Product description
More from this company
Sisdoz Arıtma ve Pompa Teknolojileri Sanayi ve Ticaret A.Ş.
Argal Route Series Mechanically Sealed Centrifugal Pumps
Centrifugal PumpArgal Route ZMR series centrifugal pumps with mechanical seals are supplied for chemical transfer. The range comprises 13 models with E-CTFE or PP bodies and threaded, flanged or union connections. Maximum flow is 50 m3/h and maximum head is 40 m. PP models operate up to 80 degrees and E-CTFE models up to 100 degrees.
Kocaeli · Kocaeli Kobi Organized Industrial Zone
Sisdoz Arıtma ve Pompa Teknolojileri Sanayi ve Ticaret A.Ş.
Proair PL Series Roots Blowers
Process Equipment ProductProair PL series roots blowers are produced for air supply with a cast-steel body lubricated on both sides and a dynamically balanced lobe design. They are coupled to the electric motor by belt and pulley, and the low noise level is supported by acoustic enclosures. Maximum flow is 20,000 m3/h and maximum pressure is 1200 mbar.
Kocaeli · Kocaeli Kobi Organized Industrial Zone
Related products
İzpom
Flygt Original Spare Parts
General PumpsİZPOM supplies Flygt mechanical seals, impellers, wear rings, O-rings, bearings and basic repair kits as 100 percent original Xylem parts. Plug-in and Griploc seal kits keep water out of the motor housing, while N-technology cast, Hard-Iron or stainless impellers preserve non-clogging and hydraulic efficiency. Repair kits, seals and impellers are held at the Kemalpaşa warehouse; parts not in stock are imported from the Xylem Europe logistics centre. Orders use the model number, serial number and part number on the pump nameplate.
İzmir
Etna Pompa (alp Pompa Teknolojileri Tic. ve San. A.ş.)
ECP 25 Series Wet Rotor Circulation Pump
General PumpsFrequency-controlled wet rotor circulation pumps compliant with the ecodesign-ErP 2009/125/EC directive, used to circulate hot water in heating systems. Factory settings usually allow commissioning without extra adjustment, they run with low system noise and consume less energy than conventional 3-speed circulators. Maximum flow 12 m³/h, maximum head 12 mWC, port-to-port length 130-180 mm, union size 1 ½", pipe size 1". A stainless steel body (N) version is also available.
İstanbul · Dudullu Organized Industrial Zone
Koştaş Tarım Makinaları Ltd.
Koştaş A3 - 3-Piston Sprayer Pump
General PumpsThe Koştaş A3 is a 3-piston spraying (sprayer) pump offered under the Toros brand. It is part of the Piston Sprayer Pumps range alongside the A12, A33, A7, A77 and C3 models. All of the pump's spare parts, such as crankshaft, connecting rod, guide piston, chrome piston, seals, valves and regulator, are supplied separately by Koştaş with part numbers.
Antalya
Pumpport Pompa ve Makina Sanayi
PP Series Plastic Air-Operated Diaphragm Pump
General PumpsPP Series plastic diaphragm pumps, with polypropylene bodies and air-operated drive, are used to transfer acids, bases, solvents and corrosive liquids. They offer connections from 1/4" to 3" and a capacity range of 16 to 894 litres/minute (PP 02 – PP 30). With a maximum working pressure of 7 bar and 100 °C temperature tolerance they are preferred in chemical, paint, coating and wastewater sectors. Six elastomer options including Santoprene, Neoprene, EPDM, FKM and PTFE are available; ATEX-compliant models can be supplied.
İstanbul · Ikitelli Organized Industrial Zone