Product description
More from this company
Oğuzmak Mühendislik Gıda İnşaat Makina Sanayi ve Ticaret Ltd. Şti.
Aspirators and Pneumatic Fans
Air Filtration & Dust Collection Systems ProductIndustrial fans are used in ventilation, aspiration and process applications. Different capacity and pressure options provide a solution matched to the need. Features are high efficiency, a wide capacity range, low vibration and a custom design option. The company builds ventilation systems and industrial fans, including silo-top aspirator fans referenced in its project list.
Konya · Büyükkayacık Organized Industrial Zone
Oğuzmak Mühendislik Gıda İnşaat Makina Sanayi ve Ticaret Ltd. Şti.
Blower Airlock
General Hydraulics & PneumaticsBlower airlocks provide material feeding and air tightness in pneumatic conveying lines. They are produced with a durable structure and precision manufacturing quality. Features are air tightness, durable structure, precision manufacturing, various capacity options and easy installation. The company started manufacturing blower airlocks and pneumatic directional dampers in 2002.
Konya · Büyükkayacık Organized Industrial Zone
Related products
Elmalı Makina Sanayi ve Ticaret Ltd. Şti.
Hydraulic Deep Drawing Press
General Machine ManufacturingThe hydraulic deep-drawing press EHSP series is listed from EHSP-100 to EHSP-2500. Pressure ratings run from 100/40 ton to 2500/800 ton, stroke from 600 mm to 1000 mm, motor power from 11 kW to 180 kW and press weight from 9000 kg to 132000 kg. EHSP-100 has a 1000x1200 mm table, a 1000x1200 mm ram and a 700 mm table-to-ram distance. EHSP-2500 has an 1800x2600 mm table, main cylinder diameter Ø565x4 and a maximum working pressure of 250 bar. Standard equipment is a steel-construction frame, a ram guided on 8 faces, PLC and screen, T-slot bed and ram, stroke and pressure set from the screen, automatic central lubrication, two-hand control, an electric counter and a linear scale. Options are a light curtain, CE conformity, custom table and stroke, an electronically regulated pump and proportional pressure and speed control.
Konya
Elmalı Makina Sanayi ve Ticaret Ltd. Şti.
C-Frame Eccentric Press EEPY Series
General Machine ManufacturingThe C-frame eccentric press EEPY series is listed from EEPY 15 to EEPY 300, with capacity from 15 ton to 300 ton. EEPY 15 has 140 mm throat depth, 10-50 mm stroke adjustment, 50 strokes per minute, a 2.2 kW motor and a weight of 800 kg. EEPY 300 has 370 mm throat depth, 20-200 mm stroke adjustment, 38 strokes per minute, 30+2.2 kW motor power and a weight of 13200 kg. Standard features are PLC and screen, a steel-construction frame, steel castings for ram, connection rod and knuckle, a pneumatic clutch and brake, a ram guided on 4 faces, ratchet ram adjustment, a mechanical overload fuse, T-slot main and bolster plates, single and continuous stroking, pedal and two-hand control, central lubrication, an electric counter and gears running in oil. Options include a speed control unit, automatic central lubrication, a light curtain, CE conformity, 8-face ram guiding, ram cushion cylinders, a hydraulic overload fuse, non-standard table and stroke, and anti-vibration mounts.
Konya
Cematek Mühendislik Makina İnş. İml. San. ve Tic. Ltd. Şti.
Corner Bead Production Lines
General Machine ManufacturingCematek corner-bead production lines make plaster corner beads, gypsum corner beads and depth-gauge (ano) profiles used under plaster. The line is a universal layout with a decoiler, servo-fed pneumatic-clutch eccentric press, straightener, rollformer, cut-off unit and tilting table. Standard speed is 50 m/min for gypsum corner and gauge profiles and 24 m/min for plaster corner bead. Material is galvanized sheet, 0.25–0.50 mm thick and up to 80 mm wide. The decoiler is single-head with a 1,300 mm outside coil diameter. The eccentric press is 35 tonnes at 350 strokes/min, with an eight-face ball-guide and a stress-relieved H-frame. The rollformer has 6 conventional stations, manual roll change and about 30 minutes of profile setup. Drive is a Ç8620 gear train, the gearmotor is Yılmaz and the bearings are SKF, FAG or Timken. Cematek states that profiles from the line meet the performance criteria of EN 13658.
Ankara · Baskent Organized Industrial Zone
Cematek Mühendislik Makina İnş. İml. San. ve Tic. Ltd. Şti.
Gypsum Board Profile Production Lines
General Machine ManufacturingCematek gypsum-board profile lines produce the metal profiles used in wall and ceiling plasterboard frames. The line makes ceiling U and C (UD, CD), wall U and C (UW, CW), stud, track, main channel, furring channel and wall angle in the sizes required for the application. Profiles are galvanized sheet; dies and rolls are designed and made at Cematek. Standard speed is 60 m/min for unpunched profiles and 30 m/min for punched profiles. Maximum strip width is 197 mm and thickness is 0.30–0.60 mm. The decoiler is a braked, non-driven single head for a 1,300 mm outside coil diameter. The rollformer has 12 conventional stations; shafts and rolls are Ç4140 at 54–57 HRC and the drive is a Ç8620 gear train. The flying cut-off uses a Mitsubishi servomotor and an Italian hydraulic pump, with a length tolerance of +/-3 mm. PLC and drives are Siemens or Mitsubishi. Cematek states that profiles from the line meet the performance criteria of EN 14195.
Ankara · Baskent Organized Industrial Zone