Product description
More from this company
Aspar Asansör Aksamları Pazarlama San. Tic. A.Ş.
OSG HS Bi-Directional Overspeed Governor
Special MachineryOSG HS is Aspar’s bi-directional overspeed governor in the elevator safety-equipment class. For type OSG HS the minimum rated speed is 2 m/s and the maximum rated speed is 3 m/s; the minimum sheave diameter is Ø300 mm and the rated rope diameter dnom is 6-8 mm. Bearings are double sealed ball bearings; travel direction is up and down. The governor is safety equipment under Lift Directive 2014/33/EU and complies with EN 81-20/50. Technical details are published in the company’s user-manual PDF.
Ankara · OSTIM Organized Industrial Zone
Aspar Asansör Aksamları Pazarlama San. Tic. A.Ş.
ASPAMID KP Series Plastic Pulleys
Plastic Components ProductThe ASPAMID KP series is Aspar’s plastic pulley line in the elevator sheaves and accessories group. The product page states a diameter range of Ø120 mm to Ø640 mm. The company publishes an ASPAMID pulley test report and records about 1850 sheave models in its corporate profile. Technical details are in the product PDF; pulleys are catalogued together with diverting, block and traction sheaves.
Ankara · OSTIM Organized Industrial Zone
Related products
Şenbak Makina ve Otomotiv Sanayi ve Ticaret Ltd. Şti.
10 Ton Hydraulic Tensioning System
General Hydraulics & PneumaticsŞenbak Makina manufactures hydraulic systems that tension the saw blades used on gang saws cutting block stone in the marble sector. The 10-ton hydraulic tensioning system combines a SENBAK ton/bar gauge unit, clamp set and tension screws to tension blades on the gang saw. It is produced at the 5,000 m² plant in İzmir Torbalı OSB; incoming material with analysis reports is laboratory-tested before production.
İzmi̇r · Yeniköy Organized Industrial Zone
Şenbak Makina ve Otomotiv Sanayi ve Ticaret Ltd. Şti.
12 Ton Hydraulic Tensioning System
General Hydraulics & PneumaticsThe 12-ton hydraulic tensioning system is one of the hydraulic lines Şenbak builds to tension saw blades that cut block stone on gang saws. A double-row tensioning beam, SENBAK-gauged hydraulic unit and multiple clamp seats are intended to hold blades under even tension. Production is at the 5,000 m² plant in İzmir Torbalı Organized Industrial Zone; materials are laboratory-tested before machining.
İzmi̇r · Yeniköy Organized Industrial Zone
Şenbak Makina ve Otomotiv Sanayi ve Ticaret Ltd. Şti.
Gang Saw Clamp
General Hydraulics & PneumaticsGang-saw clamps (katrak maşası) are part of Şenbak Makina’s core range; the site title is Gang-Saw Clamp and Hydraulic Tensioning System. The grey clamp sets are used to hold and tension the blades that cut block stone on the gang saw. They are produced together with the hydraulic tensioning system at the 5,000 m² Torbalı OSB plant; incoming material is checked in the in-house laboratory against analysis reports.
İzmi̇r · Yeniköy Organized Industrial Zone
GAP Kompresör
Screw Air Compressor
General Hydraulics & PneumaticsScrew air compressors are the second homepage group. Inverter compressor systems are an energy-efficiency item in the FAQ. Service is described for industrial plants and SMEs. GAP Kompresör lists this item as a published product/service group on https://gapkompresor.com; the plant/office address is İkitelli OSB Metal-İş Sanayi Sitesi Metro 34 İş Merkezi No:6, Başakşehir / İstanbul.
İstanbul · Ikitelli Organized Industrial Zone