Hidroplastik
Kahramanmaraş · Dulkadi̇roğlu
Hidroplastik
Hidroplastik has manufactured drip, sprinkler and PE100 pipe in Dulkadiroğlu, Kahramanmaraş since 2010.
About
HİDRO PLASTİK SAN. VE TİC. A.Ş. started pipe production in 2010 in Dulkadiroğlu, Kahramanmaraş. In 2022 it was acquired by MAREN MARAŞ ELEKTRİK ÜRETİM SAN. VE TİC. A.Ş. (Mehmet Hanefi Öksüz / Kipaş Holding). The company supplies domestic and export markets from that mill.
Quality control runs from raw-material intake to the end of production. Finished pipes are tested in the in-house TÜRKAK-accredited laboratory to TSE methods; internationally valid test reports are issued with shipments.
Production profile
Company type
Activity types
Production capabilities
Machine park
Materials worked
Manufacturing processes
Technical standards
Certifications
Industries served
Activity categories
Factory gallery
Products
Pressure-compensating drip pipe
The drip page states Hidroplastik was first in Turkey to make pressure-regulated flat drip pipe. UV-filled PE is extruded in 16 mm and 20 mm; spacing is per order. PC emitters keep equal flow under pressure change. The homepage TSE scan cites TS EN ISO 9261, Ø16/20 mm, 350 kPa, 1.6 and 2.1 L/h.
PE 100 pipes
The PE 100 page states pipe is extruded by PN/SDR/MRS, with thinner wall than PE63/PE80 at the same PN. Uses: water/liquid lines, geothermal below 40 °C, food and other fluids. Diameters 20–800 mm; PN4–PN25.
Sprinkler irrigation pipes
The sprinkler page says water is delivered under pressure to sprinkler heads. HDPE pipe (site spelling HOPE) is produced at 5 bar, 6 m lengths. UV-stable, unbreakable, corrosion-resistant, light and easy to join. Also used on poorly drained land and to wash salt/dust near the sea.
Services
Drip irrigation pipe manufacturing
The drip page describes PC flat drip pipe extruded from UV PE in 16 and 20 mm. The TSE scan cites TS EN ISO 9261, 350 kPa, 1.6 and 2.1 L/h. Production is in Dulkadiroğlu; shipments follow TÜRKAK lab tests.
TÜRKAK-accredited pipe laboratory
The laboratory page says the lab was founded in 2022 for independent tests of pipes and raw materials. Basis: TS EN ISO/IEC 17025, TÜRKAK accreditation and periodic audits. About repeats that finished goods are TSE-tested in this lab.
Sprinkler and PE100 pipe manufacturing
The sprinkler line is published as 5 bar / 6 m HDPE; PE100 as 20–800 mm and PN4–PN25. About says QC runs from raw material to the last stage and every pipe is TSE-tested in the TÜRKAK lab. Shipments include internationally valid test reports.