 1800 m; flow 1.6–2.2 L/h. Category copy allows PVC or PE and recommends PE for long-term use. It is part of the 40 million m/year drip capacity at Büyükkayacık OSB.
Konya · Büyükkayacık Organized Industrial Zone
Services in This Category
Approved supplier service catalogs in this category.
Palaplast
Irrigation Network Technical Support
Irrigation Pipe & Hose ServicePalaplast specialized staff provide technical support for every irrigation network. The company is ISO 9001 certified. Support for product selection and network installation is given from catalogues and technical sheets covering drip, sprinkler and hydroponic systems through artificial-rain applications.
İzmi̇r · Menemen Plastik Ihtisas Organized Industrial Zone
Palaplast
Dripline Manufacturing
Irrigation Pipe & Hose ServicePaladrip embodied-emitter line is produced at 16 mm 2.0–3.4 l/h and 20 mm 1.8–7.4 l/h. Emitter spacing is 20–100 cm; coils are 100/300/400 m. The Menemen production centre runs PE dripline extrusion for agricultural irrigation together with the Greece-based product range.
İzmi̇r · Menemen Plastik Ihtisas Organized Industrial Zone
Palaplast
LDPE/HDPE Irrigation Pipe Manufacturing
Irrigation Pipe & Hose ServiceThe range includes LDPE DRIP-PAL 16–32 mm coils and HDPE 80/100 irrigation/potable pipes. Annual capacity exceeds 10,000 tonnes; more than 4,000 order codes cover agricultural irrigation, potable water and heating lines. The Türkiye production centre operates together with shipments to more than 70 countries.
İzmi̇r · Menemen Plastik Ihtisas Organized Industrial Zone
Pipelife Türkiye
ArılıLab Quality Control and Pipe Testing
Irrigation Pipe & Hose ServiceArılıLab is quality control integrated from raw-material verification to final inspection. Systematic testing supports traceability and alignment with potable water, wastewater, gas and agriculture standards. Drip, sprinkler and PE irrigation pipes on the Niğde line are produced under this laboratory discipline.
Ni̇ğde · Nigde Organized Industrial Zone
Pipelife Türkiye
Sprinkler Irrigation System Manufacturing
Irrigation Pipe & Hose ServiceClamped and latch sprinkler pipes are produced in PE 100, 5–6 m lengths, Ø50–200 mm and PN 4–10. The Turkish Patent Institute-approved clamped line is Ø75–160 mm. The system is supplied with latch or clamp joints for rapid field assembly and removal on field crops.
Ni̇ğde · Nigde Organized Industrial Zone
Pipelife Türkiye
Drip Irrigation Pipe Manufacturing
Irrigation Pipe & Hose ServiceThe Niğde OIZ plant extrudes flat drip lines with midi and micro emitters in thin/medium wall and heavy-wall lines with flat PC emitters. Subsurface PC flat drip is produced in 16 and 20 mm, 24 and 36 mil wall, 1.6, 2.1 and 3.4 l/h with anti-siphon emitters. Diameter, spacing and wall are selected for row-crop and orchard projects.
Ni̇ğde · Nigde Organized Industrial Zone
Topçuoğlu Plastik
PE Coil Irrigation Pipe Manufacturing
Irrigation Pipe & Hose ServiceThe Konya 2nd OIZ plant extrudes underground and above-ground PE coil irrigation pipe. Diameters run 20–110 mm with 6, 10 and 16 atm pressure classes; coil lengths are 50, 100 or 200 m by diameter. Black and blue lines are used for mains and in-field distribution.
Konya · Büyükkayacık Organized Industrial Zone
Topçuoğlu Plastik
Perforated and Plain Drip Pipe Production
Irrigation Pipe & Hose ServicePerforated drip pipe is produced at 16 mm with 0.9–1.2 mm wall and 2–8 l/h flow, and at 20 mm with 1.1 mm wall in 300 m coils. Plain round drip pipe covers 16–32 mm diameters and 150–400 m coils. Production includes emitter spacings from 20 to 100 cm.
Konya · Büyükkayacık Organized Industrial Zone
Topçuoğlu Plastik
Drip Irrigation Fitting Manufacturing
Irrigation Pipe & Hose ServiceThe plant manufactures drip irrigation fittings; the catalogue lists barb mini valves, gasket-outlet barb valves and threaded mini valves. Parts connect 16 mm and 20 mm drip lines to PE coil laterals. Injection-moulded valves are used in the field for shut-off and line splitting.
Konya · Büyükkayacık Organized Industrial Zone
Serdrip
Round drip pipe manufacturing
Irrigation Pipe & Hose ServiceThe round line covers 16/20 mm perforated and plain laterals. About also states millions of drip and sprinkler fittings are made in the same factory. SERDRİP, SERBORU and SERPIPE trademarks are used with these lines.
Konya · Büyükkayacık Organized Industrial Zone
Serdrip
Drip system installation and design
Irrigation Pipe & Hose ServiceThe homepage states they install systems using their drip components. The design section explains that lines, filters and pressure regulators are chosen by land, soil and crop. Installation uses pipe and fittings made at Büyükkayacık.
Konya · Büyükkayacık Organized Industrial Zone
Serdrip
Flat drip pipe manufacturing
Irrigation Pipe & Hose ServiceAbout states drip-pipe production started in 2007 and 40 million metres a year are made at the factory. The 17 and 22 mm flat pages give wall, coil length and 1.6–2.2 L/h tables. Production is at Büyükkayacık OSB, 516th Street No:5.
Konya · Büyükkayacık Organized Industrial Zone
Suppliers in This Category
18 suppliers
For buyers
Get quotes from Irrigation Pipe & Hose suppliers
Browse verified companies below or describe your need to collect multiple quotes in Irrigation Pipe & Hose quickly.
-
Verified profiles and certifications
-
Multiple quotes from one RFQ
-
Filter by capability and location
Featured Supplier Profiles
Capability, certification, and export profiles with enough suppliers in this category.
Serial Production — Irrigation Pipe & Hose manufacturers
22 approved suppliers
IndustryAgriculture — Irrigation Pipe & Hose suppliers
21 approved suppliers
Technical standardEN — Irrigation Pipe & Hose manufacturers
21 approved suppliers
MaterialHDPE — Irrigation Pipe & Hose manufacturers
19 approved suppliers
ProcessPrototype Production — Irrigation Pipe & Hose manufacturers
19 approved suppliers
Technical standardDIN — Irrigation Pipe & Hose manufacturers
19 approved suppliers
CapabilityPE Irrigation Pipe — Irrigation Pipe & Hose manufacturers
18 approved suppliers
MaterialPE (Polyethylene) — Irrigation Pipe & Hose manufacturers
18 approved suppliers
MaterialLDPE — Irrigation Pipe & Hose manufacturers
16 approved suppliers
CapabilityDrip Irrigation Pipe — Irrigation Pipe & Hose manufacturers
15 approved suppliers
CertificationISO 9001 certified Irrigation Pipe & Hose suppliers
15 approved suppliers
CertificationTSE certified Irrigation Pipe & Hose suppliers
14 approved suppliers
Featured Product Catalogs
Standard product types with enough suppliers in this category.
Featured Service Catalogs
Standard service types in this category that meet the supplier threshold.
Find the right supplier or list your company
Send RFQs as a buyer or publish your company profile in this category.