Cematek Mühendislik Makina İnş. İml. San. ve Tic. Ltd. Şti.
Cematek designs and produces metal working machinery, roll forming lines for open profiles, and petroleum machinery and equipment, and has done so since 2005.
About
Production profile
Company type
Activity types
Production capabilities
Materials worked
Manufacturing processes
Certifications
Export profile
Industries served
Activity categories
Target export markets
Map
Location is approximate, based on the address. · © OpenStreetMap
Factory gallery
Products
Gypsum Board Profile Production Lines
Cematek gypsum-board profile lines produce the metal profiles used in wall and ceiling plasterboard frames. The line makes ceiling U and C (UD, CD), wall U and C (UW, CW), stud, track, main channel, furring channel and wall angle in the sizes required for the application. Profiles are galvanized sheet; dies and rolls are designed and made at Cematek. Standard speed is 60 m/min for unpunched profiles and 30 m/min for punched profiles. Maximum strip width is 197 mm and thickness is 0.30–0.60 mm. The decoiler is a braked, non-driven single head for a 1,300 mm outside coil diameter. The rollformer has 12 conventional stations; shafts and rolls are Ç4140 at 54–57 HRC and the drive is a Ç8620 gear train. The flying cut-off uses a Mitsubishi servomotor and an Italian hydraulic pump, with a length tolerance of +/-3 mm. PLC and drives are Siemens or Mitsubishi. Cematek states that profiles from the line meet the performance criteria of EN 14195.
CNC Model PB 40
CNC Model PB 40 is a CNC hydraulic press brake with a 1,250 mm bending length, 40 tonnes of bending force and a maximum bending thickness of 4 mm. The frame is welded steel with precision-machined long guideways and an epoxy-based AKZO finish. The hydraulic unit uses Hoerbiger prefill and proportional valves, an Italian or German pump and two cylinders. The ESA S 530 controller is a 3-axis CNC: the X axis runs the back gauge and the Y1 and Y2 axes control the bend angle, which is entered on the screen. Electrical components are Siemens, Moeller or Telemecanique and the motor is Yılmaz or Gamak. Standard tooling is a segmented top tool and a one-piece bottom die, with a foot pedal and a linear scale. A safety light curtain, R axis, special tools and CE documentation are optional.
Corner Bead Production Lines
Cematek corner-bead production lines make plaster corner beads, gypsum corner beads and depth-gauge (ano) profiles used under plaster. The line is a universal layout with a decoiler, servo-fed pneumatic-clutch eccentric press, straightener, rollformer, cut-off unit and tilting table. Standard speed is 50 m/min for gypsum corner and gauge profiles and 24 m/min for plaster corner bead. Material is galvanized sheet, 0.25–0.50 mm thick and up to 80 mm wide. The decoiler is single-head with a 1,300 mm outside coil diameter. The eccentric press is 35 tonnes at 350 strokes/min, with an eight-face ball-guide and a stress-relieved H-frame. The rollformer has 6 conventional stations, manual roll change and about 30 minutes of profile setup. Drive is a Ç8620 gear train, the gearmotor is Yılmaz and the bearings are SKF, FAG or Timken. Cematek states that profiles from the line meet the performance criteria of EN 13658.
Services
Machine Spare Parts
Spare parts sit on the same Cematek contact row as technical service, at +90 530 248 26 08; the accounts extension is +90 312 640 16 50 ext. 13. Parts are for the NC and CNC hydraulic press brakes, corner-bead and gypsum-board profile lines, special-purpose rollform lines, surface pumping units and wireline units that Cematek builds. The company profile states that exported machines are supported with spare parts and technical service through its dealers. The department is published on the same contact page as the Malıköy plant in Başkent OSB, Ankara.
Special-Purpose Machines and Rollform Systems
Cematek designs and builds special-purpose machines and rollform systems to the customer’s request at its own plant. This range includes lines for automatic industrial door profiles, supermarket shelves and perforated metal ceiling tiles. A combined profile line that makes both corner bead and gypsum-board profiles on one line is also part of the design and build programme. Rollformers are supplied as a conventional mill, a cassette quick-change mill, or a duplex mill with stations that open and close automatically for different profile base sizes. Design and manufacture are carried out at the Cematek plant in Başkent OSB, Ankara.
After-Sales Technical Service
Cematek lists technical service and spare parts as its own department, on +90 530 248 26 08. The company states that the metal-working machines, profile lines and petroleum equipment built at its Başkent OSB plant in Ankara are exported to 30 countries and supported through dealers that have experienced technical service. The English company profile says service is given by technicians and dealers. After-sales support covers the press brakes, rollform lines and petroleum machines Cematek manufactures.