Product description
More from this company
Sempa Pompa Makina A.Ş.
TKF Series Single-Stage End Suction Pumps
Centrifugal PumpHorizontal-shaft, volute-casing, single-stage, end-suction centrifugal pumps with closed impellers; main dimensions to EN 733. Discharge flange DN 32 - DN 250, flow up to 1750 m³/h, head up to 100 m, operating temperature -25 °C to +140 °C, casing pressure 10 bar (16 bar). Back pull-out design allows the rotor assembly to be removed without disconnecting the volute from the piping; impellers balanced to ISO 1940 grade 6.3.
Konya · Konya Organized Industrial Zone
Sempa Pompa Makina A.Ş.
DPT Series Wastewater Pump
Centrifugal PumpVertical-shaft, wide-volute, single-stage submersible centrifugal wastewater pumps with closed, semi-open or vortex (free-flow) impellers; 20 basic sizes. Discharge flange DN 50 - DN 400, flow up to 3000 m³/h, head up to 100 m, operating temperature up to +40 °C, casing pressure 10 bar. The electric motor is IP68 rated; a motor cooling system can be fitted on request for models above 11 kW.
Konya · Konya Organized Industrial Zone
Related products
Etna Pompa (alp Pompa Teknolojileri Tic. ve San. A.ş.)
KO Series Vertical Multistage Pump
Centrifugal PumpHigh-quality, compact, high-efficiency vertical multistage pumps; the bottom-inlet, top-outlet connection takes little space in booster systems. GG25 cast iron pump body, Noryl impeller and diffuser, AISI 420 stainless steel shaft, carbon/ceramic/EPDM mechanical seal. Maximum flow 60 m³/h, maximum pressure 200 mWC, 2900 rpm, IP54, insulation class F, PN16. Used for pressurised water supply in residential and commercial buildings, garden and agricultural irrigation, industrial applications and clean water transfer.
İstanbul · Dudullu Organized Industrial Zone
Etna Pompa (alp Pompa Teknolojileri Tic. ve San. A.ş.)
ESC Series Double-Suction Split-Case Pump
Centrifugal PumpESC series horizontal double-suction split-case centrifugal pumps offer high efficiency and durability for high-flow applications. Double suction reduces axial thrust; suction and discharge flanges are on the same axis and the two-part casing can be opened for maintenance without removing the pipework. GG25 cast iron casing, AISI420 stainless steel shaft, bronze impeller, soft gland packing. Maximum flow 1250 m³/h, maximum head 225 mWC, 2900 rpm, maximum operating temperature +105 °C. For water supply, fire fighting, irrigation, HVAC, mining and marine applications.
İstanbul · Dudullu Organized Industrial Zone
Teknopomp Teknolojik Pompa ve Hidrofor Sistemleri Ticaret ve Sanayi Ltd. Şti.
TNP Single Stage End Suction Centrifugal Pump
Centrifugal PumpSingle stage, end suction, bearing-supported centrifugal volute pump complying with TS EN 733 for non-corrosive clean water. Suitable for non-abrasive, low-viscosity liquids free of solids and fibres, clean or very slightly contaminated (solid particle ratio up to 0.02). Used for heating, cooling and air-conditioning circulation, construction and industrial water supply, agricultural irrigation and fire fighting systems.
Kocaeli · Kocaeli Gebze VI(IMES)Makine Ihtisas Organized Industrial Zone
Teknopomp Teknolojik Pompa ve Hidrofor Sistemleri Ticaret ve Sanayi Ltd. Şti.
TNL In-Line Dry Rotor Circulation Pump
Centrifugal PumpVertical shaft, single stage, in-line dry rotor circulation pump for non-corrosive clean water. Capacity 0-360 m3/h, total head up to 100 m, motor power up to 45 kW, operating temperature up to 90 °C and working pressure 10 bar. Available with frequency control panel or motor-mounted frequency inverter; used in heating, cooling, air-conditioning and industrial circulation systems.
Kocaeli · Kocaeli Gebze VI(IMES)Makine Ihtisas Organized Industrial Zone