Product description
More from this company
Elmalı Makina Sanayi ve Ticaret Ltd. Şti.
Hydraulic Deep Drawing Press
General Machine ManufacturingThe hydraulic deep-drawing press EHSP series is listed from EHSP-100 to EHSP-2500. Pressure ratings run from 100/40 ton to 2500/800 ton, stroke from 600 mm to 1000 mm, motor power from 11 kW to 180 kW and press weight from 9000 kg to 132000 kg. EHSP-100 has a 1000x1200 mm table, a 1000x1200 mm ram and a 700 mm table-to-ram distance. EHSP-2500 has an 1800x2600 mm table, main cylinder diameter Ø565x4 and a maximum working pressure of 250 bar. Standard equipment is a steel-construction frame, a ram guided on 8 faces, PLC and screen, T-slot bed and ram, stroke and pressure set from the screen, automatic central lubrication, two-hand control, an electric counter and a linear scale. Options are a light curtain, CE conformity, custom table and stroke, an electronically regulated pump and proportional pressure and speed control.
Konya
Elmalı Makina Sanayi ve Ticaret Ltd. Şti.
Hydraulic Press Brake
Press BrakeThe hydraulic press brake EHAP series is listed from EHAP-4x1300 to EHAP-12x4100. Bending force runs from 30 ton to 300 ton, bending length from 1300 mm to 4100 mm, bending capacity from 4 mm to 12 mm and stroke from 125 mm to 250 mm. EHAP-4x1300 has 80 mm/s approach, 10 mm/s bending and 70 mm/s return, 4 kW total motor power and a weight of 2000 kg. EHAP-12x4100 has 80 mm/s approach, 7 mm/s bending and 50 mm/s return, 30 kW motor power and a weight of 14500 kg. Standard equipment is a steel-construction frame, standard upper and lower tools, a digital NC that programs stroke and back-gauge axes together, a ball-screw back gauge, Promecam clamping, front support arms, a two-speed cycle and a pressure switch. Options are segmented hardened tools, special bending tools, a light curtain, a rear safety guard, non-standard throat depth and CE conformity.
Konya
Related products
Cematek Mühendislik Makina İnş. İml. San. ve Tic. Ltd. Şti.
Corner Bead Production Lines
General Machine ManufacturingCematek corner-bead production lines make plaster corner beads, gypsum corner beads and depth-gauge (ano) profiles used under plaster. The line is a universal layout with a decoiler, servo-fed pneumatic-clutch eccentric press, straightener, rollformer, cut-off unit and tilting table. Standard speed is 50 m/min for gypsum corner and gauge profiles and 24 m/min for plaster corner bead. Material is galvanized sheet, 0.25–0.50 mm thick and up to 80 mm wide. The decoiler is single-head with a 1,300 mm outside coil diameter. The eccentric press is 35 tonnes at 350 strokes/min, with an eight-face ball-guide and a stress-relieved H-frame. The rollformer has 6 conventional stations, manual roll change and about 30 minutes of profile setup. Drive is a Ç8620 gear train, the gearmotor is Yılmaz and the bearings are SKF, FAG or Timken. Cematek states that profiles from the line meet the performance criteria of EN 13658.
Ankara · Baskent Organized Industrial Zone
Cematek Mühendislik Makina İnş. İml. San. ve Tic. Ltd. Şti.
Gypsum Board Profile Production Lines
General Machine ManufacturingCematek gypsum-board profile lines produce the metal profiles used in wall and ceiling plasterboard frames. The line makes ceiling U and C (UD, CD), wall U and C (UW, CW), stud, track, main channel, furring channel and wall angle in the sizes required for the application. Profiles are galvanized sheet; dies and rolls are designed and made at Cematek. Standard speed is 60 m/min for unpunched profiles and 30 m/min for punched profiles. Maximum strip width is 197 mm and thickness is 0.30–0.60 mm. The decoiler is a braked, non-driven single head for a 1,300 mm outside coil diameter. The rollformer has 12 conventional stations; shafts and rolls are Ç4140 at 54–57 HRC and the drive is a Ç8620 gear train. The flying cut-off uses a Mitsubishi servomotor and an Italian hydraulic pump, with a length tolerance of +/-3 mm. PLC and drives are Siemens or Mitsubishi. Cematek states that profiles from the line meet the performance criteria of EN 14195.
Ankara · Baskent Organized Industrial Zone
Oğuzmak Mühendislik Gıda İnşaat Makina Sanayi ve Ticaret Ltd. Şti.
Airblow Blower
General Machine ManufacturingAirblow Blower series offer high performance in pneumatic conveying systems, water treatment plants and other industrial processes. With a durable structure and low energy consumption, they contribute to the plant. Features are high efficiency, low energy consumption, quiet operation, a long-lasting structure and easy maintenance. Since 2006 the blower series have been manufactured as fully domestic production and exported to many countries under the AIRBLOW brand.
Konya · Büyükkayacık Organized Industrial Zone
ARM Metal Makina Endüstri Ürünleri İç ve Dış Tic. Ltd. Şti.
Fully Automatic Liquid Filling Machine
General Machine ManufacturingThe fully automatic liquid filling machine is built with 2, 4, 6 or 8 nozzles according to the capacity of the product to be filled. The nozzle system is anti-drip and closes from the inside; product-contact parts are 316 stainless steel. A stainless or acetate conveyor belt and a proportional hydraulic system, with a cooling fan or a heat exchanger, can be applied on request. For foaming products there is a bottom-up filling system in which the nozzles do not touch the product. The machine is PLC controlled, with a touch screen and recipe screen, and the cylinders are specially honed. Capacities stated on the site are 1,800 pieces per hour with 4 nozzles, 2,400 with 6 nozzles and 3,000 with 8 nozzles.
İstanbul · Ikitelli Organized Industrial Zone