Product description
More from this company
General Kazan
Scotch Type Steam Boiler
Steam BoilerThe Scotch steam boiler is a three-pass unit. Flame and flue gas from combustion travel across sufficient heating surfaces so that maximum heat transfer is achieved before the gas leaves to the stack without low-temperature corrosion, giving high boiler efficiency. It responds to sudden steam draws. It has a wide evaporation surface, steam volume and a large corrugated furnace. After manufacture it is hydraulically tested at the pressure calculated by the standard. Smoke tubes are reached from the front doors, the furnace from the large rear explosion door, and the water side from the manhole and at least two hand holes. The design is high-pressure, fire-tube and cylindrical, to TS EN 12953, TRD, DIN and EN. Shell, tube plates and furnace are P265GH or P355GH boiler plate to EN 10028; smoke tubes are boiler tube to EN 10216 or EN 10217.
Aksaray
General Kazan
Hot Water Boiler
Process Equipment ProductThe hot water boiler comes online in a short time and is described as raising boiler efficiency. It is a three-pass, counter-pressure boiler with a large furnace in which the flame reverses. It can be fitted with an eco panel and a three-way valve that set the flow temperature from the outdoor temperature. The manufacturer lists apartments, hotels, hospitals and factories as heating uses. It is built as an industrial boiler for gas, liquid or solid fuel according to the site’s heat capacity and temperature need.
Aksaray
Related products
Sisdoz Arıtma ve Pompa Teknolojileri Sanayi ve Ticaret A.Ş.
Proair PL Series Roots Blowers
Process Equipment ProductProair PL series roots blowers are produced for air supply with a cast-steel body lubricated on both sides and a dynamically balanced lobe design. They are coupled to the electric motor by belt and pulley, and the low noise level is supported by acoustic enclosures. Maximum flow is 20,000 m3/h and maximum pressure is 1200 mbar.
Kocaeli · Kocaeli Kobi Organized Industrial Zone
Ensotek CTP Su Soğutma Kuleleri Mühendislik San. Tic. Ltd. Şti.
Open-Circuit FRP Cooling Tower
Process Equipment ProductThese units are called open-circuit cooling towers because the water taken into the tower is cooled by direct contact with ambient air. Ensotek manufactures FRP package water cooling towers from 1 m³/h up to capacities of thousands of cubic metres per hour. Package towers are modular: models that fit a truck or container are shipped assembled from the factory; larger units are shipped knocked down and erected on site with a supervisor. Single-cell and multi-cell versions are available. On multi-cell towers the number of fans and water inlets equals the number of cells, and the electrical and water lines are separate so capacity can be staged. The casing is glass-fibre reinforced polyester, with a UV-resistant gel-coat outside and paraffin polyester inside. The structure uses pultruded FRP profiles. The fan is axial, with a gearbox on larger diameters. Fill is selected as PP trickle, PVC film or splash grid. Fasteners are AISI 304 stainless steel. The towers are counter-flow, induced-draft type.
İstanbul
Ensotek CTP Su Soğutma Kuleleri Mühendislik San. Tic. Ltd. Şti.
Closed-Circuit Cooling Tower
Process Equipment ProductClosed-circuit cooling towers are used where the process needs clean water that must stay free of contamination. The water that must remain clean is cooled as it passes through the coils inside the tower. Hot water flows inside the metal tubes while air drawn by the fan and the tower spray water cool the fluid through the tube wall. There is no evaporation loss from the clean circuit; the spray water circulating in the tower does evaporate and must be made up. Ensotek manufactures closed-circuit water cooling towers with galvanized steel tube or, when required, stainless tube cooling coils. They supply cold water to processes such as air compressors, induction furnaces and chiller groups. Coil fabrication is done at the Ankara factory in hot-dip galvanized or stainless steel. The range includes CC CTP and CC DCTP models.
İstanbul
Ekotek Isı Teknolojileri
Albatros Series Liquid/Gas Fired Thermal Oil Boiler
Process Equipment ProductThe Albatros Series liquid/gas-fired thermal oil boiler runs at high temperature and low pressure for reactors, dryers, presses and exchangers. Heat output is 116–34,900 kW with operating temperature 60–450 °C. Vertical 3-pass coil design uses EN 10216-2 P235GH steel tubes. Fuels include LNG, propane, natural gas, LPG, biogas, hydrogen, diesel and fuel oil; PN40 flanged oil connections and digital temperature control are fitted, with optional PLC/HMI and Modbus monitoring.
Aydın · Aydin ASTIM Organized Industrial Zone