Ensotek CTP Su Soğutma Kuleleri Mühendislik San. Tic. Ltd. Şti.
Manufactures open- and closed-circuit FRP package cooling towers and evaporative condensers, and supplies maintenance, spare parts and water treatment.
About
Production profile
Company type
Activity types
Production capabilities
Materials worked
Certifications
Export profile
Industries served
Activity categories
Target export markets
Map
Location is approximate, based on the address. · © OpenStreetMap
Factory gallery
Products
Open-Circuit FRP Cooling Tower
These units are called open-circuit cooling towers because the water taken into the tower is cooled by direct contact with ambient air. Ensotek manufactures FRP package water cooling towers from 1 m³/h up to capacities of thousands of cubic metres per hour. Package towers are modular: models that fit a truck or container are shipped assembled from the factory; larger units are shipped knocked down and erected on site with a supervisor. Single-cell and multi-cell versions are available. On multi-cell towers the number of fans and water inlets equals the number of cells, and the electrical and water lines are separate so capacity can be staged. The casing is glass-fibre reinforced polyester, with a UV-resistant gel-coat outside and paraffin polyester inside. The structure uses pultruded FRP profiles. The fan is axial, with a gearbox on larger diameters. Fill is selected as PP trickle, PVC film or splash grid. Fasteners are AISI 304 stainless steel. The towers are counter-flow, induced-draft type.
Evaporative Condenser
An evaporative condenser is a heat exchanger that condenses refrigerant vapour to liquid in a cooling system. Refrigerant circulates inside the coil, water is sprayed onto the coil, a fan moves air across it and heat is rejected by evaporation. Ensotek designs and manufactures project-specific evaporative condensers according to capacity, ambient temperature and humidity, refrigerant type and water quality. Applications include ammonia and freon refrigeration, chiller groups, process cooling, power plants, cold stores and food plants. The casing can be galvanized or stainless steel, and the heat-transfer surface is a coil.
Closed-Circuit Cooling Tower
Closed-circuit cooling towers are used where the process needs clean water that must stay free of contamination. The water that must remain clean is cooled as it passes through the coils inside the tower. Hot water flows inside the metal tubes while air drawn by the fan and the tower spray water cool the fluid through the tube wall. There is no evaporation loss from the clean circuit; the spray water circulating in the tower does evaporate and must be made up. Ensotek manufactures closed-circuit water cooling towers with galvanized steel tube or, when required, stainless tube cooling coils. They supply cold water to processes such as air compressors, induction furnaces and chiller groups. Coil fabrication is done at the Ankara factory in hot-dip galvanized or stainless steel. The range includes CC CTP and CC DCTP models.
Services
Rental Cooling Tower
Rental cooling towers cover short-term cooling when an existing tower fails, during planned maintenance, for temporary capacity increases, seasonal production, chiller or process-cooling support, and commissioning of a new plant. Ensotek ships counter-flow towers with FRP casings in different capacities. Selection is based on water flow, inlet and outlet temperatures, wet-bulb temperature, process data and the installation area. Rental can be weekly, monthly or longer. Installation is done by the customer’s team or, on request, by Ensotek; technical advice, maintenance and service continue through the rental period. The same towers are used for heat-exchanger and chiller tests, factory acceptance tests, pilot plants and R&D setups.
Cooling Tower Service and Maintenance
Ensotek carries out periodic maintenance, repair, spare-parts supply and performance testing of water cooling towers. The service covers package and field-erected towers, including counter-flow axial-fan FRP towers, counter-flow sheet-metal towers, radial-fan towers, cross-flow NC and AQ towers and natural-draft field-erected towers. Modernizing existing towers to newer technology is included. Spare parts such as fan assemblies, fill, drift eliminators, nozzles, louvers and water-distribution parts are supplied.
Cooling Water Chemical Treatment
Ensotek supplies chemical treatment, dosing and filtration for cooling-tower, boiler and chiller water in order to control scale, corrosion and biological growth. The chemical groups are antiscalants, corrosion inhibitors, biocides, pH adjusters, cooling-tower chemicals and boiler-water chemicals. Ethylene glycol and propylene glycol antifreeze are supplied for closed circuits. Dosing covers automatic dosing, pH control, conductivity-controlled dosing, chlorine dosing and antiscalant dosing. Filtration uses automatic filters, cartridge filters, bag filters and backwashable sand filters.