Product description
More from this company
Etna Pompa (alp Pompa Teknolojileri Tic. ve San. A.ş.)
KO Series Vertical Multistage Pump
Centrifugal PumpHigh-quality, compact, high-efficiency vertical multistage pumps; the bottom-inlet, top-outlet connection takes little space in booster systems. GG25 cast iron pump body, Noryl impeller and diffuser, AISI 420 stainless steel shaft, carbon/ceramic/EPDM mechanical seal. Maximum flow 60 m³/h, maximum pressure 200 mWC, 2900 rpm, IP54, insulation class F, PN16. Used for pressurised water supply in residential and commercial buildings, garden and agricultural irrigation, industrial applications and clean water transfer.
İstanbul · Dudullu Organized Industrial Zone
Etna Pompa (alp Pompa Teknolojileri Tic. ve San. A.ş.)
ECP 25 Series Wet Rotor Circulation Pump
General PumpsFrequency-controlled wet rotor circulation pumps compliant with the ecodesign-ErP 2009/125/EC directive, used to circulate hot water in heating systems. Factory settings usually allow commissioning without extra adjustment, they run with low system noise and consume less energy than conventional 3-speed circulators. Maximum flow 12 m³/h, maximum head 12 mWC, port-to-port length 130-180 mm, union size 1 ½", pipe size 1". A stainless steel body (N) version is also available.
İstanbul · Dudullu Organized Industrial Zone
Related products
Sempa Pompa Makina A.Ş.
TKF Series Single-Stage End Suction Pumps
Centrifugal PumpHorizontal-shaft, volute-casing, single-stage, end-suction centrifugal pumps with closed impellers; main dimensions to EN 733. Discharge flange DN 32 - DN 250, flow up to 1750 m³/h, head up to 100 m, operating temperature -25 °C to +140 °C, casing pressure 10 bar (16 bar). Back pull-out design allows the rotor assembly to be removed without disconnecting the volute from the piping; impellers balanced to ISO 1940 grade 6.3.
Konya · Konya Organized Industrial Zone
Sempa Pompa Makina A.Ş.
SCE Series Split Case Pumps
Centrifugal PumpDouble-suction split case centrifugal pumps with suction and discharge flanges on the lower casing on a common axis. Discharge flange DN 65 - DN 600, flow up to 6000 m³/h, head up to 180 m, operating temperature -25 °C to +140 °C, casing pressure 16 bar (25 bar). The double-suction design reduces axial forces; available with horizontal or vertical shaft, and replaceable wear rings protect the casing.
Konya · Konya Organized Industrial Zone
Sempa Pompa Makina A.Ş.
DPT Series Wastewater Pump
Centrifugal PumpVertical-shaft, wide-volute, single-stage submersible centrifugal wastewater pumps with closed, semi-open or vortex (free-flow) impellers; 20 basic sizes. Discharge flange DN 50 - DN 400, flow up to 3000 m³/h, head up to 100 m, operating temperature up to +40 °C, casing pressure 10 bar. The electric motor is IP68 rated; a motor cooling system can be fitted on request for models above 11 kW.
Konya · Konya Organized Industrial Zone
Teknopomp Teknolojik Pompa ve Hidrofor Sistemleri Ticaret ve Sanayi Ltd. Şti.
TNP Single Stage End Suction Centrifugal Pump
Centrifugal PumpSingle stage, end suction, bearing-supported centrifugal volute pump complying with TS EN 733 for non-corrosive clean water. Suitable for non-abrasive, low-viscosity liquids free of solids and fibres, clean or very slightly contaminated (solid particle ratio up to 0.02). Used for heating, cooling and air-conditioning circulation, construction and industrial water supply, agricultural irrigation and fire fighting systems.
Kocaeli · Kocaeli Gebze VI(IMES)Makine Ihtisas Organized Industrial Zone