Heat Exchangers

Tanpera Spiral Heat Exchangers provide reliable heat transfer for fluids with high solids content such as sludge, wastewater, pulp, high-viscosity hydrocarbons, and fiber-laden liquids. Channel height can be designed in the 6–50 mm range, suitable for continuous operation with dirty fluids. Single-piece or openable body options offer ease of maintenance and cleaning. Channels and body are typically AISI 304/316 stainless steel; duplex or special alloys are used for aggressive chemicals. Typical sectors are pulp and paper, wastewater heating, chemical processes, food production, and marine. Manufactured at the Gebze Free Zone facility.

İstanbul

Mektron Makine

Shell & Tube Heat Exchanger

Shell and tube heat exchangers are designed and manufactured for chemistry, petrochemistry, pharmaceutical, food, energy and water treatment. Heat transfer area ranges from 0.5 m² to 500 m² in single-pass, multi-pass, fixed tube sheet, floating head and U-tube layouts, including condenser and reboiler types. Materials include AISI 304, 316L, 316Ti, 904L, duplex/super duplex, carbon steel with stainless tubes, and titanium on request.

İstanbul

Top industrial zones

Manisa Organized Industrial Zone Mani̇sa 5 companies Beylikduzu Organized Industrial Zone İstanbul 4 companies Ikitelli Organized Industrial Zone İstanbul 2 companies Cerkezkoy Organized Industrial Zone Teki̇rdağ 2 companies

Products in This Category

Approved supplier product catalogs in this category.

Product type: 56 products

Adess Group

Heat Transfer Equipment

Teki̇rdağ · Ergene-1 Organized Industrial Zone

Tanpera A.Ş.

Gasketed Plate Heat Exchanger

Plate Heat Exchanger

İstanbul

Tanpera A.Ş.

Spiral Heat Exchangers

İstanbul

Mektron Makine

Shell & Tube Heat Exchanger

İstanbul

Konuk Isı Mak. San. ve Tic. Ltd. Şti.

Shell & Tube Heat Exchanger

A heat exchanger transfers heat between two fluids at different temperatures without mixing them. Konuk Isı manufactures shell-and-tube units to the customer drawing or to a custom design in TEMA and ASME Division VIII. Units can weigh up to 100 tonnes and run up to 25 m long, with a minimum tube diameter of 12 mm. Materials include carbon steel, stainless, duplex, special alloys (mostly 825 and 625), copper, brass and titanium. Design follows TEMA RCB, HEI, HTRI/HTFS thermal rating, API 660 and CFD on request. Typical tube diameters are 1/2", 3/4" and 1" with wall thickness from 1 to 2.6 mm. Tube-to-tubesheet joints are welded, expanded, or welded plus light expanding according to the material.

Teki̇rdağ · Velimese Organized Industrial Zone

Konuk Isı Mak. San. ve Tic. Ltd. Şti.

Air Cooled Heat Exchangers

Konuk Isı air-cooled heat exchangers are designed for severe service; each part is reviewed by engineering, welding and quality staff. The package comprises finned-tube bundles, fan stacks, driven axial fans and a steel structure; walkways and louvers can be added. L-fin wraps an aluminium strip in an L shape onto the tube, with a maximum operating temperature of 150 °C. Extruded B-fin aluminium tubes are rated to 300 °C and embedded G-fin to 400 °C. Welded bonnet headers have a maximum design pressure of about 100 bar; removable-cover headers allow cleaning and maintenance. Aluminium fins are light and corrosion resistant; galvanized steel tubes add mechanical toughness.

Teki̇rdağ · Velimese Organized Industrial Zone

Konuk Isı Mak. San. ve Tic. Ltd. Şti.

Closed Circuit Cooling Tower

In a closed-circuit cooling tower the process coolant flows through a galvanized, stainless or copper tube coil; spray water and axial fans reject the heat. Isolating the process fluid from ambient air keeps contaminants out and reduces cleaning. Coils are pneumatically leak-tested underwater at 15 bar to PED 97/23/EC and then hot-dip galvanized. The structure uses Z-725 g/m² hot-dip galvanized steel. Fans have adjustable extruded aluminium blades; motors are 1.1–45 kW, 4/6/8 pole, IP55–IP65, 400 V standard. Free-cooling in winter and inverter control of pumps and fans cut energy use.

Teki̇rdağ · Velimese Organized Industrial Zone

Refkar Soğutma ve Isı Transfer Cihazları San. ve Tic. Ltd. Şti.

RC Series Shell & Tube Evaporator

Refkar Shell & Tube evaporators are used in industrial and air-conditioning chillers. The RCS and RCD series offer cooling capacities from 20 kW to 1500 kW and are manufactured for high efficiency and low pressure drop under standard operating conditions. Custom production is available for seawater or brine service, units with a water reservoir tank, galvanized coating, special colours, fully stainless steel or mixed materials, and custom dimensions.

Kirklareli̇ · Kirklareli Organized Industrial Zone

Refkar Soğutma ve Isı Transfer Cihazları San. ve Tic. Ltd. Şti.

RK Series Shell & Tube Condenser

Refkar Shell & Tube condensers are used in industrial and comfort cooling units. The RK (RKC-RKS-RKT) series is manufactured for cooling capacities from 20 kW to 1680 kW under standard operating conditions, with high efficiency and low pressure drop. The RK series serves city-water and cooling-tower applications. RKDEW units are for fresh water; RKMDEW units are for seawater-cooled service.

Kirklareli̇ · Kirklareli Organized Industrial Zone

Refkar Soğutma ve Isı Transfer Cihazları San. ve Tic. Ltd. Şti.

RYL Series Oil Cooling Heat Exchanger

Oil cooling heat exchangers are produced for heat-transfer fluids, lubricating oils and cooling oils. Standard production covers four groups (RYL, RYG, RYS, RYSM) including fresh-water and seawater-cooled models. Standard oil exchangers are designed for a maximum 12 bar operating pressure, tested with 18 bar nitrogen, and can operate up to 120 °C. Design uses Unilab, HTRI, Siemens NX and mechanical TS EN 13445; custom units can be made for other pressures and temperatures.

Kirklareli̇ · Kirklareli Organized Industrial Zone

Barış Endüstriyel Enerji Sistemleri A.Ş.

Economizers

Economizers are energy recovery equipment designed to increase efficiency in industrial applications such as steam, hot water and thermal oil boilers. Waste heat in flue gases is recovered to reduce fuel consumption. Approximately every 21 °C drop in flue gas temperature means about 1% fuel savings.

Adana · Adana Haci Sabanci Organized Industrial Zone

Exper Makina Sanayi

EP3 Plate Heat Exchanger

Plate Heat Exchanger

EP3.010 is 395×626 mm DN65; EP3.022 395×956 mm DN65; EP3.033 395×1296 mm DN65. The plant is at Beylikdüzü OSB Birlik Sanayi Sitesi 2. Cadde No:40. Indoor area is 1,500 m² of 2,000 m² total; supply reaches more than 40 countries.

İstanbul · Beylikduzu Organized Industrial Zone

Services in This Category

Approved supplier service catalogs in this category.

Service type: 31 services

Tanpera A.Ş.

Plate Heat Exchanger Maintenance

Tanpera offers professional maintenance on site or in the workshop for every heat exchanger brand and model — especially Tanpera, Danfoss, and Sondex. The process covers plate disassembly, wear/scaling/deformation checks, chemical cleaning of plate surfaces, gasket renewal with original or compatible gaskets when needed, hanger-bar inspection and adjustment, and delivery after system tests. Plate, gasket, heating-element, and anode supply and replacement are part of the service offering. For clean fluids an annual inspection may suffice; for scale or biofilm risk, plate cleaning every 6–12 months is recommended.

İstanbul

Konuk Isı Mak. San. ve Tic. Ltd. Şti.

Custom Heat Exchanger Design and Fabrication

From the customer drawing or from a stated duty, Konuk Isı designs and builds custom heat exchangers to TEMA and ASME Division VIII. Materials are selected with the project team and consulting university staff according to the service. Shell expansion joints are sized to absorb thermal growth during heat transfer. SMAW, TIG and MAG-MIG welds are made by internationally certified welders; EN ISO 3834-2 welding qualification was obtained in 2016. A thermal test laboratory and HTRI/HTFS ratings support the design.

Teki̇rdağ · Velimese Organized Industrial Zone

Konuk Isı Mak. San. ve Tic. Ltd. Şti.

Turnkey Cooling Tower and Pump Station

Konuk Isı engineers design turnkey cooling towers and pump stations. Civil, architectural, structural, piping, mechanical installation and electrical drawings are prepared to the client specification. After approval come civil works; pumps, butterfly valves, plate exchangers, filters and foot valves; flow, temperature, pressure and level instruments; MCC, PLC and compensation panels and cabling. The plant is handed over after hydrostatic tests on piping, PLC automation and field motor/instrument checks.

Teki̇rdağ · Velimese Organized Industrial Zone

Refkar Soğutma ve Isı Transfer Cihazları San. ve Tic. Ltd. Şti.

Custom Heat Exchanger Design and Manufacturing

In addition to standard products, Refkar offers solutions customized to customer requirements in the refrigeration industry. Design and manufacturing can be adapted to technical and operational needs. Besides the standard series, heat exchangers can be produced for different pressures and temperatures. An engineering team supports project-specific solutions.

Kirklareli̇ · Kirklareli Organized Industrial Zone

Refkar Soğutma ve Isı Transfer Cihazları San. ve Tic. Ltd. Şti.

Plate Heat Exchanger Service

Besides manufacturing its own plate heat exchangers, Refkar also provides service for all brands and models. The scope of professional service is defined according to need so that the system can return to original performance. Gasketed plate exchangers are supported with maintenance and cleaning that keep operating costs low.

Kirklareli̇ · Kirklareli Organized Industrial Zone

Refkar Soğutma ve Isı Transfer Cihazları San. ve Tic. Ltd. Şti.

Custom Size and Material Evaporator Manufacturing

Beyond standard RC series Shell & Tube evaporators, production can be specified for seawater or brine, a water reservoir tank, galvanized coating and special colours. Fully stainless steel or mixed materials and custom dimensions are also available. The RF series can be built from 160 kW to 1750 kW with up to four independent circuits and a counterflow layout.

Kirklareli̇ · Kirklareli Organized Industrial Zone

Exper Makina Sanayi

Spare Parts Supply

Exchanger spare parts go to more than 40 countries with logistics from Italy, Russia and Europe offices. Parts are made in the Beylikdüzü plant. They are planned to customer demand; contact is +90 212 875 04 03.

İstanbul · Beylikduzu Organized Industrial Zone

Exper Makina Sanayi

Custom Heat Exchanger Design

Customised design solutions are provided for different sectors and almost all applications. Planning follows international standards. Units are sold globally under Exper PHE; the plant has 1,500 m² indoor.

İstanbul · Beylikduzu Organized Industrial Zone

Exper Makina Sanayi

Plate Heat Exchanger Manufacturing

Plate heat exchangers are made on 2,000 m² (1,500 m² indoor) in Beylikdüzü OSB. The site states a production and service journey of over forty years. The range is expanded each year from customer feedback; EP1–EP6 cover DN32–DN150.

İstanbul · Beylikduzu Organized Industrial Zone

Evapton Isıtma ve Soğutma

Consultancy, Design and Selection

Consultancy, design and selection is a service heading. A professional approach to OEM projects is stated. The office is Deposite A1. Equipment selection is this service. Production and dispatch are from İkitelli OSB, Başakşehir / Istanbul; published technical facts from the firm brief and website are used.

İstanbul · Ikitelli Organized Industrial Zone

Evapton Isıtma ve Soğutma

Heat-Exchanger Manufacturing

Shell&tube evaporators, condensers and exchangers are made. Delivery from stock or in a short time is stated. The plant is İkitelli Atatürk Oto Sanayi. Tubular exchangers are this service. Production and dispatch are from İkitelli OSB, Başakşehir / Istanbul; published technical facts from the firm brief and website are used.

İstanbul · Ikitelli Organized Industrial Zone

Gazi Soğutma Sanayi

Exchanger and Dry Cooler