Product description

Teflon O-rings are described by high heat resistance, high resistance to chemicals and solvents, electrical conductivity close to zero, a low coefficient of friction, a non-stick property and suitability for food contact. The PTFE Teflon O-ring temperature range is given as -200 °C at the low end and +260 °C at the high end. Production is possible across a wide size range from 8.00 mm to 400.00 mm. O-rings are sealing elements designed for static duty in hydraulic and pneumatic systems; sizing, material selection and metal surface quality determine working performance.

More from this company

NBR 70 Shore O-Ring — Can Sızdırmazlık Elemanları San. ve Tic. Ltd. Şti.

Can Sızdırmazlık Elemanları San. ve Tic. Ltd. Şti.

NBR 70 Shore O-Ring

O-Rings Product

Nitrile rubber (NBR) O-rings are produced for standard duty between -40 °C and +100 °C; 70 Shore A is one of the preferred hardness grades. O-rings are sealing elements designed for static work in hydraulic and pneumatic systems, and they are widely used because of their simple design, very wide size range and double-acting dynamic capability. Where there is no extrusion gap, the stated static pressure for 70 Shore A is 160 bar. For low dynamic pressures such as a pneumatic cylinder or valve stem, 63 bar is recommended for 70 Shore A. The size table lists CAN NO codes and groove dimensions (for example CO-01000015, 1.5 x 1 mm).

İstanbul · Ikitelli Organized Industrial Zone

FKM 75 Shore O-Ring — Can Sızdırmazlık Elemanları San. ve Tic. Ltd. Şti.

Can Sızdırmazlık Elemanları San. ve Tic. Ltd. Şti.

FKM 75 Shore O-Ring

O-Rings Product

Fluorocarbon rubber (FKM) O-rings are produced for standard duty between -25 °C and +220 °C, with 75 Shore A the preferred hardness. O-rings are sealing elements designed for static duty in hydraulic and pneumatic systems and are widely used because of simple design, a wide size range and double-acting dynamic operation. Best performance requires correct sizing, the right material and proper metal surface quality. The tables give 160 bar for static duty and 63 bar for low dynamic pressures such as a pneumatic cylinder or valve stem, according to hardness. CAN NO codes begin with CO FKM-; an example size is 1.5 x 1 mm (CO FKM-01000015), with the matching groove depths.

İstanbul · Ikitelli Organized Industrial Zone

Related products

Ready to Find Your Next Manufacturing Partner?

Explore Turkish manufacturers and industrial suppliers on TurkIndustry. Discover potential sourcing partners, submit RFQs and compare quotations — all from one platform.

Start Sourcing Today →