Product description
More from this company
Sisdoz Arıtma ve Pompa Teknolojileri Sanayi ve Ticaret A.Ş.
Prodoz MPS Series Mechanical Diaphragm Dosing Pumps
General PumpsProdoz MPS series mechanically driven diaphragm dosing pumps with an electric motor are produced for chemical dosing applications. The series includes a mechanical lever for 0-100 percent stroke adjustment as standard, a corrosion-resistant all-plastic body, and suction and discharge accessories on PVC models. PVC and stainless steel liquid ends are available. Maximum capacity is 15.77 l/h, maximum pressure is 7 bar, and the supply is 220 V AC.
Kocaeli · Kocaeli Kobi Organized Industrial Zone
Sisdoz Arıtma ve Pompa Teknolojileri Sanayi ve Ticaret A.Ş.
Argal Route Series Mechanically Sealed Centrifugal Pumps
Centrifugal PumpArgal Route ZMR series centrifugal pumps with mechanical seals are supplied for chemical transfer. The range comprises 13 models with E-CTFE or PP bodies and threaded, flanged or union connections. Maximum flow is 50 m3/h and maximum head is 40 m. PP models operate up to 80 degrees and E-CTFE models up to 100 degrees.
Kocaeli · Kocaeli Kobi Organized Industrial Zone
Related products
General Kazan
Hot Water Boiler
Process Equipment ProductThe hot water boiler comes online in a short time and is described as raising boiler efficiency. It is a three-pass, counter-pressure boiler with a large furnace in which the flame reverses. It can be fitted with an eco panel and a three-way valve that set the flow temperature from the outdoor temperature. The manufacturer lists apartments, hotels, hospitals and factories as heating uses. It is built as an industrial boiler for gas, liquid or solid fuel according to the site’s heat capacity and temperature need.
Aksaray
General Kazan
Thermal Oil Boiler
Process Equipment ProductThermal oil boilers raise temperature up to 300°C at atmospheric pressure. Thermal oil is the heat carrier in the system. It does not leave sediment, does not form scale and does not cause corrosion, and it needs no conditioning. Under normal climate the circuit does not freeze in winter. The set temperature can be adjusted up to 300°C. Besides high-temperature duty, the boiler can also be used when steam, superheated water or hot water has to be produced.
Aksaray
Ensotek CTP Su Soğutma Kuleleri Mühendislik San. Tic. Ltd. Şti.
Open-Circuit FRP Cooling Tower
Process Equipment ProductThese units are called open-circuit cooling towers because the water taken into the tower is cooled by direct contact with ambient air. Ensotek manufactures FRP package water cooling towers from 1 m³/h up to capacities of thousands of cubic metres per hour. Package towers are modular: models that fit a truck or container are shipped assembled from the factory; larger units are shipped knocked down and erected on site with a supervisor. Single-cell and multi-cell versions are available. On multi-cell towers the number of fans and water inlets equals the number of cells, and the electrical and water lines are separate so capacity can be staged. The casing is glass-fibre reinforced polyester, with a UV-resistant gel-coat outside and paraffin polyester inside. The structure uses pultruded FRP profiles. The fan is axial, with a gearbox on larger diameters. Fill is selected as PP trickle, PVC film or splash grid. Fasteners are AISI 304 stainless steel. The towers are counter-flow, induced-draft type.
İstanbul
Ensotek CTP Su Soğutma Kuleleri Mühendislik San. Tic. Ltd. Şti.
Closed-Circuit Cooling Tower
Process Equipment ProductClosed-circuit cooling towers are used where the process needs clean water that must stay free of contamination. The water that must remain clean is cooled as it passes through the coils inside the tower. Hot water flows inside the metal tubes while air drawn by the fan and the tower spray water cool the fluid through the tube wall. There is no evaporation loss from the clean circuit; the spray water circulating in the tower does evaporate and must be made up. Ensotek manufactures closed-circuit water cooling towers with galvanized steel tube or, when required, stainless tube cooling coils. They supply cold water to processes such as air compressors, induction furnaces and chiller groups. Coil fabrication is done at the Ankara factory in hot-dip galvanized or stainless steel. The range includes CC CTP and CC DCTP models.
İstanbul