Industrial category
Vacuum Pumps
Turkish manufacturers and suppliers in Vacuum Pumps.
Popular products
Hillteknosis
Oil-Less Piston Vacuum Pump
Vacuum Pumps ProductOil-less piston-type vacuum pump production: R&D and work to prepare the piston vacuum pump for serial production continue. It will be offered to users as soon as possible. Capacity and features: 56 dB noise level, 8 kg weight, 700 torr 105 L/min, 220 volt. Developed at the Çukurova University Teknokent facility in Sarıçam / Adana.
Adana
Hillteknosis
Screw Vacuum Pump
Vacuum Pumps ProductThe screw-type vacuum pump is rapidly completing its production and design stages. These models, described on the site as the larger members of the family, are waiting to be shown. Production is planned to start at 100–150–200 m3/h capacities. It is not yet listed as a serial product; it is published on the site as an ongoing project.
Adana
Hillteknosis
Scroll Vacuum Pump HT00002
Vacuum Pumps ProductStock code HT00002. Oil-free dry-type (scroll) vacuum pump with 8–10 m3/h capacity and 10−2 mbar. It is produced domestically in Turkey. R&D and production of the local oil-free dry scroll vacuum pump were carried out with state support. Capacity is 10 m3/h at 10−2 mbar. The project aim was to complete R&D and make it ready for serial production. It has been completed successfully and is ready for use.
Adana
Anadolu Vacuum
CF (ConFlat) Vacuum Components
Vacuum Pumps ProductAnadolu Vacuum CF components are manufactured according to ISO 3669. The CF flange (originally called ConFlat) is a sexless design where both flanges are identical. Typical flange materials are stainless steel types 304, 316L, 316LN ESR. All components are 100% leak-tested and have leak rates better than 10−10 mbar·l/s. Standard sizes are NW 16 to 250. Other sizes can be produced on request. The ultra-high vacuum range (UHV) assigns the pressure range <10−8 mbar. To reach and keep up this low pressure range, a very low outgassing rate is required in the vacuum system.
Adana
Top industrial zones
Products in This Category
Approved supplier product catalogs in this category.
Hillteknosis
Oil-Less Piston Vacuum Pump
Vacuum Pumps ProductOil-less piston-type vacuum pump production: R&D and work to prepare the piston vacuum pump for serial production continue. It will be offered to users as soon as possible. Capacity and features: 56 dB noise level, 8 kg weight, 700 torr 105 L/min, 220 volt. Developed at the Çukurova University Teknokent facility in Sarıçam / Adana.
Adana
Hillteknosis
Screw Vacuum Pump
Vacuum Pumps ProductThe screw-type vacuum pump is rapidly completing its production and design stages. These models, described on the site as the larger members of the family, are waiting to be shown. Production is planned to start at 100–150–200 m3/h capacities. It is not yet listed as a serial product; it is published on the site as an ongoing project.
Adana
Hillteknosis
Scroll Vacuum Pump HT00002
Vacuum Pumps ProductStock code HT00002. Oil-free dry-type (scroll) vacuum pump with 8–10 m3/h capacity and 10−2 mbar. It is produced domestically in Turkey. R&D and production of the local oil-free dry scroll vacuum pump were carried out with state support. Capacity is 10 m3/h at 10−2 mbar. The project aim was to complete R&D and make it ready for serial production. It has been completed successfully and is ready for use.
Adana
Anadolu Vacuum
CF (ConFlat) Vacuum Components
Vacuum Pumps ProductAnadolu Vacuum CF components are manufactured according to ISO 3669. The CF flange (originally called ConFlat) is a sexless design where both flanges are identical. Typical flange materials are stainless steel types 304, 316L, 316LN ESR. All components are 100% leak-tested and have leak rates better than 10−10 mbar·l/s. Standard sizes are NW 16 to 250. Other sizes can be produced on request. The ultra-high vacuum range (UHV) assigns the pressure range <10−8 mbar. To reach and keep up this low pressure range, a very low outgassing rate is required in the vacuum system.
Adana
Anadolu Vacuum
Custom Vacuum Chambers
Vacuum Pumps ProductVacuum systems contain multiple components. It is possible to connect vacuum components with detachable pipes or flexible hoses to the flanges on the vacuum chambers. We can design our vacuum chambers in the dimensions you want, include the vacuum components needed in the system, and make special designs for you with our experienced R&D team. Anadolu Vacuum manufactures products meticulously, based on quality production. It meets the high standards of vacuum technology and high degree of sealing with quality and clean production. Leak tightness tests are carried out in all our vacuum chambers. The site also refers to a UHV custom chamber with precision machining, leak-tight sealing surfaces and export-ready documentation.
Adana
Anadolu Vacuum
ISO-KF Vacuum Components
Vacuum Pumps ProductISO-KF standard vacuum components are for fast, reliable vacuum connections. ISO-KF solutions of flanges, fittings, clamps and centering rings offer fast assembly, dependable sealing and broad compatibility across modern vacuum systems. KF components are used in low, medium and high vacuum systems. KF flanges are a sexless design made from stainless steel or aluminium. The seal is an elastomeric O-ring placed in a centering ring that aligns the flanges and holds the O-ring. They are manufactured at Anadolu Vacuum in accordance with DIN 28403 and ISO 2861 in sizes NW10 to NW50; welded parts are helium leak-tested and leak-proof up to 10−9 mbar·l/s.
Adana
Novac Makine
Kardelen 850 Horizontal Manual Vacuum Packaging Machine
Vacuum Pumps ProductKardelen 850 horizontal manual vacuum packaging machine. Usage: with 99.8% vacuum the machine extends the life of foods that spoil in a short time. It is a packaging machine required for every firm in the manufacture, trade and export of meat, dairy and seafood. It works in compartments and saves labour and time. Besides all kinds of meat, dairy and seafood it prevents short-term spoilage of all foods such as nuts, olive, puff pastry and yufka. A gas unit can be added optionally. Dimensions 2030x950x1020 mm, chamber 850x750x200 mm, capacity 20–30 VACUUM/Sc., weight 600 kg, warranty 2 years.
Sakarya
Novac Makine
NOVAC Vacuum Pumps
Vacuum Pumps ProductVacuum pumps: manufacture and sale of vacuum pumps with Novac Machine quality is published on the site. The technical drawing gives overall length 730 mm and base support spacing 440 mm for the 110 m3 model; 750 mm and 455 mm for the 160 m3 model. The rotary-vane section shows suction, compression and oil-separator exhaust. Vacuum pumps are produced together with vacuum packaging machines since 2005. Hasanbey Mah. Hasanbey Cd. No: 6/2 Erenler / Sakarya.
Sakarya
Novac Makine
Kardelen 700 Vertical Vacuum Packaging Machine
Vacuum Pumps ProductKardelen 700 vertical vacuum packaging machine. Usage: a vertically operated double-chamber machine that can vacuum-pack natural and processed roasted hazelnut, pistachio and roasted peanut etc. products up to 25 kg and can give food gas as a preservative so that processed sliced hazelnut is not crushed; for all nut and hazelnut industrialists and exporters. Machine dimensions 1700x1600x1475 mm, chamber 820x850x250 mm, capacity 20–30 VACUUM/Sc., weight 600, warranty 2 years.
Sakarya
Aduvac Vakum Mühendislik
GEV Booster and Sat. Screw Vacuum Pumps
Vacuum Pumps ProductBooster vacuum pumps are used as a secondary vacuum pump. Use on their own is not correct. They come into service when the first main pump has reached a certain pressure, to advance faster to high vacuum values. Dry screw vacuum pumps reach high vacuum levels on the order of 10−2 mbar. There are four 100% Italian-made models: Sat.150, Sat.350, Sat.450 and Sat.800. GP-GP/M+Booster packages are published at 5×10−2 mbar / 1×10−2 mbar absolute.
İstanbul
Aduvac Vakum Mühendislik
GEV GP-GP/M Oil Rotary Vane Vacuum Pumps
Vacuum Pumps ProductADUVAC Vacuum Engineering is the contracted authorized Turkey distributor of the Italian GEV brand. Single-stage oil vacuum pumps are offered with GEV. In today’s technologies 0.1 mbar absolute vacuum is obtained with single-stage oil pumps, while two-stage oil pumps can reach 0.001 mbar. The GP-GP/M series runs from 11–13 m3/h (0.55 kW) to 300–360 m3/h (7.5 kW); e.g. GP-GP/M 11 final vacuum 10 mbar–1 mbar / 0.55 kW IE2-3; GP-GP/M 160 160–192 m3/h, 5 mbar–0.1 mbar / 4 kW; GP-GP/M 308 300–360 m3/h, 10 mbar–0.5 mbar / 7.5 kW.
İstanbul
Aduvac Vakum Mühendislik
GEV GS and GPR Dry Vacuum Pumps
Vacuum Pumps ProductDry vacuum pumps are ideal for low-pressure applications. GS-series dry carbon-vane pumps GS3, GS6, GS10, GS16, GS25, GS40 and GS100 can run continuously at 150 mbar absolute. Maximum final vacuum of the GS dry series is 100 mbar; the ideal continuous working pressure is 150 mbar. GPR-series dry claw pumps GPR150 and GPR300 can obtain 70 mbar continuously in absolute vacuum. Ex-proof pumps suitable for Zone 1-2 and Zone 20-21-22 are also published on the ATEX oil lines.
İstanbul
Services in This Category
Approved supplier service catalogs in this category.
Hillteknosis
Vacuum Pump Spare Part Manufacture
Vacuum Pumps ServiceVacuum pump spare-part manufacture: we carry out aftermarket spare-part production for vacuum pumps of all brands and models. In our country there is an original spare-part problem on foreign-brand vacuum pumps. As also stated on the oil-type vacuum pump maintenance page, foreign products have a spare-part problem; the pumps in use go to waste every few years. We identify the faulty parts of your vacuum pumps and produce a new one in a better way than the original.
Adana
Hillteknosis
Oil Vacuum Pump Maintenance and Repair
Vacuum Pumps ServiceWe carry out maintenance and repair of oil-type vacuum pumps of all brands and models. There is also a spare-part problem on foreign products. For that reason the vacuum pumps in use go to waste every few years. We also eliminate this problem. We identify the faulty parts of your vacuum pumps and produce a new one in a better way than the original. The site asks you to contact them for detailed information. Stock code: 0.
Adana
Hillteknosis
Vacuum Pump Maintenance and Repair
Vacuum Pumps ServiceVacuum pump maintenance and repair: we provide maintenance and repair of vacuum pumps of all brands and models. Do not decide without asking us. FAQ: we maintain and repair vacuum pumps of all brands and models. We carry out their tests and deliver them in working order. Çukurova University Teknokent Block A, Balcalı Mah. Güney Kampüs 5. Sokak, Sarıçam / Adana.
Adana
Anadolu Vacuum
CNC Machining
Vacuum Pumps ServiceAt the Anadolu Vacuum Factory, advanced machinery meets disciplined manufacturing. The machine park is built to deliver precision, consistency and dependable quality for both standard vacuum components and custom-engineered solutions. CNC turning capacity is built around high-precision equipment and automated support systems: Nakamura-Tome SC-100X2, DMG CTX 310, Spinner TC800, 2 × Spinner TC400, 2 × Spinner TC600, SMCY (C/Y Axis). Machining for the vacuum and semiconductor industry has been carried out for more than 10 years.
Adana
Anadolu Vacuum
Custom Vacuum Component Design and Manufacture
Vacuum Pumps ServiceWith a team of 30 experts (engineers, technicians, designers, operators and administrative staff), engineering, design and manufacturing services are provided for ISO-KF, ISO-K, ISO-F and CF (ConFlat) systems in the vacuum and semiconductor industry, and special products are designed according to needs. From standard fittings to custom-engineered parts, solutions tailored to the system needs are delivered. Contact is requested for special-production vacuum components, vacuum chambers and vacuum brazings. Lean manufacturing system and corporate structure are stated on the site About Us.
Adana
Anadolu Vacuum
Helium Leak Test
Vacuum Pumps ServiceThe helium leak test, where we manufacture vacuum components, is part of our manufacturing process. We use helium leak testing to find small leaks or larger leaks in larger volumes. Helium is used as a tracer gas and its concentration is measured. Helium test can be used to determine leakage rates from 1×10−6 mbar·lt/s to 1×10−12 mbar·lt/s. In the vacuum method the inside of the part is vacuumed and helium is sprayed from outside onto welds, flanges, portals and connection points; helium entering through leaks is recorded on the mass spectrometer. In the sniffer method the inside is pressurized with helium and possible leak points are scanned with a sniffer. For the helium leak test service, Multipurpose ASM 340 belonging to Pfeiffer Vacuum is used.
Adana
Novac Makine
Vacuum Packaging Machine Manufacture
Vacuum Pumps ServiceAs a solution partner in vacuum packaging machines, the company has specialized since 2005 in vacuum packaging machines, slicing machines and ready-tray thermoform packaging machines. The Kardelen series vertical and horizontal models (700 vertical double chamber, 850 horizontal manual, 550, 800, 1200 etc.) are listed on the site. Produced in Turkey, marketed to the world. On-time delivery: ordered products are delivered within the stated period.
Sakarya
Novac Makine
Slicing and Thermoform Machine Manufacture
Vacuum Pumps ServiceSlicing machines are among the product groups Novac Machine has specialized in since 2005. The site lists Eko-Dil 250, Eko-Dil 508 digital, Eko-Dil 70, Eko-Dil cezerye slicing and aged-kashar slicing machines. Cube cutting, Nova grater kashar chopping, shrink dip tanks and ready-tray thermoform lines are also published. Products are manufactured in accordance with Turkish standards (TSE & ISO).
Sakarya
Novac Makine
Vacuum Pump Manufacture and Sale
Vacuum Pumps ServiceVacuum pump manufacture and sale is carried out by Novac Makine Sanayi together with vacuum packaging machines since 2005. Vacuum pumps are presented on the site with Novac Machine quality; external dimensions of the 110 m3 and 160 m3 models are published on the technical drawing. TSE & ISO: products are manufactured in accordance with Turkish standards. Hasanbey Mah. Hasanbey Cd. No: 6/2 Erenler / Sakarya.
Sakarya
Aduvac Vakum Mühendislik
Spare Parts, Service and On-site Application
Vacuum Pumps ServiceADUVAC Engineering presents globally known supplier sources to its customers with its engineer-origin specialist staff and, with its specialist technical service team, carries application and operating experience that starts before the sale through to after-sales, providing spare parts, service, maintenance and on-site application. Operations are run from Soğanlık Gümüşpınar Mah. Yeniçağ Cad. No:9A, Kartal / Istanbul.
İstanbul
Aduvac Vakum Mühendislik
MASTERVAC Italy Vacuum Units Distributorship
Vacuum Pumps ServiceMASTERVAC-ITALY vacuum units: we operate as Turkey distributor of the MASTERVAC brand. All equipment belonging to the machines in our sales is original Italian MASTERVAC. The vacuum motor is Siemens or Mastervac. Import is done as a complete set including the vacuum motor. We have no sales other than original. ATEX Zone 0-1-2 (gas) Zone 20-21-22 (dust) mobile dust extraction, AISI 316-304 stainless mobile vacuum units, FDA-GMP certified and antistatic units are published.
İstanbul
Aduvac Vakum Mühendislik
Vacuum Pump and System Selection
Vacuum Pumps ServiceADUVAC vacuum pumps and systems: we run turnkey professional solutions in vacuum pumps, systems and technique. Solutions are offered in high energy-efficiency new-generation vacuum pumps, dry claw, single- and two-stage oil, booster, ATEX, central vacuum systems, medical vacuum stations, line filters and Industry 4.0 vacuum control. Objective lasting investments are proposed with the brands we represent. The most efficient pump or system type is selected together with the information you provide.
İstanbul
Suppliers in This Category
10 suppliers
For buyers
Get quotes from Vacuum Pumps suppliers
Browse verified companies below or describe your need to collect multiple quotes in Vacuum Pumps quickly.
-
Verified profiles and certifications
-
Multiple quotes from one RFQ
-
Filter by capability and location
Browse Related Categories
Discover suppliers in adjacent industrial sectors.
Pumps
Turkish manufacturers and suppliers in Pumps.
Ball Valves
Turkish manufacturers and suppliers in Ball Valves.
Check Valves
Turkish manufacturers and suppliers in Check Valves.
Tubing
Turkish manufacturers and suppliers in Tubing.
Fittings
Turkish manufacturers and suppliers in Fittings.
Fluid Handling Equipment
Turkish manufacturers and suppliers in Fluid Handling Equipment.
Featured Supplier Profiles
Capability, certification, and export profiles with enough suppliers in this category.
Stainless Steel — Vacuum Pumps manufacturers
10 approved suppliers
IndustryMachinery Manufacturing — Vacuum Pumps suppliers
10 approved suppliers
ProcessSerial Production — Vacuum Pumps manufacturers
10 approved suppliers
Technical standardEN — Vacuum Pumps manufacturers
10 approved suppliers
CapabilityRotary Vane Vacuum Pumps — Vacuum Pumps manufacturers
9 approved suppliers
CapabilityVacuum Systems — Vacuum Pumps manufacturers
9 approved suppliers
CapabilityVacuum Maintenance — Vacuum Pumps manufacturers
9 approved suppliers
Technical standardDIN — Vacuum Pumps manufacturers
9 approved suppliers
MaterialCast Iron — Vacuum Pumps manufacturers
8 approved suppliers
IndustryFood — Vacuum Pumps suppliers
8 approved suppliers
IndustryEnergy — Vacuum Pumps suppliers
8 approved suppliers
CertificationISO 9001 certified Vacuum Pumps suppliers
7 approved suppliers
Featured Product Catalogs
Standard product types with enough suppliers in this category.
Featured Service Catalogs
Standard service types in this category that meet the supplier threshold.
Find the right supplier or list your company
Send RFQs as a buyer or publish your company profile in this category.