Air Filtration & Dust Collection Systems

Aquaflex

9" Fine Bubble Disc Diffuser

The 9" disc diffuser is an aeration element installed on the floor of biological treatment tanks in a grid pattern, releasing air as fine bubbles through thousands of micro-slits in the membrane. On a 230 mm effective diameter there are 6800 slits; membrane material can be EPDM or silicone. The one-way membrane prevents sludge backflow when the system stops. Effective area is 0.039 m² and weight 0.65 kg; used in domestic and industrial activated sludge, MBR and SBR aeration grids.

Bursa

Aquaflex

APD1100 Plate Diffuser

The APD1100 plate diffuser is a fine-bubble aeration element whose rectangular body allows denser floor coverage than disc diffusers. It offers 0.20 m² effective area on a 185×1070 mm membrane surface with a 2-25 m³/h capacity range. EPDM and silicone membranes are available. It is preferred for deep activated-sludge tanks, plants with diurnal load swings and biological aeration ahead of MBR, delivering higher air capacity per connection point.

Bursa

Aquaflex

ATD-63 Fine Bubble Tube Diffuser

The ATD-63 tube diffuser is a fine-bubble aeration element with a 63 mm cylindrical body that mounts directly on the air distribution pipe. It suits narrow and deep tanks without a separate floor grid. Membrane options are EPDM, silicone, PTFE and HTPU; capacity is 0-40 m³/h and effective area 0.05-0.2 m². Suitable for partial grid upgrades, chemically aggressive industrial wastewater and plants planned for staged capacity growth.

Bursa

Acrotech

Filtered Electrostatic Powder Booths

ACROTECH filtered electrostatic powder booths work by powder sticking to the filter under fan suction. German HV filters hold particles down to 10 microns. Automatic pulse valves knock powder back into the booth; it is sieved under the booth and returned to the gun. Paint recovery is stated up to 95%. Standard filter size Ø320×600 mm, 10 m² per filter, radial suction fans and automatic reverse-pressure pulsing are listed.

Kocaeli̇

Acrotech

Cartridge Dust Collection Systems

ACROTECH dust collection systems filter process dust and particles at high efficiency. Filtration capacity is stated up to 99.9%; they also recover coating material. Cartridge units and cyclones catch all particle sizes. Cartridge collectors are listed with 99.9% efficiency, self-cleaning filters and coating recovery. The FAQ recommends a cartridge filter booth (98–99% recovery) when running one or few colours.

Kocaeli̇

Acrotech

Cyclone Dust Separator Systems

The ACROTECH cyclone recovers more than 96% of inlet powder by centrifugal force. Dirty air enters the body and spirals down; particles are thrown to the wall. Clean air leaves up the centre tube. An automatic sieve under the cone recovers powder for reuse. Outlet direction is set by a damper. ATEX suitability for potentially explosive dust is stated. In cyclone booths, extracted powder particles are flung into the cyclone body by a 180-degree centrifugal spin.

Kocaeli̇

Havak

GRINDEX Grinding Dust Extractors

GRINDEX is made for dry grinding and tool sharpening, and for places where incandescent particles could damage filters. A water pre-separator extinguishes sparks before they reach the filter, cutting fire risk and pocket blinding. A manual mechanical shaker keeps efficiency. Extracted air can be returned to the room. Noise is about 70 dBA. High-permeability polyester pockets reach 95% efficiency, up to 99.99% in special duties. DF1 0.75 kW / 1450 m³/h; DF2 2.2 kW / 2280 m³/h.

İstanbul

Havak

Stationary Filter Units (IPERJET DF)

IPERJET DF is fitted with horizontal cartridges for welding fumes, fine and coarse dust, small particles and fumes from thermal cutting. It is for indoor use. Where local rules allow, filtered air can be returned to the room to save energy. A separator zone at the inlet drops most dust into the first tank; remaining dust is filtered into a second tank. The onboard high-performance fan runs at high suction and low noise. DF4 2200 m³/h, DF6 4000 m³/h, DF9 6500 m³/h; cartridges Ø325 × H750 mm, IFA/BGIA M PES polyester.

İstanbul

Havak

AIRALT Dust Collectors

Dirty air enters the hopper; with a sudden speed drop and a first-stage impact filter, large particles fall into the dust bin. Fine particles pass to the cartridges (AIRALT) or bags (AIRALT/M); air flows outside-in and dust collects on the outer surface. Jet-pulse cleaning blows compressed air inside-out. Standard cartridges/bags are IFA/BGIA L-PES polyester. At 0.056 m/s/m², 200 mg/m³ inlet loading and 0.2–2 μm particles, residual is

İstanbul

Ünveren

RP Modular U-TEX Cartridge Dust Collectors

UAS® RP modular U-TEX dust collectors are added together to reach the required capacity. Standard filters are U-TEX PTFE-coated cartridges. Units work by surface filtration and collect dust and emissions. Dirty cartridges are cleaned automatically by compressed-air nozzles with electronic sensing. Standard models: RP-2 2600 m³/h / 35 m² / 3 kW through RP-8 10400 m³/h / 140 m² / 15 kW. Dust bin 100 litres. Compressed air 6 bar – 80 l/min. Used on laser-plasma cutting tables, foundry, automotive, welding, metal polishing and blasting.

Adana · Adana Haci Sabanci Organized Industrial Zone

Ünveren

Wall-Mounted Auto-Clean U-TEX Filter Units

Wall-mounted auto-clean U-TEX units work by surface filtration. Cartridges are PTFE-coated so dust is separated before it enters the media. The system is intended for welding-fume extraction. Cartridges are cleaned automatically with compressed air through rotary blowers. Cleaned air is returned to the room at 99.9%. One-arm model: 2,200 m³/h fan, 1,200 m³/h capture, 1.5 kW. Two-arm: 3,000 m³/h fan, 2×1,000 m³/h, 3 kW. Arms from 2 to 10 m can be fitted. Production of wall-mounted stationary welding-smoke filters started in Turkey in 1992.

Adana · Adana Haci Sabanci Organized Industrial Zone

Ünveren

HCM-55 Filtered Grinding-Welding Tables

The U-TEX cartridge cleans dirty air at 98% and returns it to the work area. A flame-arresting pre-filter and a washable metal filter form a three-stage spark trap before the filter chamber. Operation is surface filtration. Cartridges are pulse-cleaned at 6 bar. The S235JR steel grate is hot-dip galvanized to DIN 24537 and DIN EN ISO 1461. Fan 5000 m³/h, motor 5.5 kW 3000 rpm, 67 dB(A), max load 1000 kg, size 900×1500×900 mm. Uses: welding, grinding, deburring, polishing, blasting, plasma cutting.

Adana · Adana Haci Sabanci Organized Industrial Zone

Acrotech

Turnkey Plant Installation

Wood painting plants are delivered turn-key with wet booths, curing ovens, positive-pressure rooms, sanding rooms and dust collection. Powder plants treat conveyors, curing ovens, booths and powder recovery as one turn-key package. Factory is in Çayırova/Kocaeli; office in Beykoz/Istanbul.

Kocaeli̇

Havak

Coral Dust Collection Supply

HAVAK became distributor of Coral, one of Europe’s industrial ventilation manufacturers. Sold industrial lines include central dust collectors, central high-vacuum units, oil-mist extractors, mobile fume/dust extractors, VOC and gas filtration, IPERJET DF stationary filters and GRINDEX grinding-dust extractors. ATEX dust collection is listed among products sold.

İstanbul

Vanterm

Dust Collector Design and Manufacturing

VANTERM designs and manufactures dust collectors for industrial dust collection and welding-fume filtration, with after-sales technical support. Equipment is made at the Gebze Organized Industrial Zone plant using modern production technology. After 2018 investments the plant reached 18,000 m². Collectors and filter units are sold in Turkey and worldwide through dealers.

Kocaeli̇ · Gebze Organized Industrial Zone

Onay Filtre Makina Sanayi ve Ticaret Ltd. Şti.

Turnkey System Installation

Çorum · Corum Organized Industrial Zone

Dusttek Endüstriyel Toz Toplama ve Filtrasyon Sistemleri

Turnkey Filtration Projects

İstanbul

Airpak Havalandırma Ltd. Şti.

Turnkey Filtration Systems

İstanbul · Birlik Organized Industrial Zone