Alkor Solar Sistemleri
Both aesthetic and robust solar panel carrier systems suitable for all kinds of roofs (sloping-flat) and land structures.
About
Production profile
Company type
Activity types
Production capabilities
Materials worked
Manufacturing processes
Certifications
Export profile
Industries served
Activity categories
Factory gallery
Products
Mounting System With 2 Vertical Panels on Concrete
Alkor has been produced as a solution to land type GES projects. It can be applied to all kinds of land types with the concrete floor it is on. It has 2 vertical panel layouts, is compatible with all panel sizes and has an angle of 30°. It can be applied to all floors thanks to installation on a concrete floor. Clamps are compatible with all panel types; two pieces are applied to the right and left parts of the panel. Minimum 2x4 and maximum 2x20 vertical panel layout, double column structure, concrete-floor application and 6063 aluminum manufacture are specified.
West-East Side Mounting System on Flat Roof
Alkor has been produced as a solution to flat roof type solar roof projects. East-West construction has been produced as a solution for roofs on all kinds of flat floors. 4 panels, 2x2, can be applied to each construction. It has an angle of 15°. The adjustable length of the clamps is suitable for all panel types; two pieces are applied to the right and left parts of the panel. It is applied with a concrete weight system, long profiles and triangular legs. It is produced from 6063 aluminum and acts on a flat surface with 3 profiles.
Component Profile on Sandwich Panel - Horizontal Layout
Alkor has been produced as a solution to solar roof projects in sandwich panel structure, for roofs of all kinds of sandwich panel types with adjustable-length profiles. Clamps are compatible with all panel types with adjustable length; two pieces are applied to the right and left parts of the panel. Aluminum profiles are applied between 2 ribs. Projecting is done by choosing the most suitable profile type for the roof. It provides a solution with the profile length suitable for the roof type, maximum strength with 4-point rib connection, piece-length profiles and horizontal placement, and is produced from 6063 aluminum.
Services
Solar Mounting System Project Engineering
Product pages state that projecting is done by choosing the most suitable profile type for the roof. The homepage says to ask with accurate analysis, virtual reality tests of the whole project, original raw materials, production power and 2000 MW of experience. Clamps and profile height variants are selected for different roof and land types; pitched-roof, flat-roof and ground constructions are engineered from this analysis.
Custom Design and Product Development
Alkor Solar is focused on the manufacture and sales of solar mounting systems for all types of roofs, free-standing, and custom designs. Products at Alkor Solar are the result of the collective work of engineers, related units of the university and accredited laboratories. The site states 25,000 m² of field, 250+ molds and 2000 MW of experience; products are developed through this engineering and laboratory process.
Mechanical Operation and Field Installation
Certificates issued to Alkor Alüminyum Enerji İnşaat list the scope as manufacturing of aluminum profile, manufacturing of aluminum profile systems for solar technology, mechanical operation and field installation, eloxal coating and electrostatic powder painting. Current projects listed on the site include Dk Mekanik 166 kWp, Adıyaman 7.8 MWp, İzmir 98 kWp, Çanakkale 198 kWp, Fina Enerji 378 kWp, Finland 2 MWp and Sivas 500 kWp.