Product description
More from this company
Etna Pompa (alp Pompa Teknolojileri Tic. ve San. A.ş.)
ESC Series Double-Suction Split-Case Pump
Centrifugal PumpESC series horizontal double-suction split-case centrifugal pumps offer high efficiency and durability for high-flow applications. Double suction reduces axial thrust; suction and discharge flanges are on the same axis and the two-part casing can be opened for maintenance without removing the pipework. GG25 cast iron casing, AISI420 stainless steel shaft, bronze impeller, soft gland packing. Maximum flow 1250 m³/h, maximum head 225 mWC, 2900 rpm, maximum operating temperature +105 °C. For water supply, fire fighting, irrigation, HVAC, mining and marine applications.
İstanbul · Dudullu Organized Industrial Zone
Etna Pompa (alp Pompa Teknolojileri Tic. ve San. A.ş.)
ECP 25 Series Wet Rotor Circulation Pump
General PumpsFrequency-controlled wet rotor circulation pumps compliant with the ecodesign-ErP 2009/125/EC directive, used to circulate hot water in heating systems. Factory settings usually allow commissioning without extra adjustment, they run with low system noise and consume less energy than conventional 3-speed circulators. Maximum flow 12 m³/h, maximum head 12 mWC, port-to-port length 130-180 mm, union size 1 ½", pipe size 1". A stainless steel body (N) version is also available.
İstanbul · Dudullu Organized Industrial Zone
Related products
Sempa Pompa Makina A.Ş.
TKF Series Single-Stage End Suction Pumps
Centrifugal PumpHorizontal-shaft, volute-casing, single-stage, end-suction centrifugal pumps with closed impellers; main dimensions to EN 733. Discharge flange DN 32 - DN 250, flow up to 1750 m³/h, head up to 100 m, operating temperature -25 °C to +140 °C, casing pressure 10 bar (16 bar). Back pull-out design allows the rotor assembly to be removed without disconnecting the volute from the piping; impellers balanced to ISO 1940 grade 6.3.
Konya · Konya Organized Industrial Zone
Sempa Pompa Makina A.Ş.
SCE Series Split Case Pumps
Centrifugal PumpDouble-suction split case centrifugal pumps with suction and discharge flanges on the lower casing on a common axis. Discharge flange DN 65 - DN 600, flow up to 6000 m³/h, head up to 180 m, operating temperature -25 °C to +140 °C, casing pressure 16 bar (25 bar). The double-suction design reduces axial forces; available with horizontal or vertical shaft, and replaceable wear rings protect the casing.
Konya · Konya Organized Industrial Zone
Sempa Pompa Makina A.Ş.
DPT Series Wastewater Pump
Centrifugal PumpVertical-shaft, wide-volute, single-stage submersible centrifugal wastewater pumps with closed, semi-open or vortex (free-flow) impellers; 20 basic sizes. Discharge flange DN 50 - DN 400, flow up to 3000 m³/h, head up to 100 m, operating temperature up to +40 °C, casing pressure 10 bar. The electric motor is IP68 rated; a motor cooling system can be fitted on request for models above 11 kW.
Konya · Konya Organized Industrial Zone
Teknopomp Teknolojik Pompa ve Hidrofor Sistemleri Ticaret ve Sanayi Ltd. Şti.
TNP Single Stage End Suction Centrifugal Pump
Centrifugal PumpSingle stage, end suction, bearing-supported centrifugal volute pump complying with TS EN 733 for non-corrosive clean water. Suitable for non-abrasive, low-viscosity liquids free of solids and fibres, clean or very slightly contaminated (solid particle ratio up to 0.02). Used for heating, cooling and air-conditioning circulation, construction and industrial water supply, agricultural irrigation and fire fighting systems.
Kocaeli · Kocaeli Gebze VI(IMES)Makine Ihtisas Organized Industrial Zone