Can Sızdırmazlık Elemanları San. ve Tic. Ltd. Şti.
With 26 years of industry experience and designs based on advanced technology, we produce solutions for your needs.
About
Production profile
Company type
Activity types
Production capabilities
Materials worked
Activity categories
Map
Location is approximate, based on the address. · © OpenStreetMap
Factory gallery
Products
FKM 75 Shore O-Ring
Fluorocarbon rubber (FKM) O-rings are produced for standard duty between -25 °C and +220 °C, with 75 Shore A the preferred hardness. O-rings are sealing elements designed for static duty in hydraulic and pneumatic systems and are widely used because of simple design, a wide size range and double-acting dynamic operation. Best performance requires correct sizing, the right material and proper metal surface quality. The tables give 160 bar for static duty and 63 bar for low dynamic pressures such as a pneumatic cylinder or valve stem, according to hardness. CAN NO codes begin with CO FKM-; an example size is 1.5 x 1 mm (CO FKM-01000015), with the matching groove depths.
NBR 70 Shore O-Ring
Nitrile rubber (NBR) O-rings are produced for standard duty between -40 °C and +100 °C; 70 Shore A is one of the preferred hardness grades. O-rings are sealing elements designed for static work in hydraulic and pneumatic systems, and they are widely used because of their simple design, very wide size range and double-acting dynamic capability. Where there is no extrusion gap, the stated static pressure for 70 Shore A is 160 bar. For low dynamic pressures such as a pneumatic cylinder or valve stem, 63 bar is recommended for 70 Shore A. The size table lists CAN NO codes and groove dimensions (for example CO-01000015, 1.5 x 1 mm).
Teflon O-Ring
Teflon O-rings are described by high heat resistance, high resistance to chemicals and solvents, electrical conductivity close to zero, a low coefficient of friction, a non-stick property and suitability for food contact. The PTFE Teflon O-ring temperature range is given as -200 °C at the low end and +260 °C at the high end. Production is possible across a wide size range from 8.00 mm to 400.00 mm. O-rings are sealing elements designed for static duty in hydraulic and pneumatic systems; sizing, material selection and metal surface quality determine working performance.
Services
Imported O-Rings and Hydraulic-Pneumatic Seals
CAN SIZDIRMAZLIK ELEMANLARI SAN. VE TİC. LTD. ŞTİ. meets sealing-element needs, with 26 years of industry experience, through imported O-rings, hydraulic sealing elements and pneumatic sealing elements. The product groups on the site are O-rings, hydraulic seals, pneumatic seals, bearing elements, wiper seals, static seals, hydraulic rotary seals, PTFE spring-loaded seals, pressure-wash seals, rotary-shaft wipers and rotary-shaft seals. The stated mission is to meet Turkish industry’s need for sealing elements with a high quality-to-price ratio, innovative production capacity and a wide product range.
O-Ring Production for Special Conditions
Production can be matched to special places of use and conditions. Standard production is stated as suitable for NBR from -40 °C to +100 °C, FKM from -25 °C to +220 °C, silicone rubber (MVQ) from -60 °C to +200 °C, EPDM from -50 °C to +125 °C, polyurethane (PU) from -40 °C to +80 °C and HNBR from -40 °C to +150 °C. Preferred hardness is 70 Sh and 90 Sh for NBR and PU, 75 Sh for FKM, and 70 Sh for MVQ, EPDM and HNBR. PTFE-coated O-rings can be produced from 20.00 mm to 200.00 mm, and Teflon O-rings from 8.00 mm to 400.00 mm.
Custom Sealing Design
Can Sızdırmazlık produces solutions for sealing-element needs with 26 years of industry experience and designs based on advanced technology. Best O-ring performance requires correct sizing, the right material and the correct quality of the metal surfaces. Dynamic applications need a better surface than static duty: Rmax ≤ 4 μm on a dynamic cylinder, ≤ 2 μm on the rod, and ≤ 6–1.2 μm on the groove base; on a static sealing face Rmax ≤ 10 μm and on the groove base ≤ 25 μm. For static pressure, tolerances must be chosen so that an extrusion gap does not open.