Product description
More from this company
Cematek Mühendislik Makina İnş. İml. San. ve Tic. Ltd. Şti.
Corner Bead Production Lines
General Machine ManufacturingCematek corner-bead production lines make plaster corner beads, gypsum corner beads and depth-gauge (ano) profiles used under plaster. The line is a universal layout with a decoiler, servo-fed pneumatic-clutch eccentric press, straightener, rollformer, cut-off unit and tilting table. Standard speed is 50 m/min for gypsum corner and gauge profiles and 24 m/min for plaster corner bead. Material is galvanized sheet, 0.25–0.50 mm thick and up to 80 mm wide. The decoiler is single-head with a 1,300 mm outside coil diameter. The eccentric press is 35 tonnes at 350 strokes/min, with an eight-face ball-guide and a stress-relieved H-frame. The rollformer has 6 conventional stations, manual roll change and about 30 minutes of profile setup. Drive is a Ç8620 gear train, the gearmotor is Yılmaz and the bearings are SKF, FAG or Timken. Cematek states that profiles from the line meet the performance criteria of EN 13658.
Ankara · Baskent Organized Industrial Zone
Cematek Mühendislik Makina İnş. İml. San. ve Tic. Ltd. Şti.
Gypsum Board Profile Production Lines
General Machine ManufacturingCematek gypsum-board profile lines produce the metal profiles used in wall and ceiling plasterboard frames. The line makes ceiling U and C (UD, CD), wall U and C (UW, CW), stud, track, main channel, furring channel and wall angle in the sizes required for the application. Profiles are galvanized sheet; dies and rolls are designed and made at Cematek. Standard speed is 60 m/min for unpunched profiles and 30 m/min for punched profiles. Maximum strip width is 197 mm and thickness is 0.30–0.60 mm. The decoiler is a braked, non-driven single head for a 1,300 mm outside coil diameter. The rollformer has 12 conventional stations; shafts and rolls are Ç4140 at 54–57 HRC and the drive is a Ç8620 gear train. The flying cut-off uses a Mitsubishi servomotor and an Italian hydraulic pump, with a length tolerance of +/-3 mm. PLC and drives are Siemens or Mitsubishi. Cematek states that profiles from the line meet the performance criteria of EN 14195.
Ankara · Baskent Organized Industrial Zone
Related products
Elmalı Makina Sanayi ve Ticaret Ltd. Şti.
Hydraulic Press Brake
Press BrakeThe hydraulic press brake EHAP series is listed from EHAP-4x1300 to EHAP-12x4100. Bending force runs from 30 ton to 300 ton, bending length from 1300 mm to 4100 mm, bending capacity from 4 mm to 12 mm and stroke from 125 mm to 250 mm. EHAP-4x1300 has 80 mm/s approach, 10 mm/s bending and 70 mm/s return, 4 kW total motor power and a weight of 2000 kg. EHAP-12x4100 has 80 mm/s approach, 7 mm/s bending and 50 mm/s return, 30 kW motor power and a weight of 14500 kg. Standard equipment is a steel-construction frame, standard upper and lower tools, a digital NC that programs stroke and back-gauge axes together, a ball-screw back gauge, Promecam clamping, front support arms, a two-speed cycle and a pressure switch. Options are segmented hardened tools, special bending tools, a light curtain, a rear safety guard, non-standard throat depth and CE conformity.
Konya
İnanlar Makina İmalat Sanayi ve Ticaret A.Ş.
PRESTIGE CNC Hydraulic Press Brake
Press BrakePRESTIGE CNC hydraulic press brakes are supplied as standard with three axes (Y1, Y2 and X); the R axis is manual. The controller is a Cybelec CybTouch 12 2D or a Step Automation SA12 2D graphic screen. The hydraulic system is Bosch Rexroth or Hoerbiger. Standard equipment includes a front light-curtain finger guard, photocell rear guarding, interlocked side doors, European-style segmented upper and lower tools, a Promecam quick-clamp system, sliding front supports and a movable control arm. The foot pedal and electrical cabinet are stated as CE compliant. Manual crowning is given on machines up to 300 tons, and motorized crowning on 400-ton and 6-metre machines. The Start-Stop series is described as using 40% less energy than a conventional press brake, with a 63 dB noise level. Capacities shown on the site include 135 tons at 3 metres, 1250 tons at 4 metres and 2000 tons at 14 metres.
Konya
Isıtan Makine San. ve Tic. A.Ş.
EB Series 2-Axis (X+Y) NC Controlled Hydraulic Press Brakes
Press BrakeDouble-cylinder NC controlled hydraulic press brake series comprising the EB-1230, EB-1540, EB-2160 and EB-2690 models. It uses a HAWE or REXROTH hydraulic unit, SIEMENS, PIZZATO and BALLUF electrical equipment and a LEUZE safety system; the NC unit stores 500 programs with up to 200 lines each. The motorised X-axis backgauge on linear guides travels 500 mm with 0.2 mm accuracy; a motorised R axis and motorised crowning are optional.
Bursa
Durmazlar Makina
Press Brake
Press BrakePress Brake.
Bursa · NOSAB Organized Industrial Zone