Tanpera A.Ş.
İstanbul · Pendi̇k
Tanpera A.Ş.
TANPERA is a dynamic company active in heat transfer, thermal storage, and heat energy systems.
About
Production profile
Company type
Activity types
Production capabilities
Materials worked
Manufacturing processes
Certifications
Export profile
Industries served
Activity categories
Target export markets
Germany
Factory gallery
Products
Buffer Thermal Balance Tank
A buffer thermal balance tank adds water volume to a cooling circuit and reduces temperature swings. Tanpera BF tanks are delivered in the 100–5000 litre range, insulated and with flanged connections. The shell is carbon steel or stainless steel; insulated models minimise heat loss. In chilled-water applications the tank increases system water volume; a baffle plate matched to the volume supports homogeneous distribution and air separation. It provides hydraulic balance on chiller and heat-pump circuits and is recommended for data-centre cooling, central chiller plants, and industrial process cooling. Delivered with an insulated shell and double-layer anti-corrosion protection.
Gasketed Plate Heat Exchanger
Tanpera Gasketed Plate Heat Exchangers increase the heat transfer coefficient through turbulence on the plate surfaces while delivering high capacity in compact dimensions. Gasketed or welded design options are selected according to fluid compatibility and operating pressure. Plates are typically manufactured from AISI 304 or AISI 316 stainless steel; for aggressive fluids, titanium or special alloys are used. Gasket materials are selected as EPDM, NBR, or Viton according to fluid temperature and chemistry. Thanks to the modular plate pack, capacity can be increased or reduced in a controlled manner on site. Applications include HVAC, food and beverage pasteurization, chemical and petrochemical processes, and energy recovery.
Spiral Heat Exchangers
Tanpera Spiral Heat Exchangers provide reliable heat transfer for fluids with high solids content such as sludge, wastewater, pulp, high-viscosity hydrocarbons, and fiber-laden liquids. Channel height can be designed in the 6–50 mm range, suitable for continuous operation with dirty fluids. Single-piece or openable body options offer ease of maintenance and cleaning. Channels and body are typically AISI 304/316 stainless steel; duplex or special alloys are used for aggressive chemicals. Typical sectors are pulp and paper, wastewater heating, chemical processes, food production, and marine. Manufactured at the Gebze Free Zone facility.
Services
Boiler and Accumulation Tank Maintenance
Boilers and accumulation tanks should be maintained at least once a year. Parts that need replacement, such as anode rods and heating elements, should be checked regularly and replaced when necessary. Tanpera provides maintenance for systems of its own manufacture as well as for all brands and models. Boiler maintenance steps include corrosion checks, leak checks, anode and coil checks, internal cleaning, and earthing/grounding checks. The service desk is reachable at [email protected] and +90 533 621 06 72. Periodic maintenance is offered so equipment operates for a long life, efficiently and safely.
Plate Heat Exchanger Maintenance
Tanpera offers professional maintenance on site or in the workshop for every heat exchanger brand and model — especially Tanpera, Danfoss, and Sondex. The process covers plate disassembly, wear/scaling/deformation checks, chemical cleaning of plate surfaces, gasket renewal with original or compatible gaskets when needed, hanger-bar inspection and adjustment, and delivery after system tests. Plate, gasket, heating-element, and anode supply and replacement are part of the service offering. For clean fluids an annual inspection may suffice; for scale or biofilm risk, plate cleaning every 6–12 months is recommended.
Project Engineering, Installation and Commissioning
From site surveys and on-site measurements through cost analysis, system design, assembly, installation, commissioning, and supervision, Tanpera supports projects end to end. Before installation, hydraulic connections, filtration, and expansion solutions are planned to match the project design; during commissioning, pressure testing, flow adjustment, and temperature control are performed. The technical team provides field support and user training. With energy-recovery solutions and a range including economizers, recuperators, Combox, boilers, heat exchangers, and pumped expansion tanks, a project-specific engineering approach is applied to new investments and system renewals.