İstanbul — Adhesive Dispensing Equipment Product (Adhesive Dispensing Equipment)

Assan Endüstriyel ve Dış Ticaret Ltd. Şti.

200 ml 1:1 AB Adhesive Dosing Gun

Adhesive Dispensing Equipment Product

The Araldite® and Wellmid® 200 ml 1:1 AB application gun (T428) is designed for use at different mix ratios of the cartridge adhesive. A dedicated cartridge and nozzle create the mix. The gun is built to transfer Araldite adhesive onto the surface in an even quantity. Under suitable storage the 200 ml products can be used for years in the application process. Contact 0216 307 01 20. Stock delivery and same-day dispatch are stated.

İstanbul

Assan Endüstriyel ve Dış Ticaret Ltd. Şti.

380/400 ml 1:1 AB Adhesive Application Gun

Adhesive Dispensing Equipment Product

The Araldite® and Wellmid® 380 ml/400 ml 1:1 AB application gun (T424) is designed for use at different mix ratios of the cartridge adhesive. A dedicated cartridge and nozzle create the mix. The gun is built to transfer adhesive from 380/400 ml Araldite products onto the surface in an even quantity. It can be used for years under suitable storage. It is also listed as a Turcite-B epoxy adhesive dosing gun.

İstanbul

Assan Endüstriyel ve Dış Ticaret Ltd. Şti.

50 ml 2:1 and 1:1 Adhesive Application Gun

Adhesive Dispensing Equipment Product

The Araldite® and Wellmid® 50 ml application gun (T363) is suitable for UTTS assemblies. 50 ml Araldite and Wellmid adhesives form the mix through a dedicated cartridge and nozzle. The gun transfers the mix from the pressurised cartridge evenly so Turcite® can be applied to the surface. Application and technical support are available from a specialist team on request. Contact +90 216 909 03 09. Not related to Assan Alüminyum; supplied from the Pendik Kurtköy office.

İstanbul

Kocayusuf Ağaç Makinaları San. ve Tic. Ltd. Şti.

3-Roller Glue Spreading and Dosing Machine

Adhesive Dispensing Equipment Product

The 3-roller glue spreader has working lengths 1300–1900–2300 mm, working gap 70 mm and three rollers. Drive-roller diameter is 2500 mm (2 pcs), dosing-roller diameter 2000 mm (2 pcs); an emergency-stop wire is fitted. Optional equipment: manual cleaning, automatic cleaning, heating system, CE. The heating system can be adapted to the adhesive type. Production is at Yukarı Dudullu OSB, Ümraniye.

İstanbul · Dudullu Organized Industrial Zone

Kocayusuf Ağaç Makinaları San. ve Tic. Ltd. Şti.

4-Roller Hot-Melt Glue Spreading Line

Adhesive Dispensing Equipment Product

The 4-roller line has working lengths 1300–1900–2300 mm, working gap 70 mm and four rollers. Drive-roller diameter is 2500 mm (2 pcs), dosing-roller diameter 2000 mm (2 pcs); an emergency-stop wire is fitted. Options: manual cleaning device, heating system, CE. Kocayusuf hot-melt glue spreading lines are built with custom sizes and technical features. Adhesive type and properties are the main criteria when selecting a glue spreader.

İstanbul · Dudullu Organized Industrial Zone

Kocayusuf Ağaç Makinaları San. ve Tic. Ltd. Şti.

2-Roller Glue Spreader

Adhesive Dispensing Equipment Product

Kocayusuf manufactures glue spreaders that apply any adhesive to all surfaces. Machines are built 1, 2, 3 or 4 rollers to order; rollers are rubber, nitrile, silicone, ebonite, polyurethane or chrome-covered. The 2-roller type has 40 mm working length, 70 mm working gap, two rollers, 1650 mm drive-roller diameter (2 pcs) and an emergency-stop wire. Options: manual or automatic cleaning, heating system, CE. Built at Dudullu OSB 1st Cadde No:30.

İstanbul · Dudullu Organized Industrial Zone

AAS Group Makina Kimya ve Amb. San. Tic. A.Ş.

Schütze Cold-Glue Spray Valves

Adhesive Dispensing Equipment Product

AAS offers a Schütze range from material supply through distribution, pressure control, filtration and application equipment. Automatic spray valves include MKDD-IS, GF/3, GF/4, ASV, KA-2 and MFS series. MKDD-IS is a spray valve developed for adhesive application; it runs intermittent or continuous, with an integrated atomising-air valve to set post-blow for nozzle cleaning. Material pressure max. 35 bar, control air min. 5–6 bar, intermittence up to 30 cycles/s; stainless body, nozzles 0.2–2.5 mm.

İstanbul

AAS Group Makina Kimya ve Amb. San. Tic. A.Ş.

ITW Dynatec Hot Melt Adhesive Applicators

Adhesive Dispensing Equipment Product

AAS Makina sells ITW Dynatec hot-melt adhesive application equipment for disposable hygiene, coating and lamination, packaging and product assembly. The applicator range covers slot, precision metering, bead, spray and special applicator technologies. A system comprises a hot-melt unit, hoses and applicator heads. Sales and technical support are from Kartal/Istanbul; AAS holds ITW Dynatec representation for Türkiye, the Middle East and the Caucasus.

İstanbul

AAS Group Makina Kimya ve Amb. San. Tic. A.Ş.

ITW Dynatec ASU Melters and Bulk Melters

Adhesive Dispensing Equipment Product

Hot-melt adhesive supply units (ASU) and bulk hot-melt melters are part of the ITW Dynatec range. Pelletized hot-melt adhesive feed systems are also listed. Since 2006 AAS has imported hot and cold adhesive systems, equipment and spare parts; it is a full adhesive-system supplier, not only an adhesive seller. Melter selection and spare parts for hygiene, packaging, coating and lamination lines run through AAS.

İstanbul

Sinerji Grup Endüstri Otomasyon Tic. ve San. Ltd. Şti.

Piezo Jet, Shockwave Jet and Volume Dispense Valves

Adhesive Dispensing Equipment Product

Essemtec dispensers use five valve families. Piezo Jet: SMD adhesives, underfill, silver epoxy, UV adhesives, globe top, encapsulation; low–high viscosity; 2,000,000 dots/h, BGA jet-on-the-fly 780,000 dots/h. Shockwave Jet: solder paste and liquid metal; 1,100,000 dots/h, average 350,000 dots/h. Volume valve: underfill, gasketing, globe top, dam and fill at 26,000 dots/h (BGA). Screw 30,000 and time-pressure 38,000 dots/h. Cartridges 5–55 cm³; needle heating and vacuum cleaning are optional.

İstanbul

Sinerji Grup Endüstri Otomasyon Tic. ve San. Ltd. Şti.

Essemtec Tarantula Jet Printer and Dispenser

Adhesive Dispensing Equipment Product

Tarantula is a jet printer and dispenser for demanding lines. Applications include solder paste, SMT glue, LED encapsulation, silver epoxy, dam and fill, underfill, cavity fill and 3D dispensing with laser height mapping. Up to three processes and three valves can run together. PCB size is 560 x 610 mm, optional 1,800 x 610 mm, with programmable Z stroke up to 80 mm. Piezo Jet is for low viscosity at high speed; Shockwave Jet, volume, time/pressure and Archimedean screw valves are supported.

İstanbul

Sinerji Grup Endüstri Otomasyon Tic. ve San. Ltd. Şti.

Essemtec Spider High-Speed Jet Dispenser

Adhesive Dispensing Equipment Product

Spider is a compact high-speed jet dispenser. It covers solder paste, SMT adhesive, LED encapsulation, silver epoxy, dam and fill, underfill, cavity fill and 3D dispensing with laser height mapping. It runs up to two valves at once and supports five valve types (Piezo Jet, Shockwave Jet, volume, screw, time-pressure). Valve performance reaches 1,100,000 dots/h and up to 2,000,000 dots/h in line mode. Floor space is about 1 m²; the unit fits a 90 cm doorway. Symmetrical mineral-cast body reduces vibration.

İstanbul

Pro SMT Elektronik A.Ş.

PVA Delta 6 / Sigma Dispense and Coating Robots

Adhesive Dispensing Equipment Product

PVA Delta 6 is used for selective conformal coating, liquid gasket, potting, 2-component mix-and-dose and fluid dispense. Delta 8 is the same with a 621×595 mm work area for larger parts. PVA Sigma is a 3-axis bench robot for programmable selective coating, adhesive dispensing, liquid gasket and potting. PVA machines state 5 micron positioning and 25 micron repeatability; PathMaster software is included. The range covers valves, material tanks, pumps and special automation. ProSMT is PVA’s Turkey channel.

İstanbul

Pro SMT Elektronik A.Ş.

ProDisp DD120P Fully Automatic 1K Dispenser

Adhesive Dispensing Equipment Product

The fully automatic 1K dispenser DD120P is used for potting and dispensing one-component or pre-mixed adhesives and resins — solder paste, epoxy, silicone, PU and similar. The PCB coating page names it together with filling capacitors, power supplies, transformers, ignition coils and other parts that must be bonded with potting resins. Advanced dispensing systems apply liquid resin, silicone or epoxy to set points on the board. Supply is from Tuzla, Turna Sok. No:23/B showroom and warehouse.

İstanbul

Pro SMT Elektronik A.Ş.

ProDisp DD70P-2 / PGB-700 2K Potting Dispenser

Adhesive Dispensing Equipment Product

Liquids A and B are held in separate tanks; two metering pumps empty the tanks, mix in the mixer tube and dispense to programmed data. PGB-700 meters, mixes and dispenses two-component medium-to-low viscosity materials at 1:1 to 10:1 for gasketing, sealing, encapsulation and syringe fill. Work area 700×700×80 mm; meter/mix accuracy ±1%; output 1–15 g/s; viscosity under 20000 cps; PLC+touch screen; gear pump; 1500×1200×1500 mm, about 260 kg. Vacuum stops drip; tank mixing, degassing and heating are optional.

İstanbul

AAT Makina Sanayi ve Ticaret A.Ş.

MiniBlue II Hot Melt Applicator Guns

Adhesive Dispensing Equipment Product

MiniBlue II is stated as the longest-life pneumatic hot-melt applicator gun in packaging. Variants: slim line, standard wide body, low profile and SureBead self-cleaning. Ball&Seat design and a patented hydraulic seal give long leak-free life. Dose times down to 2 ms suit high speed; compact size fits tight machine space. Optibond solutions are used to cut adhesive use by up to 50%. Nordson product literature is published on the AAT site.

İstanbul

AAT Makina Sanayi ve Ticaret A.Ş.

H20 Automatic Hot Melt Guns

Adhesive Dispensing Equipment Product

H20 guns keep consistent high-flow, intermittent product-assembly with high-viscosity hot melts and filled thermoplastics. A long-life cartridge design extends service life. Air-open spring-close (AO/SC) exceeds 3,000 cycles/min. Choose controlled single-orifice, precision multi-orifice or extended nozzle assemblies. Configurations include water-resistant design, integral-filter bodies, nozzle extensions, variable temperature control and integral seated nozzles. Extrusion modules are easy to clean and replace.

İstanbul

AAT Makina Sanayi ve Ticaret A.Ş.

Nordson VersaBlue Adhesive Melters

Adhesive Dispensing Equipment Product

VersaBlue melters apply precision dosing with gear metering and variable-speed drives on demanding jobs. Tank sizes are 12, 25, 50 and 100 litres. Pump size can be chosen per outlet; large melters upgrade to four pumps. A touch screen shows temperature and motor speeds on one display. Staged melting and a special tank-grid design minimise adhesive burn and degradation. AAT is Nordson’s sole authorised Turkey distributor.

İstanbul

3a Tutkal Uygulama Teknolojileri San. ve Tic. Ltd. Şti.

A4 Manual Hot Melt Gun

Adhesive Dispensing Equipment Product

Valco Melton’s A4 hot-melt hand gun simplifies applications by offering design options in a reduced size. The compact hand-held gun is built to endure rough conditions and a longer life of quality applications. Features: easy pattern conversion; 1,500,000 cycles of guaranteed durability; a flexible housing that protects cables; a 360-degree hose swivel that stops twisting; a vertical hand-gun option; bottom and top adhesive inlets.

İstanbul · Istanbul Tuzla Kimya Sanayicileri Organized Industrial Zone

3a Tutkal Uygulama Teknolojileri San. ve Tic. Ltd. Şti.

EcoStitch Electric Hot Melt Guns

Adhesive Dispensing Equipment Product

Valco Melton’s EcoStitch electric gun series is for high-speed lines, high cycle rates and long service life. The valve can reach 3000 cycles/min in continuous running and is rated to 300 million cycles. An integrated filter is in the dispenser; it is compatible with industry-standard hoses and tanks. Modular design allows quick change and different valve layouts. A ceramic seat and carbide-tipped pump mount cut wear; a solenoid valve gives accurate glue lengths at high speed.

İstanbul · Istanbul Tuzla Kimya Sanayicileri Organized Industrial Zone

3a Tutkal Uygulama Teknolojileri San. ve Tic. Ltd. Şti.

Valco Melton KUBE Hot Melt Dispensing System

Adhesive Dispensing Equipment Product

KUBE is a melt-on-demand hot-melt dispenser with three mounts: panel, machine and split. An enclosed body and integrated autofeeder cut adhesive degradation and maintenance. It suits case and carton sealing and tray making; the grid melts 9–12 kg/h and pumps more than 30 kg/h. Up to 6 hoses/guns; ME dual-acting, MKF Minigun and EcoStitch guns. Auto Pressure Dump, multi-function control and a manual-fill option so the line need not stop in an emergency.

İstanbul · Istanbul Tuzla Kimya Sanayicileri Organized Industrial Zone

Silter İleri Ütüleme Sistemleri San. ve Tic. Ltd. Şti. (siltronics Doser)

5:1 Two-Component and Pressure-Tank Systems

Adhesive Dispensing Equipment Product

The homepage shows a SILTRONICS 5:1 two-component dosing machine. The multi-component text states different chemicals are mixed homogeneously at the required ratios and dosed. Pressure tanks are a separate product category. Applications listed include drip, spray, brush-tip and circular dosing. Dosing units and consumables (needles, syringes) are offered to defence, automotive, white-goods, medical and food manufacturers. The plant is Mimarsinan, Eski Silivri Yolu Cd. 42-44, Büyükçekmece.

İstanbul

Silter İleri Ütüleme Sistemleri San. ve Tic. Ltd. Şti. (siltronics Doser)

Doser Control Units and Dosing Valves

Adhesive Dispensing Equipment Product

Siltronics describes itself as Turkey’s domestic dosing-valve maker and states it offered the first digital touch dosing system in Turkey. Control units and valves are a separate catalogue group. Operator-controlled manual dosing uses a syringe, valve and control-unit combination. A Doser control unit with vacuum is listed. Multiple valves can dose several parts at once to a standard. SY DS MDV 10 D minor-type valve appears in the silter.ist catalogue.

İstanbul

Silter İleri Ütüleme Sistemleri San. ve Tic. Ltd. Şti. (siltronics Doser)

CNC Adhesive Dosing Machines

Adhesive Dispensing Equipment Product

Siltronics’ CNC dosing system applies liquids at millimetre accuracy, giving even, repeatable results on complex geometries and removing material waste. The catalogue lists a dual-head 3-axis CNC dosing machine and a multi-fixture 3-axis CNC for silicone. A bench SPR DS 10 CNPC 4040 STP open-cabin 400×400 stepper aluminium-body model is also listed. Applications include coating, potting, circular dosing and liquid gasketing. Production is at the 25,000 m² Büyükçekmece plant.

İstanbul