Product description
More from this company
Ensotek CTP Su Soğutma Kuleleri Mühendislik San. Tic. Ltd. Şti.
Open-Circuit FRP Cooling Tower
Process Equipment ProductThese units are called open-circuit cooling towers because the water taken into the tower is cooled by direct contact with ambient air. Ensotek manufactures FRP package water cooling towers from 1 m³/h up to capacities of thousands of cubic metres per hour. Package towers are modular: models that fit a truck or container are shipped assembled from the factory; larger units are shipped knocked down and erected on site with a supervisor. Single-cell and multi-cell versions are available. On multi-cell towers the number of fans and water inlets equals the number of cells, and the electrical and water lines are separate so capacity can be staged. The casing is glass-fibre reinforced polyester, with a UV-resistant gel-coat outside and paraffin polyester inside. The structure uses pultruded FRP profiles. The fan is axial, with a gearbox on larger diameters. Fill is selected as PP trickle, PVC film or splash grid. Fasteners are AISI 304 stainless steel. The towers are counter-flow, induced-draft type.
İstanbul
Ensotek CTP Su Soğutma Kuleleri Mühendislik San. Tic. Ltd. Şti.
Closed-Circuit Cooling Tower
Process Equipment ProductClosed-circuit cooling towers are used where the process needs clean water that must stay free of contamination. The water that must remain clean is cooled as it passes through the coils inside the tower. Hot water flows inside the metal tubes while air drawn by the fan and the tower spray water cool the fluid through the tube wall. There is no evaporation loss from the clean circuit; the spray water circulating in the tower does evaporate and must be made up. Ensotek manufactures closed-circuit water cooling towers with galvanized steel tube or, when required, stainless tube cooling coils. They supply cold water to processes such as air compressors, induction furnaces and chiller groups. Coil fabrication is done at the Ankara factory in hot-dip galvanized or stainless steel. The range includes CC CTP and CC DCTP models.
İstanbul
Related products
Addpark İleri Mühendislik Teknolojileri A.Ş.
Heat Sinks and Heat Exchangers
General Heat ExchangersAddpark develops advanced heat sinks and heat exchangers with additive manufacturing. These components are used in electronics, automotive and aerospace to transfer heat from one location to another, regulate system temperature and prevent overheating. Where such parts are traditionally made by machining or casting, additive manufacturing allows complex geometries and internal features that those methods cannot produce. Addpark states that it carries out heat-exchanger research and development with institutes, universities and institutions.
Ankara
Haker Makine Endüstriyel Mühendislik Ltd. Şti.
Chocolate and Caramel Heat Exchangers
General Heat ExchangersSingle-tube and double-tube chocolate and caramel heat exchangers are built. The jacketed stator carries food-grade Teflon scrapers, the rotor body is Teflon coated and the stator is insulated with rock wool. Product temperature is measured by thermocouples and drive power is transmitted by a chain and sprocket system. Chocolate units cover 100-750 kg and caramel units 100-600 kg; frame and covers can be AISI 304 or ST37.
İstanbul
Adess Group
Heat Transfer Equipment
General Heat ExchangersShell and tube heat exchangers, water bath heaters and air-cooled heat exchangers (ACHE) for oil and gas, petrochemical, power and industrial applications. Equipment is designed according to process conditions such as pressure, temperature, flow rate and required thermal performance. Fabrication includes TEMA R, C and B class designs, ASME Section VIII Div. 1 plus U Stamp, PED 2014/68/EU and CE, shell-and-tube, U-tube and fixed tubesheet types, tube-to-tubesheet expansion and welding, HTRI thermal and hydraulic design software, and pickling and passivation with citric, nitric and phosphoric acid. Shell-and-tube units are offered as fixed tubesheet, floating tubesheet and U-tube; water bath heaters heat natural gas and other process fluids indirectly; ACHE units can be designed to ASME and API 661 with finned or bare tube bundles, plug or cover-plate headers and fan and drive systems. Materials include carbon steel, stainless steel, nickel alloys, copper alloys and duplex and super duplex.
Tekirdağ · Ergene-1 Organized Industrial Zone
Tanpera A.Ş.
Spiral Heat Exchangers
General Heat ExchangersTanpera Spiral Heat Exchangers provide reliable heat transfer for fluids with high solids content such as sludge, wastewater, pulp, high-viscosity hydrocarbons, and fiber-laden liquids. Channel height can be designed in the 6–50 mm range, suitable for continuous operation with dirty fluids. Single-piece or openable body options offer ease of maintenance and cleaning. Channels and body are typically AISI 304/316 stainless steel; duplex or special alloys are used for aggressive chemicals. Typical sectors are pulp and paper, wastewater heating, chemical processes, food production, and marine. Manufactured at the Gebze Free Zone facility.
İstanbul