Product description

Nitrile rubber (NBR) O-rings are produced for standard duty between -40 °C and +100 °C; 70 Shore A is one of the preferred hardness grades. O-rings are sealing elements designed for static work in hydraulic and pneumatic systems, and they are widely used because of their simple design, very wide size range and double-acting dynamic capability. Where there is no extrusion gap, the stated static pressure for 70 Shore A is 160 bar. For low dynamic pressures such as a pneumatic cylinder or valve stem, 63 bar is recommended for 70 Shore A. The size table lists CAN NO codes and groove dimensions (for example CO-01000015, 1.5 x 1 mm).

More from this company

FKM 75 Shore O-Ring — Can Sızdırmazlık Elemanları San. ve Tic. Ltd. Şti.

Can Sızdırmazlık Elemanları San. ve Tic. Ltd. Şti.

FKM 75 Shore O-Ring

O-Rings Product

Fluorocarbon rubber (FKM) O-rings are produced for standard duty between -25 °C and +220 °C, with 75 Shore A the preferred hardness. O-rings are sealing elements designed for static duty in hydraulic and pneumatic systems and are widely used because of simple design, a wide size range and double-acting dynamic operation. Best performance requires correct sizing, the right material and proper metal surface quality. The tables give 160 bar for static duty and 63 bar for low dynamic pressures such as a pneumatic cylinder or valve stem, according to hardness. CAN NO codes begin with CO FKM-; an example size is 1.5 x 1 mm (CO FKM-01000015), with the matching groove depths.

İstanbul · Ikitelli Organized Industrial Zone

Teflon O-Ring — Can Sızdırmazlık Elemanları San. ve Tic. Ltd. Şti.

Can Sızdırmazlık Elemanları San. ve Tic. Ltd. Şti.

Teflon O-Ring

PTFE O-Ring Product

Teflon O-rings are described by high heat resistance, high resistance to chemicals and solvents, electrical conductivity close to zero, a low coefficient of friction, a non-stick property and suitability for food contact. The PTFE Teflon O-ring temperature range is given as -200 °C at the low end and +260 °C at the high end. Production is possible across a wide size range from 8.00 mm to 400.00 mm. O-rings are sealing elements designed for static duty in hydraulic and pneumatic systems; sizing, material selection and metal surface quality determine working performance.

İstanbul · Ikitelli Organized Industrial Zone

Related products

NBR O-Ring — Artı Kauçuk

Artı Kauçuk

NBR O-Ring

O-Rings Product

The NBR O-ring is a nitrile rubber sealing element used against oil and fuel leakage. Nitrile rubber seals against oil and fuels and can operate up to +100 °C; ozone resistance is low. It is used in static and dynamic duty. Applications include hydraulic systems, pneumatic systems, liquid and gas systems, aerospace and medical technologies. Parts are made from rubber and can be produced in standard sizes or in custom sizes on request. The catalog lists 70 Shore A sizes; the 2.8x0.5 mm NBR O-ring has a minimum order quantity of 5,000 pieces.

Bursa

Viton O-Ring — Artı Kauçuk

Artı Kauçuk

Viton O-Ring

O-Rings Product

The Viton O-ring is a rubber sealing element resistant to high temperature and aggressive chemicals. It can operate up to +260 °C, resists oil, solvents and fuels, and has high ozone resistance. It seals at connection points. Uses include hydraulic and pneumatic systems, liquid and gas systems, aerospace, medical technologies and high-temperature service. It can be produced in custom sizes on request. Catalog examples are 70 Shore A, with a minimum order quantity of 1,000 pieces.

Bursa

O-Rings — Gökhan Kauçuk

Gökhan Kauçuk

O-Rings

O-Rings Product

An O-ring is an elastomeric sealing element with a circular cross-section. It is used in static and dynamic applications to stop fluid, gas or dust leakage between two surfaces. Gökhan Kauçuk offers O-rings in NBR, FKM (Viton), EPDM, silicone, HNBR, FFKM and PU. NBR is listed for oil, grease and fuel at -30°C / +100°C; FKM for acid, solvent and fuel at -20°C / +200°C; EPDM for water, steam and brake fluid at -40°C / +130°C. The material table also lists silicone at -50°C / +200°C, HNBR at -40°C / +150°C, FFKM at -20°C / +320°C and PU at -30°C / +90°C. Sizes follow DIN 3771, AS568, ISO 3601 and BS, and are supplied from stock or as custom production by inside diameter, outside diameter and cross-section.

Ankara · Ivedik Organized Industrial Zone

O-Rings — Eray Sızdırmazlık Elemanları Makine Sanayi ve Ticaret Ltd. Şti.

Eray Sızdırmazlık Elemanları Makine Sanayi ve Ticaret Ltd. Şti.

O-Rings

O-Rings Product

The O-ring stock covers the diameters needed in a 1 mm–13 mm cross-section range for applications that require resistance to pressure, heat, friction and chemicals. Stock types are 70 Shore NBR, 90 Shore NBR for high pressure, 75 Shore Viton for high temperature and aggressive chemicals, 70 Shore silicone for a wide temperature range and food use, and EPDM for water, steam and brake fluid. The O-rings are supplied in Italian Gapi quality; non-standard sizes are filled through domestic and overseas partners.

Ankara · OSTIM Organized Industrial Zone

Ready to Find Your Next Manufacturing Partner?

Explore Turkish manufacturers and industrial suppliers on TurkIndustry. Discover potential sourcing partners, submit RFQs and compare quotations — all from one platform.

Start Sourcing Today →