Aquaflex
Bursa · Nilüfer
Aquaflex
Turnkey solutions for domestic and industrial wastewater treatment, seawater desalination and packaged plants; manufacturer of diffusers and treatment equipment.
About
Production profile
Company type
Activity types
Production capabilities
Industries served
Activity categories
Map
Location is approximate, based on the address. · © OpenStreetMap
Factory gallery
Products
9" Fine Bubble Disc Diffuser
The 9" disc diffuser is an aeration element installed on the floor of biological treatment tanks in a grid pattern, releasing air as fine bubbles through thousands of micro-slits in the membrane. On a 230 mm effective diameter there are 6800 slits; membrane material can be EPDM or silicone. The one-way membrane prevents sludge backflow when the system stops. Effective area is 0.039 m² and weight 0.65 kg; used in domestic and industrial activated sludge, MBR and SBR aeration grids.
APD1100 Plate Diffuser
The APD1100 plate diffuser is a fine-bubble aeration element whose rectangular body allows denser floor coverage than disc diffusers. It offers 0.20 m² effective area on a 185×1070 mm membrane surface with a 2-25 m³/h capacity range. EPDM and silicone membranes are available. It is preferred for deep activated-sludge tanks, plants with diurnal load swings and biological aeration ahead of MBR, delivering higher air capacity per connection point.
ATD-63 Fine Bubble Tube Diffuser
The ATD-63 tube diffuser is a fine-bubble aeration element with a 63 mm cylindrical body that mounts directly on the air distribution pipe. It suits narrow and deep tanks without a separate floor grid. Membrane options are EPDM, silicone, PTFE and HTPU; capacity is 0-40 m³/h and effective area 0.05-0.2 m². Suitable for partial grid upgrades, chemically aggressive industrial wastewater and plants planned for staged capacity growth.
Services
Seawater Desalination (SWRO)
We design and commission reverse-osmosis seawater desalination (SWRO) systems. Bringing roughly 35,000 mg/L salinity to potable levels depends on pretreatment that sets membrane life and OPEX; open intake often needs multimedia or UF, while well intake benefits from natural filtration. Energy recovery devices transfer concentrate pressure back to the feed to cut power use. Brine discharge is planned with a diffuser arrangement for adequate dilution; typical recovery is in the 40-45% range.
Industrial Wastewater Treatment
We build physical, chemical and biological treatment systems tailored to food, textile, chemical and metal industries. Design starts with characterisation of a representative sample and, when needed, lab or pilot treatability tests. A typical scheme combines physical pretreatment, coagulation-precipitation and a biological stage for organics; membranes or advanced oxidation are added for tight discharge or reuse. Existing plants can often raise capacity and performance by equipment and process upgrades while keeping tank volumes.
Domestic Wastewater Treatment
We provide biological domestic wastewater treatment for residential complexes, hotels and municipalities. Extended aeration activated sludge, MBR and SBR are selected according to population equivalent, diurnal flow variation, available footprint and discharge limits. Aeration often exceeds half of plant power use, so diffuser choice and grid layout drive operating cost. We deliver design through commissioning under one roof and reduce energy use with post-startup process optimisation.