Air Filtration &amp; Dust Collection Systems

ACROTECH dust collection systems filter process dust and particles at high efficiency. Filtration capacity is stated up to 99.9%; they also recover coating material. Cartridge units and cyclones catch all particle sizes. Cartridge collectors are listed with 99.9% efficiency, self-cleaning filters and coating recovery. The FAQ recommends a cartridge filter booth (98–99% recovery) when running one or few colours.

Kocaeli̇

Acrotech

Cyclone Dust Separator Systems

Cyclone Systems Product

The ACROTECH cyclone recovers more than 96% of inlet powder by centrifugal force. Dirty air enters the body and spirals down; particles are thrown to the wall. Clean air leaves up the centre tube. An automatic sieve under the cone recovers powder for reuse. Outlet direction is set by a damper. ATEX suitability for potentially explosive dust is stated. In cyclone booths, extracted powder particles are flung into the cyclone body by a 180-degree centrifugal spin.

Kocaeli̇

Havak

GRINDEX Grinding Dust Extractors

GRINDEX is made for dry grinding and tool sharpening, and for places where incandescent particles could damage filters. A water pre-separator extinguishes sparks before they reach the filter, cutting fire risk and pocket blinding. A manual mechanical shaker keeps efficiency. Extracted air can be returned to the room. Noise is about 70 dBA. High-permeability polyester pockets reach 95% efficiency, up to 99.99% in special duties. DF1 0.75 kW / 1450 m³/h; DF2 2.2 kW / 2280 m³/h.

İstanbul

Havak

Stationary Filter Units (IPERJET DF)

IPERJET DF is fitted with horizontal cartridges for welding fumes, fine and coarse dust, small particles and fumes from thermal cutting. It is for indoor use. Where local rules allow, filtered air can be returned to the room to save energy. A separator zone at the inlet drops most dust into the first tank; remaining dust is filtered into a second tank. The onboard high-performance fan runs at high suction and low noise. DF4 2200 m³/h, DF6 4000 m³/h, DF9 6500 m³/h; cartridges Ø325 × H750 mm, IFA/BGIA M PES polyester.

İstanbul

Havak

AIRALT Dust Collectors

Dirty air enters the hopper; with a sudden speed drop and a first-stage impact filter, large particles fall into the dust bin. Fine particles pass to the cartridges (AIRALT) or bags (AIRALT/M); air flows outside-in and dust collects on the outer surface. Jet-pulse cleaning blows compressed air inside-out. Standard cartridges/bags are IFA/BGIA L-PES polyester. At 0.056 m/s/m², 200 mg/m³ inlet loading and 0.2–2 μm particles, residual is

İstanbul

Ünveren

RP Modular U-TEX Cartridge Dust Collectors

UAS® RP modular U-TEX dust collectors are added together to reach the required capacity. Standard filters are U-TEX PTFE-coated cartridges. Units work by surface filtration and collect dust and emissions. Dirty cartridges are cleaned automatically by compressed-air nozzles with electronic sensing. Standard models: RP-2 2600 m³/h / 35 m² / 3 kW through RP-8 10400 m³/h / 140 m² / 15 kW. Dust bin 100 litres. Compressed air 6 bar – 80 l/min. Used on laser-plasma cutting tables, foundry, automotive, welding, metal polishing and blasting.

Adana · Adana Haci Sabanci Organized Industrial Zone

Ünveren

Wall-Mounted Auto-Clean U-TEX Filter Units

Wall-mounted auto-clean U-TEX units work by surface filtration. Cartridges are PTFE-coated so dust is separated before it enters the media. The system is intended for welding-fume extraction. Cartridges are cleaned automatically with compressed air through rotary blowers. Cleaned air is returned to the room at 99.9%. One-arm model: 2,200 m³/h fan, 1,200 m³/h capture, 1.5 kW. Two-arm: 3,000 m³/h fan, 2×1,000 m³/h, 3 kW. Arms from 2 to 10 m can be fitted. Production of wall-mounted stationary welding-smoke filters started in Turkey in 1992.

Adana · Adana Haci Sabanci Organized Industrial Zone

Ünveren

HCM-55 Filtered Grinding-Welding Tables

Welding Tables Product

The U-TEX cartridge cleans dirty air at 98% and returns it to the work area. A flame-arresting pre-filter and a washable metal filter form a three-stage spark trap before the filter chamber. Operation is surface filtration. Cartridges are pulse-cleaned at 6 bar. The S235JR steel grate is hot-dip galvanized to DIN 24537 and DIN EN ISO 1461. Fan 5000 m³/h, motor 5.5 kW 3000 rpm, 67 dB(A), max load 1000 kg, size 900×1500×900 mm. Uses: welding, grinding, deburring, polishing, blasting, plasma cutting.

Adana · Adana Haci Sabanci Organized Industrial Zone

Vanterm

KTM Work Tables

Welding Tables Product

KTM work tables combine a bench and a filter. They extract welding and grinding dust and fumes with an onboard fan group and ship plug-and-play. An integrated spark separator and metal pre-filter reduce fire risk in grinding. Extraction can be from below or from the rear. The metal pre-filter is washable; the dust filter is cleaned by semi-automatic jet-pulse. Noise is ≤ 70 dB(A). Applications include metal welding/grinding and dusty sanding or brushing.

Kocaeli̇ · Gebze Organized Industrial Zone

Vanterm

T-Series Work Tables

Sanding Tables Product

T-series tables capture welding emissions and dust from manual grinding with an angle grinder. Side covers open for larger workpieces. There is no filter inside the table; it must be connected to a central dust collector sized from the Vanterm range. Extraction is from the rear panel and from the lower grates. Coarse sparks fall into a dust drawer. Applications: manual sanding and grinding in metal shops, and dusty sanding or brushing.

Kocaeli̇ · Gebze Organized Industrial Zone

Vanterm

AC Filter Units

Turnkey Filtration Systems

AC filter units are designed for dry dust and particle emissions in metal fabrication shops. With a durable modular housing they are used as a central filter in welding or grinding halls, and in industrial processes that generate large amounts of dry dust. Capacity can be adapted by adding modules. Units are built plug-and-play even though they are central systems. They filter 0.2–2 micron particles at 99.9% and use pressostat-controlled automatic jet-pulse reverse-pulse cleaning.

Kocaeli̇ · Gebze Organized Industrial Zone

Services in This Category

Approved supplier service catalogs in this category.

Service type: 71 services

Acrotech

Turnkey Plant Installation

Wood painting plants are delivered turn-key with wet booths, curing ovens, positive-pressure rooms, sanding rooms and dust collection. Powder plants treat conveyors, curing ovens, booths and powder recovery as one turn-key package. Factory is in Çayırova/Kocaeli; office in Beykoz/Istanbul.

Kocaeli̇

Acrotech

Technical Support and Spare Parts

Acrotech Makina A.Ş. guarantees professional technical support always and everywhere. FAQ: all Acrotech products are under warranty; after-sales technical support, spare parts and periodic maintenance are offered. 24/7 WhatsApp +90 544 720 55 88. Spare parts for Wagner, Devilbiss and Acrotech are listed on the contact page. Hours: weekdays 08:00–18:00, weekend 09:00–13:00.

Kocaeli̇

Acrotech

Dust Collection System Design

Project-specific dust-collection design and quotation is offered on the site. Powder and wet-paint coating systems are designed per customer. As an engineering manufacturer Acrotech designs and builds powder plants, wet-paint plants, pretreatment lines and complete painting systems. FAQ: cartridge booth for one or few colours; cyclone booth (5–15 min colour change) when more than 5–6 colours per day.

Kocaeli̇

Havak

Service and Maintenance

Turnkey Filtration Systems

A service request form is published; the service department states it will respond promptly. Service e-mail is [email protected]. Address: Orhangazi Mah., ISISO Industrial Site, 19. Yol Sok. P Blok No:2, Esenyurt 34519 Istanbul. Phone +90 212 612 27 74. The GRINDEX page states the filter section can be removed without tools and cleaned after long use.

İstanbul

Havak

Coral Dust Collection Supply

HAVAK became distributor of Coral, one of Europe’s industrial ventilation manufacturers. Sold industrial lines include central dust collectors, central high-vacuum units, oil-mist extractors, mobile fume/dust extractors, VOC and gas filtration, IPERJET DF stationary filters and GRINDEX grinding-dust extractors. ATEX dust collection is listed among products sold.

İstanbul

Havak

Industrial Ventilation Engineering

Engineers analyse customer needs, offer solutions, or survey on site and produce project-specific solutions. In 2015 Havak took the Turkey distributorship of Italian Coral industrial dust collectors. Coral has made fume and dust extraction, filter units, exhaust extraction, high vacuum and ATEX equipment in Italy since 1958. TAI Ankara used a Coral Airalt ATEX industrial dust collector.

İstanbul

Ünveren

Installation and Service

Short delivery times are listed on the about page as a customer-satisfaction point. Product pages list on/off switch, warning lamps, 5 m mains cable and cable holder as standard. Acrobat arms and hoses on wall units and HCM tables are fitted on site. Shipments from the Adana OSB plant are described as stretch-film packed.

Adana · Adana Haci Sabanci Organized Industrial Zone

Ünveren

Industrial Air Systems Manufacturing

OEM Filter Manufacturing

Products are made in a 30,000 m² plant in Adana organized industrial zone and used in Turkey and many other countries. First Turkish acrobat arm (1988), mobile welding-smoke filter (1989), wall-mounted stationary filter (1992), automatic-cleaning grinding-welding table (1999) and modular cartridge dust collectors (2011) were started here. Continuous R&D is stated as company philosophy.

Adana · Adana Haci Sabanci Organized Industrial Zone

Ünveren

Project and Technical Support

Turnkey Filtration Systems

The contact page lists [email protected] and [email protected]. The about page states that the professional staff answers customer questions and requests quickly. The factory is 15 minutes from Adana airport and 40 minutes from the international port; road, air and sea freight are possible. Export countries exceeded 52 in 2021.

Adana · Adana Haci Sabanci Organized Industrial Zone

Vanterm

Dust Collector Design and Manufacturing

VANTERM designs and manufactures dust collectors for industrial dust collection and welding-fume filtration, with after-sales technical support. Equipment is made at the Gebze Organized Industrial Zone plant using modern production technology. After 2018 investments the plant reached 18,000 m². Collectors and filter units are sold in Turkey and worldwide through dealers.

Kocaeli̇ · Gebze Organized Industrial Zone

Vanterm

After-sales Technical Support

VANTERM supplies after-sales technical support with design and manufacture of dust collectors. From product selection through the order, client managers keep partners informed on planning, implementation and shipment. Dealers in the global network receive technical and engineering support from the VANTERM team.

Kocaeli̇ · Gebze Organized Industrial Zone

Vanterm

Process-Focused Filtration Engineering