Product description
More from this company
Adess Group
Pressure Vessels & Columns
Pressure Vessels ProductCustom-built pressure vessels, columns and towers — from large-scale process towers to reactors, separators and storage vessels, designed to international standards. ADESS GROUP provides solutions for key process equipment, ranging from large-scale towers and columns to various types of pressure vessels. Fabrication follows ASME Section VIII Division 1, API standards (API 650, API 660, etc.), PED 2014/68/EU and CE requirements, in atmospheric, low-pressure and high-pressure designs. Project requirements can include radiographic testing up to 100%, PMI, pickling and passivation, heat treatment and stress relieving, internal pipe coils, pressure-vessel mechanical design software and AutoCAD Mechanical. Materials include carbon steel, stainless steel, nickel alloys, copper alloys and duplex and super duplex.
Tekirdağ · Ergene-1 Organized Industrial Zone
Adess Group
Heat Transfer Equipment
General Heat ExchangersShell and tube heat exchangers, water bath heaters and air-cooled heat exchangers (ACHE) for oil and gas, petrochemical, power and industrial applications. Equipment is designed according to process conditions such as pressure, temperature, flow rate and required thermal performance. Fabrication includes TEMA R, C and B class designs, ASME Section VIII Div. 1 plus U Stamp, PED 2014/68/EU and CE, shell-and-tube, U-tube and fixed tubesheet types, tube-to-tubesheet expansion and welding, HTRI thermal and hydraulic design software, and pickling and passivation with citric, nitric and phosphoric acid. Shell-and-tube units are offered as fixed tubesheet, floating tubesheet and U-tube; water bath heaters heat natural gas and other process fluids indirectly; ACHE units can be designed to ASME and API 661 with finned or bare tube bundles, plug or cover-plate headers and fan and drive systems. Materials include carbon steel, stainless steel, nickel alloys, copper alloys and duplex and super duplex.
Tekirdağ · Ergene-1 Organized Industrial Zone
Related products
Sisdoz Arıtma ve Pompa Teknolojileri Sanayi ve Ticaret A.Ş.
Proair PL Series Roots Blowers
Process Equipment ProductProair PL series roots blowers are produced for air supply with a cast-steel body lubricated on both sides and a dynamically balanced lobe design. They are coupled to the electric motor by belt and pulley, and the low noise level is supported by acoustic enclosures. Maximum flow is 20,000 m3/h and maximum pressure is 1200 mbar.
Kocaeli · Kocaeli Kobi Organized Industrial Zone
General Kazan
Hot Water Boiler
Process Equipment ProductThe hot water boiler comes online in a short time and is described as raising boiler efficiency. It is a three-pass, counter-pressure boiler with a large furnace in which the flame reverses. It can be fitted with an eco panel and a three-way valve that set the flow temperature from the outdoor temperature. The manufacturer lists apartments, hotels, hospitals and factories as heating uses. It is built as an industrial boiler for gas, liquid or solid fuel according to the site’s heat capacity and temperature need.
Aksaray
General Kazan
Thermal Oil Boiler
Process Equipment ProductThermal oil boilers raise temperature up to 300°C at atmospheric pressure. Thermal oil is the heat carrier in the system. It does not leave sediment, does not form scale and does not cause corrosion, and it needs no conditioning. Under normal climate the circuit does not freeze in winter. The set temperature can be adjusted up to 300°C. Besides high-temperature duty, the boiler can also be used when steam, superheated water or hot water has to be produced.
Aksaray
Ensotek CTP Su Soğutma Kuleleri Mühendislik San. Tic. Ltd. Şti.
Open-Circuit FRP Cooling Tower
Process Equipment ProductThese units are called open-circuit cooling towers because the water taken into the tower is cooled by direct contact with ambient air. Ensotek manufactures FRP package water cooling towers from 1 m³/h up to capacities of thousands of cubic metres per hour. Package towers are modular: models that fit a truck or container are shipped assembled from the factory; larger units are shipped knocked down and erected on site with a supervisor. Single-cell and multi-cell versions are available. On multi-cell towers the number of fans and water inlets equals the number of cells, and the electrical and water lines are separate so capacity can be staged. The casing is glass-fibre reinforced polyester, with a UV-resistant gel-coat outside and paraffin polyester inside. The structure uses pultruded FRP profiles. The fan is axial, with a gearbox on larger diameters. Fill is selected as PP trickle, PVC film or splash grid. Fasteners are AISI 304 stainless steel. The towers are counter-flow, induced-draft type.
İstanbul