Nehir Kazan Makina Sanayi

Ankara · Yenimahalle

Visit Website Directions
Nehir Kazan Makina Sanayi factory
Verified
Nehir Kazan Makina Sanayi logo

Nehir Kazan Makina Sanayi

Ankara · Yenimahalle · OSTIM Organized Industrial Zone

In Ankara OSTİM: fuel tanks, hot-water cylinders, heat exchangers, heating and steam boilers, plus repair, maintenance and installation.

About

The company operates in Ankara OSTİM Organized Industrial Zone. Its main production covers underground and aboveground fuel tanks, hot-water cylinders and heat exchangers, heating and steam boilers, and repair, maintenance and installation of those products. With 10 years of boiler manufacturing and sales experience, Nehir Kazan Makina Sanayi provides after-sales service, installation and assembly as well as the products themselves. In Ankara it serves institutions, housing estates and residences with boiler manufacturing, heating-boiler repair and service. Boiler and tank production follows the relevant product standards. Raw and auxiliary materials conform to those standards and are certified. Underground and aboveground fuel tanks are manufactured with TSE certification, and installation, repair and service staff are certified with at least 10 years of manufacturing experience.

Production profile

Company type

Manufacturer

Activity types

Production Custom Manufacturing Assembly Technical Service

Production capabilities

Storage Tanks On-Site Repair Fire-Tube Steam Boiler Custom Pressure Vessels Workshop Repair Storage Vessels Custom Tank Fabrication Industrial Steam Boiler

Materials worked

Stainless Steel Carbon Steel Galvanized Steel

Technical standards

DIN

Certifications

ISO 9001 TSE

Industries served

Energy Construction Machinery Manufacturing

Activity categories

© OpenStreetMap

Factory gallery

Nehir Kazan Makina Sanayi

Products

Condensate Tank — Nehir Kazan Makina Sanayi

Condensate Tank

In plants that use steam, the condensate tank stores condensate returning after the steam has given up most of its heat and sends that feedwater back to the boiler. It is built in horizontal and vertical types, and a heater is added when the water in the tank must be heated. Material and plate thickness are chosen from design calculations for the operating pressure. After two coats of anti-rust primer it is insulated with glass wool if requested and clad in galvanized, aluminium, DKP or stainless sheet.

Cylindrical Solid-Fuel Steam Boiler — Nehir Kazan Makina Sanayi

Cylindrical Solid-Fuel Steam Boiler

This is a cylindrical Scotch-type solid-fuel industrial steam boiler with fire and smoke tubes and three passes, in the range of 300 kg/h to 10,000 kg/h. Working pressure is set to the customer’s need between 0.5 bar and 20 bar; diameter is 1,300 mm to 3,000 mm and test pressure is 3 bar to 30 bar. Smoke tubes are St 35.8 to DIN 2448, and insulation is 80 kg/m², 10 cm rock wool covered with galvanized sheet. The package includes the boiler, level and pressure controls, condensate tank, burner or stoker, spring and deadweight safety valves, blowdown valve, water softener and control panel; every steam boiler manufactured is warranted for 2 years.

Cylindrical Liquid and Gas Fired Steam Boiler — Nehir Kazan Makina Sanayi

Cylindrical Liquid and Gas Fired Steam Boiler

This is a cylindrical Scotch-type liquid- and gas-fired industrial steam boiler with fire and smoke tubes and three passes, in the range of 500 kg/h to 10,000 kg/h. Working pressure is set to the customer’s need between 0.5 bar and 20 bar; diameter is 1,300 mm to 3,000 mm and test pressure is 3 bar to 30 bar. Smoke tubes are St 35.8 to DIN 2448, and insulation is 80 kg/m², 10 cm rock wool covered with galvanized or stainless sheet. The package includes the boiler, level and pressure controls, condensate tank, burner or stoker, spring and deadweight safety valves, blowdown valve, water softener and control panel; every steam boiler made at Nehir Kazan is warranted for 2 years.

Services

Steam Boiler Repair — Nehir Kazan Makina Sanayi

Steam Boiler Repair

On fire-tube steel steam boilers, flame and smoke tubes typically wear and leak within 7–10 years depending on duty and materials; retubing lets the boiler run another 7–10 years. When the shell still has life, the old tubes are removed without damaging the tube plate and replaced with seamed or seamless boiler tubes allowed by the relevant standards. Tubes are fitted by expanding (makinato) or by welding, matching how the boiler was built. Flame and smoke tubes have a minimum wall of 3.2 mm and are cold-drawn or annealed boiler tube.

Steam Boiler and Tank Manufacturing — Nehir Kazan Makina Sanayi

Steam Boiler and Tank Manufacturing

Nehir Kazan Makina Sanayi, operating in Ankara OSTİM Organized Industrial Zone, manufactures underground and aboveground fuel tanks, hot-water cylinders and heat exchangers, and heating and steam boilers. Raw and auxiliary materials used in boiler and tank production conform to the relevant product standard and are certified. Underground and aboveground fuel tanks are manufactured with TSE certification. Boiler and tank production is carried out to the applicable product standards.

Boiler Installation and Assembly — Nehir Kazan Makina Sanayi

Boiler Installation and Assembly

With 10 years of boiler manufacturing and sales experience, Nehir Kazan Makina Sanayi supplies after-sales service, installation and assembly as well as the equipment itself. In Ankara it provides boiler manufacturing, heating-boiler repair and service to institutions, housing estates and residences. Installation, repair and service staff are certified and have at least 10 years of manufacturing experience.

Ready to Find Your Next Manufacturing Partner?

Explore Turkish manufacturers and industrial suppliers on TurkIndustry. Discover potential sourcing partners, submit RFQs and compare quotations — all from one platform.

Start Sourcing Today →