Industrial category
Pressure Vessels
Turkish manufacturers and suppliers in Pressure Vessels.
Popular products
Adess Group
Pressure Vessels & Columns
Pressure Vessels ProductCustom-built pressure vessels, columns and towers — from large-scale process towers to reactors, separators and storage vessels, designed to international standards. ADESS GROUP provides solutions for key process equipment, ranging from large-scale towers and columns to various types of pressure vessels. Fabrication follows ASME Section VIII Division 1, API standards (API 650, API 660, etc.), PED 2014/68/EU and CE requirements, in atmospheric, low-pressure and high-pressure designs. Project requirements can include radiographic testing up to 100%, PMI, pickling and passivation, heat treatment and stress relieving, internal pipe coils, pressure-vessel mechanical design software and AutoCAD Mechanical. Materials include carbon steel, stainless steel, nickel alloys, copper alloys and duplex and super duplex.
Teki̇rdağ · Ergene-1 Organized Industrial Zone
Güven Soğutma Üniteleri San. ve Tic. A.Ş.
Vertical Liquid Receivers
Pressure Vessels ProductLiquid receivers are used to accommodate fluctuations in the system and in ambient temperatures. On the high-pressure side they act as a cushion between liquid and hot gas, prevent hot gas from reaching the evaporator and allow liquid in the circuit to settle. They are also used to collect and store refrigerant when service is required. Receivers are manufactured from 0.5 L to 1000 L in accordance with CE 2014/68/EU [PED]. They are installed on the high-pressure side of the refrigeration circuit, at the condenser outlet. In the GVN VLR vertical range, an example rating is 33 bar maximum working pressure, 1 litre volume, Ø89 mm shell, ODS 1/4 in connection, HCFC, HFC, R290 and R717 refrigerants, and -20°C to +130°C operating temperature.
İstanbul
Güven Soğutma Üniteleri San. ve Tic. A.Ş.
Helical Oil Separators
Pressure Vessels ProductHelical oil separators separate oil from discharge gas and return it effectively to the compressor, keeping crankcase oil level and reducing excess oil circulation to raise system efficiency. They are designed for low-pressure oil management and can be used in many systems and with multiple compressors. The internal spiral and stainless filter are more efficient than conventional separators. The gas/oil mix is moved by centrifugal force along the helix so oil particles hit the wall and collect in the bottom chamber. They are designed for scroll and reciprocating compressors; use with screw and rotary compressors is not recommended. A GVN OS.H example is rated 45 bar maximum working pressure, 2.5 L volume, Ø102 mm, ODS 5/8 in, HCFC, HFC, R290, R717 and R-410A, PED CAT.I/CAT.II, -20°C to +130°C.
İstanbul
Güven Soğutma Üniteleri San. ve Tic. A.Ş.
Suction Line Accumulators
Pressure Vessels ProductSuction line accumulators are installed between the evaporator and the compressor. They hold liquid refrigerant so the compressor does not ingest liquid and only vapour is sent on. A U-tube and tube-in-tube design is used for maximum refrigerant flow and minimum oil hold-up: vapour is drawn from the top while oil and liquid collected in the vessel return through a hole in the return tube with the gas. Heat-exchanger accumulators are used when evaporation temperature is very low. They are recommended for parallel compressors, transport refrigeration, two-stage systems, hot-gas defrost, container cooling, long lines, reverse cycle, heat pumps and flooded evaporators. Hold-up capacity should not be below 50% of system charge; 50–70% is advised. A GVN SLA example is 33 bar maximum working pressure, 1.7 L, Ø114 mm, ODS 1/2 in, HCFC, HFC, R290 and R717, PED CAT.I/CAT.II, -20°C to +130°C.
İstanbul
Top industrial zones
Products in This Category
Approved supplier product catalogs in this category.
Adess Group
Pressure Vessels & Columns
Pressure Vessels ProductCustom-built pressure vessels, columns and towers — from large-scale process towers to reactors, separators and storage vessels, designed to international standards. ADESS GROUP provides solutions for key process equipment, ranging from large-scale towers and columns to various types of pressure vessels. Fabrication follows ASME Section VIII Division 1, API standards (API 650, API 660, etc.), PED 2014/68/EU and CE requirements, in atmospheric, low-pressure and high-pressure designs. Project requirements can include radiographic testing up to 100%, PMI, pickling and passivation, heat treatment and stress relieving, internal pipe coils, pressure-vessel mechanical design software and AutoCAD Mechanical. Materials include carbon steel, stainless steel, nickel alloys, copper alloys and duplex and super duplex.
Teki̇rdağ · Ergene-1 Organized Industrial Zone
Güven Soğutma Üniteleri San. ve Tic. A.Ş.
Vertical Liquid Receivers
Pressure Vessels ProductLiquid receivers are used to accommodate fluctuations in the system and in ambient temperatures. On the high-pressure side they act as a cushion between liquid and hot gas, prevent hot gas from reaching the evaporator and allow liquid in the circuit to settle. They are also used to collect and store refrigerant when service is required. Receivers are manufactured from 0.5 L to 1000 L in accordance with CE 2014/68/EU [PED]. They are installed on the high-pressure side of the refrigeration circuit, at the condenser outlet. In the GVN VLR vertical range, an example rating is 33 bar maximum working pressure, 1 litre volume, Ø89 mm shell, ODS 1/4 in connection, HCFC, HFC, R290 and R717 refrigerants, and -20°C to +130°C operating temperature.
İstanbul
Güven Soğutma Üniteleri San. ve Tic. A.Ş.
Helical Oil Separators
Pressure Vessels ProductHelical oil separators separate oil from discharge gas and return it effectively to the compressor, keeping crankcase oil level and reducing excess oil circulation to raise system efficiency. They are designed for low-pressure oil management and can be used in many systems and with multiple compressors. The internal spiral and stainless filter are more efficient than conventional separators. The gas/oil mix is moved by centrifugal force along the helix so oil particles hit the wall and collect in the bottom chamber. They are designed for scroll and reciprocating compressors; use with screw and rotary compressors is not recommended. A GVN OS.H example is rated 45 bar maximum working pressure, 2.5 L volume, Ø102 mm, ODS 5/8 in, HCFC, HFC, R290, R717 and R-410A, PED CAT.I/CAT.II, -20°C to +130°C.
İstanbul
Güven Soğutma Üniteleri San. ve Tic. A.Ş.
Suction Line Accumulators
Pressure Vessels ProductSuction line accumulators are installed between the evaporator and the compressor. They hold liquid refrigerant so the compressor does not ingest liquid and only vapour is sent on. A U-tube and tube-in-tube design is used for maximum refrigerant flow and minimum oil hold-up: vapour is drawn from the top while oil and liquid collected in the vessel return through a hole in the return tube with the gas. Heat-exchanger accumulators are used when evaporation temperature is very low. They are recommended for parallel compressors, transport refrigeration, two-stage systems, hot-gas defrost, container cooling, long lines, reverse cycle, heat pumps and flooded evaporators. Hold-up capacity should not be below 50% of system charge; 50–70% is advised. A GVN SLA example is 33 bar maximum working pressure, 1.7 L, Ø114 mm, ODS 1/2 in, HCFC, HFC, R290 and R717, PED CAT.I/CAT.II, -20°C to +130°C.
İstanbul
TBT Tankbau Teknik Basınçlı Kaplar San. Tic. Ltd. Şti.
Screed vessel
Pressure Vessels ProductOur industrial and construction screed vessels are engineered from specialized steel alloys to deliver exceptional thermal and mechanical durability in strict compliance with international standards. Every unit undergoes rigorous hydrostatic testing and is fully certified by European Notified Bodies. All our products are manufactured to guarantee maximum operational safety and a prolonged service life.
İstanbul · Ikitelli Organized Industrial Zone
Gemsan Genel Endüstri Mühendislik Hizmetleri Sanayi Ticaret A.Ş.
Pressure Vessels and Process Vessels
Pressure Vessels ProductProduces cryogenic ammonia tanks, sulfuric acid storage tanks, reactors, blenders and related process vessels. Under its ISO 3834-2 welding quality scope it manufactures welded storage tanks, pressure vessels and pressure-vessel equipment. Completed references include ETİ Bakır Samsun cryogenic ammonia and sulfuric acid tanks and Rohm & Haas reactor/tank manufacturing.
Kocaeli̇
Simgetek İmalat ve Mühendislik A.Ş.
Storage Tanks
Pressure Vessels ProductFixed and floating-roof tanks are manufactured and assembled. Storage tanks including spherical tank assembly are produced in accordance with TEMA, ASME, API and AD 2000 standards. Simgetek provides equipment design and manufacture for chemical, refining, petrochemical, fertiliser, gas and steel sectors in compliance with TEMA, ASME, API and AD 2000 standards.
Adana · Adana Haci Sabanci Organized Industrial Zone
Simgetek İmalat ve Mühendislik A.Ş.
Pressure Tanks
Pressure Vessels ProductSA-516 Gr.70 quality pressure tanks are designed in accordance with ASME Sec.VIII Div.1 and manufactured with ASME U-Stamp and CE marking. Tanks can be manufactured in a single piece and heat-treated after fabrication. Project-based production in various grades including SS 304 and SA-387 Gr.22.
Adana · Adana Haci Sabanci Organized Industrial Zone
Simgetek İmalat ve Mühendislik A.Ş.
Custom Process Equipment
Pressure Vessels ProductSimgetek provides equipment design and manufacture as well as complete plant construction for organisations in chemical, oil refining, petrochemical, fertiliser, gas and steel sectors. Equipment is manufactured and assembled in accordance with international codes and standards including TEMA, ASME, API and AD 2000-MERKBLATT.
Adana · Adana Haci Sabanci Organized Industrial Zone
Çukurova Bombe ve Makina Sanayi Tic. Ltd. Şti.
CE Certified Air Receivers
Pressure Vessels ProductBranded air receivers built to DIN, CE, TÜV, Bureau Veritas, RINA, DNV GL, GOST standards under Chamber of Mechanical Engineers supervision. Manufactured to required pressure ranges.
Adana · Adana Haci Sabanci Organized Industrial Zone
Çukurova Bombe ve Makina Sanayi Tic. Ltd. Şti.
Gas Fire Suppression Cylinders
Pressure Vessels ProductGas cylinders to EN 13322-1 and EN 14208, TPED PI MARKED; 5–423 litres at 25 and 42 bar. Used with HFC-125, HFC-227ea, FK-5-1-12 clean-agent fire suppression systems.
Adana · Adana Haci Sabanci Organized Industrial Zone
Çukurova Bombe ve Makina Sanayi Tic. Ltd. Şti.
Pressed Elliptical and Torispherical Dished Heads
Pressure Vessels ProductElliptical and torispherical pressed dished heads from 48 mm to 1150 mm diameter. Eases cylinder assembly; cord-welded pressed heads preferred for automated welding. Geometry suitable for fast automated welding.
Adana · Adana Haci Sabanci Organized Industrial Zone
Services in This Category
Approved supplier service catalogs in this category.
Güven Soğutma Üniteleri San. ve Tic. A.Ş.
Custom Pressure Vessel Manufacturing
Pressure Vessels ServiceBesides standard GVN catalogue items, project-specific refrigeration pressure vessels are manufactured to customer requirements. Güven Soğutma produces in a modern plant with 23,000 m² indoor area, advanced machinery, engineering infrastructure and more than 150 employees. Raw materials follow the Pressure Equipment Directive and EN 13445-2, using EN 10028 certified traceable steels. Body pipes are produced by Borusan Mannesmann in P355NH with EN 10204 3.1 certification; flat material is P355GH and couplings/flanges P265GH. Cylinders, heads and feet are made on deep-drawing presses under PED Annex I 4.3. All finished products receive 100% pneumatic leak testing; high-pressure groups also undergo burst tests to EN 14276-1.
İstanbul
TBT Tankbau Teknik Basınçlı Kaplar San. Tic. Ltd. Şti.
Pressure Vessel Manufacturing
Pressure Vessels ServiceCE and PED 2014/68/EU certified pressure vessel manufacturing in Istanbul Ikitelli OSB. Scope includes stainless steel (AISI 304, 316L) and carbon steel vessels, air receiver / compressor tanks, LPG, LNG and CNG tanks, and ammonia and chemical tanks. Production is referenced to ASME Section VIII Division 1 (U Stamp), EN 13445 and AD 2000 Merkblatt, with NDT (RT, UT, PT, MT) and hydrostatic testing.
İstanbul · Ikitelli Organized Industrial Zone
Simgetek İmalat ve Mühendislik A.Ş.
Steel Construction Fabrication and Assembly
Pressure Vessels ServiceAll types of steel construction manufacture and assembly are activity areas. Construction, equipment installation, process piping, electrical and instrumentation, and HVAC works for industrial facilities are performed.
Adana · Adana Haci Sabanci Organized Industrial Zone
Simgetek İmalat ve Mühendislik A.Ş.
Project Detailing
Pressure Vessels ServiceProject detailing services are among the activity areas. Complete design, engineering, manufacture and assembly of industrial facilities have been undertaken since 1988. Simgetek provides equipment design and manufacture for chemical, refining, petrochemical, fertiliser, gas and steel sectors in compliance with TEMA, ASME, API and AD 2000 standards.
Adana · Adana Haci Sabanci Organized Industrial Zone
Simgetek İmalat ve Mühendislik A.Ş.
Turnkey Plant Construction
Pressure Vessels ServiceSimgetek provides complete plant construction on a turnkey basis for chemical, refining, petrochemical, fertiliser, gas and steel sector clients when required. Projects requiring engineering knowledge and experience can be delivered on a turnkey basis.
Adana · Adana Haci Sabanci Organized Industrial Zone
Çukurova Bombe ve Makina Sanayi Tic. Ltd. Şti.
Project-Based Custom Manufacturing
Pressure Vessels ServiceCustomer-based requests are engineered and manufactured. Custom pressurized and non-pressurized vessel manufacturing at the 10,000 m² AOSB facility.
Adana · Adana Haci Sabanci Organized Industrial Zone
Çukurova Bombe ve Makina Sanayi Tic. Ltd. Şti.
Contract Plasma Cutting
Pressure Vessels ServiceContract plasma cutting service offered together with sheet processing capacity. Sheet cutting needs met for industrial plant and pressure vessel projects.
Adana · Adana Haci Sabanci Organized Industrial Zone
Çukurova Bombe ve Makina Sanayi Tic. Ltd. Şti.
Contract Press Forming
Pressure Vessels ServiceContract press forming services offered to customers. Press capacity used in head and vessel manufacturing also available for subcontract work.
Adana · Adana Haci Sabanci Organized Industrial Zone
Barış Endüstriyel Enerji Sistemleri A.Ş.
Heat Recovery Projects
Pressure Vessels ServiceServices include preparation of heat recovery projects for energy savings in facilities, manufacturing of required heat equipment on site, and turnkey contracting of these projects.
Adana · Adana Haci Sabanci Organized Industrial Zone
Barış Endüstriyel Enerji Sistemleri A.Ş.
Thermal Deaerator Systems
Pressure Vessels ServiceO2 removal down to 7 ppb (0.005 cc/l) and complete CO2 venting are targeted. Production up to 100 ton/h is available. Deaerator application extends boiler and steam line service life.
Adana · Adana Haci Sabanci Organized Industrial Zone
Barış Endüstriyel Enerji Sistemleri A.Ş.
Cogeneration Systems
Pressure Vessels ServiceCogeneration or Combined Heat and Power (CHP) is the simultaneous production of electricity and heat from the same fuel source. Cogeneration provides nearly 40% energy savings compared with conventional supply methods; total energy use efficiency can reach up to 90%.
Adana · Adana Haci Sabanci Organized Industrial Zone
GBS Basınçlı Kaplar
Tank Heat Treatment
Pressure Vessels ServiceHeat treatment is part of the pressure-vessel quality process. It is applied on the GBS line. Produced or applied at the İkitelli OSB plant; size and capacity follow the published range and the customer request.
İstanbul · Ikitelli Organized Industrial Zone
Suppliers in This Category
25 suppliers
For buyers
Get quotes from Pressure Vessels suppliers
Browse verified companies below or describe your need to collect multiple quotes in Pressure Vessels quickly.
-
Verified profiles and certifications
-
Multiple quotes from one RFQ
-
Filter by capability and location
Browse Related Categories
Discover suppliers in adjacent industrial sectors.
Heat Exchangers
Turkish manufacturers and suppliers in Heat Exchangers.
Mixers
Turkish manufacturers and suppliers in Mixers.
Ovens
Turkish manufacturers and suppliers in Ovens.
Furnaces
Turkish manufacturers and suppliers in Furnaces.
Heating Elements
Turkish manufacturers and suppliers in Heating Elements.
Tanks
Turkish manufacturers and suppliers in Tanks.
Drying Machines
Turkish manufacturers of industrial drying machines and drying systems.
Featured Supplier Profiles
Capability, certification, and export profiles with enough suppliers in this category.
ISO 9001 certified Pressure Vessels suppliers
22 approved suppliers
MaterialStainless Steel — Pressure Vessels manufacturers
21 approved suppliers
Technical standardEN — Pressure Vessels manufacturers
19 approved suppliers
CapabilityCustom Pressure Vessels — Pressure Vessels manufacturers
18 approved suppliers
MaterialCarbon Steel — Pressure Vessels manufacturers
18 approved suppliers
IndustryEnergy — Pressure Vessels suppliers
18 approved suppliers
ProcessSerial Production — Pressure Vessels manufacturers
18 approved suppliers
IndustryMachinery Manufacturing — Pressure Vessels suppliers
15 approved suppliers
CertificationCE Marking certified Pressure Vessels suppliers
14 approved suppliers
CapabilityStorage Vessels — Pressure Vessels manufacturers
13 approved suppliers
ExportPressure Vessels suppliers exporting to Germany
13 approved suppliers
IndustryConstruction — Pressure Vessels suppliers
12 approved suppliers
Featured Product Catalogs
Standard product types with enough suppliers in this category.
Featured Service Catalogs
Standard service types in this category that meet the supplier threshold.
Find the right supplier or list your company
Send RFQs as a buyer or publish your company profile in this category.