Service description
More services from this company
Can Sızdırmazlık Elemanları San. ve Tic. Ltd. Şti.
Custom Sealing Design
Custom Seal EngineeringCan Sızdırmazlık produces solutions for sealing-element needs with 26 years of industry experience and designs based on advanced technology. Best O-ring performance requires correct sizing, the right material and the correct quality of the metal surfaces. Dynamic applications need a better surface than static duty: Rmax ≤ 4 μm on a dynamic cylinder, ≤ 2 μm on the rod, and ≤ 6–1.2 μm on the groove base; on a static sealing face Rmax ≤ 10 μm and on the groove base ≤ 25 μm. For static pressure, tolerances must be chosen so that an extrusion gap does not open.
İstanbul · Ikitelli Organized Industrial Zone
Can Sızdırmazlık Elemanları San. ve Tic. Ltd. Şti.
O-Ring Production for Special Conditions
General SealsProduction can be matched to special places of use and conditions. Standard production is stated as suitable for NBR from -40 °C to +100 °C, FKM from -25 °C to +220 °C, silicone rubber (MVQ) from -60 °C to +200 °C, EPDM from -50 °C to +125 °C, polyurethane (PU) from -40 °C to +80 °C and HNBR from -40 °C to +150 °C. Preferred hardness is 70 Sh and 90 Sh for NBR and PU, 75 Sh for FKM, and 70 Sh for MVQ, EPDM and HNBR. PTFE-coated O-rings can be produced from 20.00 mm to 200.00 mm, and Teflon O-rings from 8.00 mm to 400.00 mm.
İstanbul · Ikitelli Organized Industrial Zone
Related services
Artı Kauçuk
Custom Rubber Sealing
General SealsCustom rubber sealing elements are prepared in the same plant, from rubber compound and the mold through injection and inspection. Custom sizes can be produced alongside standard O-ring sizes when the customer requests them. NBR, EPDM, Viton, silicone, SBR, neoprene, HNBR and FFKM are listed as material groups. Products are offered for automotive, white goods, defense, aerospace, hydraulic and pneumatic applications. Exports go to 30 countries on 3 continents.
Bursa
Oringciler
Special Product Supply
General SealsFor specific special-part requests the firm provides product-supply support alongside mould making. Sealing products such as O-rings, rubber gaskets, diaphragms, oil seals and check-valve assemblies are supplied in natural and synthetic rubbers for domestic and international requirements. Supply is offered together with the firm's rubber injection and cryogenic deflashing capacity. NBR, EPDM, VMQ, NR, SBR, CR, CSM and FKM compounds are among the types used for these requests.
Bursa
Can Sızdırmazlık Elemanları San. ve Tic. Ltd. Şti.
O-Ring Production for Special Conditions
General SealsProduction can be matched to special places of use and conditions. Standard production is stated as suitable for NBR from -40 °C to +100 °C, FKM from -25 °C to +220 °C, silicone rubber (MVQ) from -60 °C to +200 °C, EPDM from -50 °C to +125 °C, polyurethane (PU) from -40 °C to +80 °C and HNBR from -40 °C to +150 °C. Preferred hardness is 70 Sh and 90 Sh for NBR and PU, 75 Sh for FKM, and 70 Sh for MVQ, EPDM and HNBR. PTFE-coated O-rings can be produced from 20.00 mm to 200.00 mm, and Teflon O-rings from 8.00 mm to 400.00 mm.
İstanbul · Ikitelli Organized Industrial Zone
Gökhan Kauçuk
Sealing Elements from Stock
General SealsSupply of standard products is described in the about text alongside custom production. After the request and the application conditions are reviewed, the company offers a part from stock or manufactures it to a special size and material. O-rings to DIN 3771, AS568, ISO 3601 and BS are supplied from stock or as custom production. Bonded seals to DIN 7603 and BS 4518 are stocked in inch and metric sizes. Hydraulic rod and piston profiles, wipers and static sealing elements are also listed among the product groups. After-sales technical support is stated as the third step of the same process.
Ankara · Ivedik Organized Industrial Zone