Product description
More from this company
Gökhan Kauçuk
Bonded Seal
Gaskets ProductA bonded seal has an elastomer seal at the centre and a metal ring reinforcing the outside. It is used on bolt, screw and flange joints and is chosen for high pressure and temperature in hydraulic and pneumatic systems. It is also called a metal-supported seal, reinforced seal, washer seal and BS seal. NBR is listed for mineral oil and grease at -30°C / +100°C, FKM for fuel and solvent at -20°C / +200°C, and EPDM for water, steam and outdoor use at -40°C / +130°C. Sizes follow DIN 7603, BS 4518 and ISO 3601 for diameter and thickness, and are stocked in inch and metric. Standard, self-centering and custom-made types are offered.
Ankara · Ivedik Organized Industrial Zone
Gökhan Kauçuk
Hydraulic Rod and Piston Seals
General SealsHydraulic seals are used to keep hydraulic systems tight and to limit pressure loss. Gökhan Kauçuk lists rod, piston and combined seals. Rod seals stop fluid leakage at the moving parts of a hydraulic cylinder; the page groups high-strength, low-friction, packing, pre-pressure ring and heavy-duty rod seals, including profiles such as XT200, FR200, K33 and K01. Piston seals keep pressurised fluid from leaking in one direction so the cylinder can move; compact piston sets, piston packings and heavy-duty piston seals include profiles such as K516, K518 and K18. Combined piston-rod seals and X-rings are listed in the same product group.
Ankara · Ivedik Organized Industrial Zone
Related products
Artı Kauçuk
NBR O-Ring
O-Rings ProductThe NBR O-ring is a nitrile rubber sealing element used against oil and fuel leakage. Nitrile rubber seals against oil and fuels and can operate up to +100 °C; ozone resistance is low. It is used in static and dynamic duty. Applications include hydraulic systems, pneumatic systems, liquid and gas systems, aerospace and medical technologies. Parts are made from rubber and can be produced in standard sizes or in custom sizes on request. The catalog lists 70 Shore A sizes; the 2.8x0.5 mm NBR O-ring has a minimum order quantity of 5,000 pieces.
Bursa
Artı Kauçuk
Viton O-Ring
O-Rings ProductThe Viton O-ring is a rubber sealing element resistant to high temperature and aggressive chemicals. It can operate up to +260 °C, resists oil, solvents and fuels, and has high ozone resistance. It seals at connection points. Uses include hydraulic and pneumatic systems, liquid and gas systems, aerospace, medical technologies and high-temperature service. It can be produced in custom sizes on request. Catalog examples are 70 Shore A, with a minimum order quantity of 1,000 pieces.
Bursa
Can Sızdırmazlık Elemanları San. ve Tic. Ltd. Şti.
NBR 70 Shore O-Ring
O-Rings ProductNitrile rubber (NBR) O-rings are produced for standard duty between -40 °C and +100 °C; 70 Shore A is one of the preferred hardness grades. O-rings are sealing elements designed for static work in hydraulic and pneumatic systems, and they are widely used because of their simple design, very wide size range and double-acting dynamic capability. Where there is no extrusion gap, the stated static pressure for 70 Shore A is 160 bar. For low dynamic pressures such as a pneumatic cylinder or valve stem, 63 bar is recommended for 70 Shore A. The size table lists CAN NO codes and groove dimensions (for example CO-01000015, 1.5 x 1 mm).
İstanbul · Ikitelli Organized Industrial Zone
Can Sızdırmazlık Elemanları San. ve Tic. Ltd. Şti.
FKM 75 Shore O-Ring
O-Rings ProductFluorocarbon rubber (FKM) O-rings are produced for standard duty between -25 °C and +220 °C, with 75 Shore A the preferred hardness. O-rings are sealing elements designed for static duty in hydraulic and pneumatic systems and are widely used because of simple design, a wide size range and double-acting dynamic operation. Best performance requires correct sizing, the right material and proper metal surface quality. The tables give 160 bar for static duty and 63 bar for low dynamic pressures such as a pneumatic cylinder or valve stem, according to hardness. CAN NO codes begin with CO FKM-; an example size is 1.5 x 1 mm (CO FKM-01000015), with the matching groove depths.
İstanbul · Ikitelli Organized Industrial Zone